Table of Contents

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

(Mark One)

 

     ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the fiscal year ended December 31, 2020

 

or

 

☐     TRANSITION REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

  

Commission file number 333-193087

 

FOCUS UNIVERSAL INC.

(Exact name of registrant as specified in its charter)

 

Nevada   46-3355876
(State or other jurisdiction of   (I.R.S. Employer Identification No.)
Incorporation or organization)    
     

 

2311 East Locus Street, Ontario, CA   91761
(Address of principal executive offices)   (Zip Code)

 

Registrant’s telephone number, including area code (626) 272-3883

 

Securities registered under Section 12(b) of the Exchange Act:

 

Title of each class  

Name of each exchange on

which registered

Common Stock    
$0.001 par value   None

 

Securities registered under Section 12(g) of the Exchange Act:

 

None

(Title of class)

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act Yes ☐    No ☒ 

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. ☐ 

 

Indicate by check mark whether the registrant (1) filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes☒   No ☐ 

 

Indicate by check mark whether the registrant has submitted electronically, if any, every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒   No ☐ 

 

Indicate by check mark if disclosure of delinquent filers in response to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendments to this From 10-K. ☐ 

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer ☐    Accelerated filer ☐ 
Non-accelerated filer ☐  Smaller reporting company  ☒ 
(Do not check if a smaller reporting company)  Emerging growth company ☒ 

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.   ☐

 

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  ☐

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes ☐   No ☒ 

 

As of March 22, 2021, the date immediately preceding the filing of this Annual Report, the aggregate market value of voting stock held by non-affiliates of the registrant, based on the closing price of the Over-The-Counter QB of $4.25 per share, at which the common equity was sold, was $174,078,899.

 

The number of shares outstanding of the registrant’s common stock, $0.001 par value, outstanding as of March 23, 2021: 40,959,741.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

None.

 

 

 

 

   

 

 

TABLE OF CONTENTS

 

  Part I Page No.
     
Item 1. Business 1
     
Item 1A. Risk Factors 25
     
Item 1B. Unresolved Staff Comments 42
     
Item 2. Properties 42
     
Item 3. Legal Proceedings 42
     
Item 4. Mine Safety Disclosures 42
     
  Part II  
     
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities 43
     
Item 6. Selected Financial Data 44
     
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations 44
     
Item 7A. Quantitative and Qualitative Disclosures About Market Risk 56
     
Item 8. Financial Statements and Supplementary Data F-1
     
Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure 57
     
Item 9A. Controls and Procedures 57
     
Item 9B. Other Information 58
     
  Part III  
     
Item 10. Directors, Executive Officers and Corporate Governance 59
     
Item 11. Executive Compensation 64
     
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters 67
     
Item 13. Certain Relationships and Related Transactions, and Director Independence 68
     
Item 14. Principal Accounting Fees and Services 69
     
  Part IV  
     
Item 15. Exhibits, Financial Statement Schedules 70
     
Item 16. Form 10-K Summary 70
     
  Signatures 71

 

 

 

 

 i 

 

 

FOCUS UNIVERSAL INC.

 

FORWARD LOOKING STATEMENTS

 

This Annual Report contains forward-looking statements. Forward-looking statements are projections of events, revenues, income, future economic performance or management’s plans and objectives for our future operations. In some cases, you can identify forward-looking statements by terminology such as “may”, “should”, “expects”, “plans”, “anticipates”, “believes”, “estimates”, “predicts”, “potential” or “continue” or the negative of these terms or other comparable terminology. These statements are only predictions and involve known and unknown risks, uncertainties and other factors, including the risks in the section entitled “Risk Factors” and the risks set out below, any of which may cause our or our industry’s actual results, levels of activity, performance or achievements to be materially different from any future results, levels of activity, performance or achievements expressed or implied by these forward-looking statements. These risks include, by way of example and not in limitation:

 

  · the uncertainty of profitability based upon our history of losses;

 

  · risks related to failure to obtain adequate financing on a timely basis and on acceptable terms to continue as going concern;

 

  · risks related to our international operations and currency exchange fluctuations; and

 

  · other risks and uncertainties related to our business plan and business strategy.

 

This list is not an exhaustive list of the factors that may affect any of our forward-looking statements. These and other factors should be considered carefully, and readers should not place undue reliance on our forward-looking statements. Forward-looking statements are based on management’s beliefs, estimates and opinions on the date the statements are made, and we undertake no obligation to update forward-looking statements if these beliefs, estimates and opinions or other circumstances should change. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee future results, levels of activity, performance or achievements. Except as required by applicable law, including the securities laws of the United States, we do not intend to update any of the forward-looking statements to conform these statements to actual results.

 

Our financial statements are stated in United States dollars (US$) and are prepared in accordance with United States Generally Accepted Accounting Principles. All references to “common stock” refer to the common shares in our capital stock.

 

As used in this annual report, the terms “we”, “us”, “our”, the “Company” and “Focus Universal” mean Focus Universal Inc. unless otherwise indicated.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 ii 

 

 

PART I

 

Item 1. BUSINESS

 

Company Background.

 

Focus Universal Inc. (the “Company,” “we,” “us,” or “our”) is a Nevada corporation. We have developed four fundamental disruptive proprietary technologies which solve the most fundamental problems plaguing the internet of things (“IoT”) industry through: (1) increasing overall chip integration by shifting it to the device level; (2) creating a faster 5G cellular technology by using Ultra-narrowband technology; (3) leveraging ultra-narrowband power line communication (“PLC”) technology; and (4) User Interface Machine auto generation technology.

 

A new IC frontier: increasing IC integration directly at the device level

 

  1. We push beyond the current integrated chip limits with our device on a chip technology – which increases the overall degree of chip integration by shifting integration from the component level directly to the device level

 

We have developed an innovative and proprietary “device on a chip” (“DoC”) technology, which combines the required electronic circuits of various integrated circuit components onto a single, integrated chip (“IC”). Our DoC technology works as a single component but is capable of handling entire IoT device functions. Our DoC technology includes both the hardware and software, uses less power, has better performance, includes smaller overall devices, and offers greater reliability in spite of decreasing the number of interconnections between components. We believe that implementing our DoC technology will allow our products to have a faster time-to-market than our competitors, lower the cost, and simplify production than our competitors’ multi-chip devices. Our DoC technology allows devices to achieve interoperability with one another and interchangeability which traditional IoT devices are unable to achieve.

 

Our research and development identified that the current IC integration in IoT devices focuses on pure hardware-to-hardware integration. The lack of incorporating software such as a common operating system, application software and extra interface into ICs limits IC integration only to the component level. Software is a critical component in electronics, and the more tightly integrated the software, the better the power and performance. Software also adds an element of flexibility and allows multiple discrete ICs which in the past were unable to be further integrated into a single IC.

 

Unfortunately, only customized hardware and software are currently available, and customized hardware and software integration leads to a custom IC fabrication which is too expensive to manufacture on a large scale. IC is ideally designed for products that are intended for mass production to keep manufacturing costs low by producing uniform products using repetitive and standardized processes. Product standardization has become a major bottleneck in device-level IC fabrication because most devices are custom-designed and manufactured.

 

The Universal Smart Instrumentation Platform (“USIP”) we developed is a standardized, universal hardware and software integration platform, that provides a universal common foundation for what we anticipate will be thousands of IoT and standalone devices. Electronic design and production starts from a 90% completed USIP instead of the components. USIP allows ICs to be integrated from the component level up to the device level and pushes the frontier of semiconductor technology beyond Moore’s law allowing the principle of Moore’s Law to continue.

 

 

 

 1 

 

 

 

 

Figure 1. From USIP to device level integrated circuits.

 

  2. Our Ultra-narrowband (“UNB”) technology breaks through the Shannon Law’s critical limit which current 5G cellar communication is reaching

 

Fifth generation (“5G”) telecommunications networks will revolutionize the digital economy by enabling new applications that depend on ultra-fast communications on an industrial scale. 5G promises to deliver an improved end-user experience by offering new applications and services through gigabit speeds, and significantly improved performance and reliability. 5G will build on the successes of 2G, 3G and 4G mobile networks, which have transformed society, supporting new services and new business models. 5G provides an opportunity for wireless operators to move beyond providing connectivity services, to developing rich solutions and services for consumers and industry across a wide range of sectors at an affordable cost. 5G is an opportunity to implement wired and wireless converged networks and offers in particular opportunities in integrating network management systems. The United States and China are in a race to deploy 5G, wireless networks, and the country that gets there first will lead in standard-setting, patents, and the global supply chain. A recent World Economic Forum report concluded that 5G networks will contribute $13.2 trillion in economic value globally and generate 22.3 million jobs from direct network investments and residual services.1 5G networks and their related applications are expected to add three million jobs and $1.2 trillion to the economy in the U.S.2 Though 5G offers a significant increase in speed and bandwidth, its more limited range will require further infrastructure. Higher frequencies enable highly directional radio waves, meaning they can be targeted or aimed. The challenge is that 5G antennas, although able to handle more users and data, can only beam out over shorter distances.

 

Unlike 4G LTE, which operates on established frequency bands below 6GHz, 5G requires frequencies up to 300GHz. Wireless carriers still need to bid for the costly higher spectrum bands, as they build and roll out their respective 5G networks. Adding the necessary hardware required for 5G networks can significantly increase operating expenses. Building 5G networks is expensive. According to Heavy Reading’s Mobile Operator 5G Capex, total global spending on 5G is set to reach $88 billion by 2023. 3

 

 

 

 

 

 

 

 

____________________________________

 

1 http://www3.weforum.org/docs/WEF_The_Impact_of_5G_Report.pdf

2 https://www.marketsandmarkets.com/Market-Reports/power-line-communication-plc-market-912.html (last accessed on February 9, 2021)

3 Heavy Reading, Report, “Mobile Operator 5G Capex Forecasts: 2018-2023” available at: http://www.heavyreading.com/details.asp?sku_id=3568&skuitem_itemid=1789 (last accessed on January 24, 2021).

 

 

 

 2 

 

 

Figure 2. Mobile Operator 5G Capex Forecasts: 2018-2023.

 

A typical 5G base station consumes up to twice or more the power of a 4G base station. Energy costs can grow even more at higher frequencies, due to a need for more antennas and a denser layer of small cells. Edge computing facilities needed to support local processing and new internet of things (IoT) services will also add to overall network power usage.

 

Figure 3. Site Power requirements 2G, 2-4G and 5G.

 

Select 5G base stations in China are being powered off every day from 21:00 to next day 9:00 to reduce energy consumption and lower electricity bills. 5G base stations are truly large consumers of energy such that electricity bills have become one of the biggest costs for 5G network operators.

 

Ultra-narrowband Modulation was conceived in 1985 as a method to be used with’ frequency modulation (FM) Sub-Carriers’ (as opposed to ‘FM Supplementary Carriers’, or ‘In Band On Channel’ Carriers). In its original form, data rates as high as 196 kb/s were obtained from a subcarrier at 98 kHz. A pulse width modulation baseband encoding method called the “Slip Code” was used. That method, which was basically a baseband method, was limited in data rate and required excessive filtering, which precluded it from being a practical Ultra-narrowband method. Bandwidth efficiencies as high as 15 bits/sec./Hz were being achieved, Dr. Harold R. Walker is the ultra-narrowband pioneer.

  

 

 

 3 

 

 

Ultra-narrowband (“UNB”) technology employs an ultra-narrow spectrum channel (<1KHz) to establish an ultra-long-distance link between transmitter and receiver. It allows the long-range coverage which makes it a most suitable low-power wide-area network technique for industrial IoT systems. Additionally, its ultra-high power spectral density creates endurance against interference and jamming, which enables friendly coexistence of UNB on shared frequency bands. The narrower the bandwidth, the fewer noise and interference, in addition, the transmission energy concentrates on ultra-narrowband width, and results in a very high concentration of power in a very narrow frequency band.

 

Figure 4. Comparison between Ultra-narrowband and Broadband

 

Many traditional modulation approaches require allowance for upper and lower sidebands throughout the carrier frequency. UNB modulation is a modified approach for data transmission without sidebands. UNB is extremely robust in an environment with other signals, including spread spectrum signals. However, spread spectrum networks are affected by UNB signals.

 

UNB modulation utilizes a coded baseband with abrupt edges. Any bandpass filter used at the transmitter for ultra-narrowband modulation must exhibit zero group delay to pass the instantaneous phase changes, though it may lack the bandwidth required to pass instantaneous changes in frequency. Conventional filters cannot be used with Ultra-Narrowband signals, which are absolutely dependent upon Negative or Zero group delay filters.

 

There is one important characteristic which is holding up widespread adoption of Ultra-Narrowband modulation, and that is the zero group delay filters which are complex and must be hand tuned.

 

We developed an ultra-narrowband technology which offers a potential alternative to broadband technology used in 5G and meets the challenging 5G demands. A comparison with 4G and 5G is given:

 

Technology Bandwidth No. of subcarriers Operating Frequency Speed Spectral
  MHz   GHz Mbps Bits/s/Hz
4G 20 1200 6 4-60 6
5G 100 3276 Up to 300 40-1100 10
UNB (finished) 0.001 1 0.004 4 ~4000
UNB (in development) 0.001 1 0.064 64-256 >4000

 

 

 

 4 

 

 

UNB speed will increase proportionally if it operates at higher frequency like 4G or 5G did, or adopts multiple subcarriers, which is equivalent to increasing bandwidth. Utilizing the same bandwidth, UNB can saved energy up to 20,000 times for 4G and 100,000 times for 5G. Keeping the same bandwidth and energy consumption, the coverage can increase two orders of magnitude. UNB Breaks through the Shannon Law’s critical limit which current 5G cellar communication is reaching, overcomes the current 5G challenges and allowing cellar communication development beyond 5G.

 

  3. We believe our Ultra-narrowband Power Line Communication (“PLC”), will revolutionize the fundamental IoT communication infrastructure

 

Our patented PLC is an innovative communication technology that enables sending data over existing power cables. It does not require substantial new investment for a dedicated wiring infrastructure. Instead, PLC uses the existing power lines. These power lines form a distribution network that already penetrates into every residential, commercial and industrial premises. Given that the power grid is an established ubiquitous network, connectivity via PLC is potentially the most cost-effective, scalable interconnectivity approach and the backbone communication infrastructure for the IoT. IoT devices plug into power outlets and establish a connection using the existing electrical wiring. This allows instruments to share data without the inconvenience of running dedicated network cables.

 

The primary design goal of the power line network is electric power distribution. It was not originally designed as a communication channel. Consequently, while PLC has been around for many years, the harsh electrical noise present on power lines and variations in equipment and standards make communications over the power grid difficult and present a number of fundamental challenges for data transfer. Signals propagating along the power line are subjected to very large amounts of noise, attenuation, and distortion that make them erratic, with several attributes varying over time. PLC is susceptible to noise from devices linked to the power supply infrastructure, for example, fluorescent tube lights, drills, hair dryers, microwave ovens, computers, switch mode power supply, cellphone chargers, dimmers, refrigerators, televisions, washing machines, and vacuum cleaners. The result being that previous implementations of PLC technology appear to have ended in power companies and internet service providers deciding that the technology is not viable as a means of delivering broadband internet access. The technological challenges have impeded, or even halted progress.

 

We have successfully developed ultra-narrowband PLC technology and achieved 4 Mbps at bandwidth less than 1000 Hz. In our interference testing, six industrial blowers were used and no significant interference was found. By comparison, a simple air dryer will render our competitors’ legacy technology completely useless. Our 4Mbps PLC modules have been completed, and printed circuit layouts have been sent for production. These modules will be used for IoT systems involving over 1,000 sensors. The higher communication speed PLC will be developed concurrently.

 

Ultra-narrowband PLC is a considerably more effective tool than current in-home network systems. Zigbee or Z-Wave will need new infrastructure to be installed. Moreover, penetrating physical barriers like walls within one floor, or reaching out to different floors is a challenge for current wireless technology that current IoT systems are using. Wireless networks often face performance issues, due to radio-frequency interference caused by devices like microwave ovens, cordless telephones or even Bluetooth devices at home. However, our PLC can reach out to every node connected via the power lines. Our technology converts virtually every standard wall socket into an access point, in many ways incorporating the best of wired and wireless communication.

 

  4. User Interface Machine auto generation technology - hardware defining software

 

We have developed a proprietary and patented “user interface machine auto generation platform” (“UIMAGP”), this cross-platform or multiple-platform, cross-operating-system platform is designated to simply the software development of 20 billion IoT devices, ranging from hardware embedded coding to user interface design. Our universal natural programming language we developed is the programming language used to build the IoT user interface. The programming language is similar to the language humans use amongst one another so that it is easy to learn but understood by a machine. Future software programming is expected to be enormously simplified to the maximum extent, with hundreds of thousands of lines of code simplified into a micro code which can be saved in the sensor module. When the sensor modules are plugged into the USIP, the user interface code saved at sensor modules are sent to the platform and a universal display such as a smartphone, a computer or display unit. The UIMAGP saved on the universal display automatically generates the user interface within milliseconds instead of requiring months or years of software development work. An embedded coding hardware engineer is able to design both sensor module hardware and provide the user interface micro code. Thus, the hardware defining software is achieved.

 

 

 

 5 

 

 

UIMAGP is similar in spirit to low code or no code programming in reducing the amount of traditional hand coding, enabling accelerated delivery of business applications. However, low code and no code programming suffer from integration restriction, absence of customization and security risks issues, making them not suitable for large-scale and mission-critical enterprise applications such as IoT applications. UIMAGP overcome these challenges and still preserve a minimum amount of coding. The UIMAGP and user interface micro codes work collectively to perform the function of the tradition customized software, enabling UIMAGP to be shared by the entire 20 billion IoT devices.4

 

  5. Universal Smart Instrumentation Platform (“USIP”)

 

Instrumentation is a huge industry which covers variety of fields including medical, healthcare, scientific, commercial, industrial, military and daily life. Lack of the instrumentation interoperability, compatibility and universality result in every instrument design starting from the scratch or components, each instrument is only able to carry out a determined measurement or control a specific operation. Integration of existing instruments which lack interoperability and compatibility into a platform can be difficult and expensive. This integration is impeded by the inability of instruments to easily communicate with devices and sensors for perception, mobility, and manipulation. As society enters the IoT era, it is not unreasonable to assume that millions of devices will need to be connected in one square kilometer, if each IoT device requires unique hardware and software developed from scratch, implementation in dense urban areas is simply not feasible.

 

USIP represents an advanced software and hardware integrated instrumentation platform and a large-scale modular design approach. USIP integrates a large number of technologies, including cloud technology, wired and wireless communication technology, software programming, instrumentation technology, artificial intelligence, PLC, sensor network and internet of things into a single platform and results in circuit designs that are orders of magnitude cheaper and faster than those constructed of discrete integrated circuit components from scratch.

 

USIP not only has primary functionalities but also an open architecture of incorporating variety of many individual instruments, functions, sensors and probes from different industries and vendors to the greatest extent possible into the same single unit as well. Instruments, sensors or probes from a few to several hundreds or even thousands in any combination from variety of industries and vendors share or reuse the same platform. Adding, removing or changing, instruments or sensors is all the platform requires to switch from one kind of device to another without revising the software and redesigning the hardware. Future instrument integration, design and manufacture are enormously simplified to the maximum extent, only the sensor modules are required to be replaced, designed and manufactured.

 

Compared to traditional stand-alone instruments, USIP exploits the processing power, productivity, display, and connectivity capabilities of computers or mobile devices and provide a more powerful, flexible, and cost-effective measurement solution. Traditional hardware-centered instrumentation systems are made up of multiple stand-alone instruments that are interconnected to carry out a determined measurement or control an operation. They have fixed vendor-defined functionality and their components that comprise the instruments are also fixed and permanently associated with each other. Different instruments provided by different vendors cannot be interoperated and interchanged. For example, we simply cannot use a traditional blood pressure meter to measure temperature or vice versa. USIP is designated to be compatible with all instruments, sensors or probes on the market and capable of monitoring and controlling any combination of instruments or sensors. It has brought a revolution to the field of instrumentation, measurement, control and automation.

 

USIP is a versatile instrument, able to do many different measurements and controls, substitutes for many other instruments and integrate existing instruments into it. The promise of USIP is closely associated with the development and proliferation of computers and mobile equipment which provide the fundamental foundation and major technical support to the universal smart instrument such as attractive graphical user touch screen interface, data processing and analysis capabilities, video and audio, cameras, GPS, ubiquitous wireless connectivity, AI, cloud based communications and almost unlimited functions or software available to the users that do not contain in the traditional instruments. These features embody the advantages of USIP which are lacking in the stand-alone instrument system. As compared with the traditional instrument, the best advantage of USIP is cost saving. Other distinctive features include universality, interoperability, flexibility, compatibility, upgradeability, expandability, scalability, security, modularity, fast prototyping, reducing inventory, plug-and-play operation, remote accessibility, simplification, standardization, cloud instrumentation.

 

____________________________________

 

4 Gartner Insights “Leading the IoT,” available at: https://www.gartner.com/imagesrv/books/iot/iotEbook_digital.pdf (last accessed February 9, 2021).

 

 

 

 6 

 

 

We have been dedicated to solving instrumentation interoperability for over a decade. We subdivide instruments into a reusable foundation component to the maximum extent and architecture-specific components, the sensor modules, which together perform the functions of traditional instruments at a fraction of its cost. USIP which presents to up 90% of the instruments, consists of universal and reusable hardware and software, these reusable hardware and software are the same for all the instruments.

 

USIP utilizes a computer or a mobile device as a display and control, communicates and works with a group of sensors, instruments, probes or controllers manufactured by different vendors in a manner that requires the user to have little or no knowledge of their unique characteristics.

 

The portable version of USIP is illustrated below, when a blood pressure sensor is plugged into universal device, the user interface specification code saved on the blood sensor module is sent the universal device and a computer or smartphone which will generate the user interfaces in the corresponding devices based on the interface specification code.

 

 

Figure 5. A blood pressure sensor is connected to our Universal Device we call the Ubiquitor and changes our device into a blood pressure measurement instrument.

 

Similarly, if we remove the blood pressure sensor and change to a pH sensor and a CO2 sensor, the universal device changes to a two-sensor device which is capable of measuring pH and CO2 concentration. Each sensor has its own user interface which is auto generated based on the user interface code saved in each sensor.

 

Figure 6. A pH sensor and a CO2 sensor are connected to our universal device and our device changes into a split-sensor device. A computer or smartphone can also be used for display.

 

 

 

 7 

 

 

 

Figure 7, A pH sensor, a CO2 sensor and a light sensor are connected to the universal device and change it to a 3-sensor device. A computer or smartphone can also be used for display.

 

 

Figure 8, any number of sensors in any combination are connected to the universal device and change it to a multiple sensor device. A computer or smartphone can also be used for the display.

 

The universal platform we built as illustrated in Figure 8, can control 27 light sensors, 21 pH sensors, 23 temperature humidity sensors which have 23 temperature sensors and 23 humidity sensors, representing one controller and a total of 72 devices and 95 sensors. Our controller controls 2 lights, and it can turn the light on or off. The controller also uses a light sensor to control the light, and the user can input the desired light intensity, running period and light output intensity.

 

 

 

 8 

 

 


 

Figure 9, Our universal platform simultaneously monitors and controls 72 distinct devices.

 

To illustrate, the entire horticulture industry only has a few hundred devices from different vendors for various measurement and control. One of our universal smart devices and corresponding sensors or actuators are capable of replacing all of them at a fraction of the cost.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 9 

 

 

 

Figure 10. Traditional horticulture measurement and control devices.

 

 

Figure 11. Universal Smart Device.

 

All of the household measurement and control devices such as air conditioner control, swimming pool control, garage door control, sprinkler control, lighting control, motorized curtain control, etc. can be replaced by a single universal smart device and corresponding unique accessories.

 

 

Figure 12. A single universal smart device can replace all the household control devices.

 

 

 

 10 

 

 

  6. Shared Distributed Universal Internet of Things.

 

IoT refers to the overarching network created by billions of internet-compatible devices and machines which share data and information around the world. According to a Gartner report, by the end of 2020, there were an estimated 20 billion IoT connected devices in use around the world.5 As the sophistication of both hardware and software in the consumer electronics industry skyrockets, an increasing share of the electronic devices produced around the world are manufactured with internet connectivity. Forecasts suggest that by 2030 around 50 billion of these IoT devices will be in use around the world, creating a massive web of interconnected devices spanning everything from smartphones to kitchen appliances.6 The IoT will have a great impact on the economy by transforming many enterprises into digital businesses and facilitating new business models, improving efficiency and increasing employee and customer engagement. It is foreseeable that the explosive IoT growth will rapidly deplete natural and human labor resources. We believe that IoT will soon reach the critical limit, we do not have enough human labor and natural resources to support IoT growth. 20 billion IoT devices are both challenges and resources. We have overcome the current massive IoT production challenges through our development of a shared distributed universal IoT. Billions of internet-compatible devices and machines not only share data and information around the world, but also share large section of hardware and software (up to 90%).

 

Billions of IoT devices are in use across the country, each with different terminologies, technical specifications, and functional capabilities. These differences make it difficult to create one standard interoperability format for acquiring, harmonizing, storing, accessing, analyzing and sharing data in near real-time. In fact, not even those instruments built on the same platform are necessarily interoperable because they are often highly customized to an organization’s unique workflow and preferences.

 

Wireless networks are far from perfect for IoT. They are typically slower, expensive and extremely susceptible to interference from radio signals and radiation. They can be accessed by any device within range of the network's signal so information transmitted through the network (including encrypted information) may be intercepted by unauthorized users. Walls and floors can seriously limit the range of the wireless network. Our proprietary Ultra-Narrowband power line communication technology offers a promising alternative to wireless networks. Integrating USIP with PLC results in significant simplification and cost saving in implement of IoT as illustrated in Figure 13.

 

 

Figure 13. Comparison between traditional machine to machine IoT (a) and shared distributed universal IoT (b). USIP and sensors form a local network through power line communication. The platform communicates with the cloud and forms a remote cloud-based system.

 

 

 

 

_____________________________________

 

5 Gartner Report “Leading the IoT: Gartner Insights on How. To Lead in a Connected World” available at: https://www.gartner.com/imagesrv/books/iot/iotEbook_digital.pdf (last accessed February 10, 2021).

6 Id.

 

 

 

 11 

 

 

 

 

Figure 14. (a) traditional wireless network and Focus Universal Inc’s PLC network.

 

How we will implement our business plan

 

Once we are fully capitalized, we will establish four divisions within our company to develop and promote our four fundamental technologies even further. We believe that these four technologies not only can be used in standalone device design and production, but also focus on massive scale IoT device design and production, aiming to solve the complexity and cost challenges.

 

a)    Ultra-narrowband power line communication division

 

Our ultra-narrowband PLC technology has achieved data transfer speeds of 4 megabits per second (“Mbps”), with a bandwidth of less than 1000 hertz (Hz). These results are 15 times faster than the Zigbee short-range wireless technology mesh networks and 100-400 times faster than Z-wave low-energy wave short-range wireless technology. The current 4Mbps PLC modules will be used for IoT applications involving thousands of sensors. We are developing even higher communication speeds through our PLC. The ultra-narrowband PLC module will be integrated to IC. This division will focus on ultra-narrowband PLC research and development, promote and market ultra-narrowband PLC ICs and finished products.

 

Given that the power grid is an already established ubiquitous network spanning back hundreds of years, connectivity via PLC technology is potentially the most cost-effective and scalable interconnectivity approach and, thus, the ideal backbone communication infrastructure for the IoT industry. However, the harsh electrical noise and interference present on power lines and variations in equipment and standards make data transfer using PLC technology difficult and limits the technology’s applications. Accordingly, the global market for PLC technology is very limited.

 

 

Figure 15. Markets and Markets Updated date – Oct 25

 

 

 

 12 

 

 

The market size is expected to reach $9.5 billion at the end of 2023.7 This prediction is based on current PLC technology, which provides speeds that are too slow (usually less than 9,600 bps), coverage that is too short (200-300 yards) and harsh electrical noise and interference. The major vendors of PLC technology include ABB, General Electric, Siemens, AMETEK, Texas Instruments, Maxim Integrated, Devolo, Cypress Semiconductor, ST Microelectronics, Panasonic, Microchip, Qualcomm Atheros, TP-Link Technologies, NETGEAR, NXP Semiconductor NV, Sigma Designs, Zyxel Communications and Renesas Electronics Corporation.

 

It is our understanding that we are the only vendor currently working on ultra-narrowband PLC technology. With the introduction of our ultra-narrowband PLC technology, which is able to overcome the interference challenges presented by traditional PLC technology, we believe that market size will increase significantly. With the help of our ultra-narrowband technology, which is able to overcome the noise challenge, we believe that the overall market size may increase significantly. Utilizing ultra-narrowband PLC, the global IoT communication infrastructure cost and operating cost can be saved.

 

b)   Ultra-narrowband wireless division

 

This division will focus on developing ultra-narrowband wireless technology and overcoming the challenges faced by current 5G networks, thereby allowing cellular communication development to go beyond the 5G networks.

 

In developing our ultra-narrowband PLC technology, we gained a lot of insight that is being used to develop a single carrier wave ultra-narrow band wireless technology, which aims to increase data transfer rates from 4 Mbps to 64 Mbps. Ideally, our ultra-narrow band wireless technology will be able to achieve data transfer rates of 256 Mbps, which is close 5G speeds, which require 3,276 subcarrier waves. The speed can be further increased if multiple carrier waves or higher operating frequencies are used.

 

Our current research and development efforts only focus on an operating frequency of 64 megahertz (MHz), which is about 100 times lower than 4G networks (6 gigahertz (GHz)) and 5,000 times lower than 5G networks (up to 300 GHz). Our technology’s 1,000 Hz bandwidth is approximately 20,000 times narrower than 4G networks and 100,000 times narrower than 5G networks. The narrower the bandwidth, the less energy consumption. By maintaining the 1,000 Hz band width, our ultra-narrowband wireless technology can save electricity usage by a factor of up to 100,000 times when compared with a 5G networks. We believe that our ultra-narrowband wireless technology has the potential to push the wireless frontier well beyond 5G. We expect to finalize our ultra-narrowband technology with data transfer speeds of 64-256 Mbps during the first of second quarters of 2021.

 

5G infrastructure market is projected by Markets and Markets to reach USD 47,775 million by 2027, at a CAGR of 67.1%. The major players in the 5G infrastructure market are Huawei (China), Ericsson (Sweden), Samsung (South Korea), Nokia Networks (Finland), ZTE (China), NEC (Japan), CISCO (US), CommScope (US), Comba Telecom Systems (Hong Kong), Alpha Networks (Taiwan), Siklu Communication (Israel), and Mavenir (US). Huawei (China) is the leader in the 5G infrastructure market. Limited coverage, high energy consumption and expensive infrastructure installation are the major bottleneck in 5G. All the 5G technologies are based on broadband technology, our research suggests there are very few, if any company working on ultra-narrowband technology and have difficulty finding any literature after 2014. We believe that adopting our ultra-narrowband wireless technology, the 5G higher spectrum bands cost, 5G network hardware cost and 5G energy consumption costs could be saved significantly.

 

c)    User interface machine auto generation division

 

Established in 2009, our company’s software user interface machine auto generation technology division has developed 100 sensors in arbitrary combinations, all of which have been tested for IOS system. RS-485 is the communication standard defining the electrical characteristics of drivers and receivers for use in serial communications systems. The current RS-485 standard modules available on the market do not support more than 100 sensors. The first version of UIMAGP has been completed and is ready for marketing.

 

UIMAGP not  only can be used in IoT software design, but also can be applied to other industry sectors, this division is planning to expand to other industry as well.

 

The software market size is enormous. According   to www.grandviewresearch.com, the market reached $388.98 billion in 2020.

 

 

 

___________________________________

 

7 Market Research Report “Powerline Communication Market by Offering (Hardware, Software, and Services), Frequency (Narrowband, and Broadband), Application (Energy Management and Smart Grid, and Indoor Networking), Vertical, and Geography – Global Forecast to 2023,” available at: https://www.marketsandmarkets.com/Market-Reports/power-line-communication-plc-market-912.html (last accessed February 10, 2021).

 

 

 

 13 

 

 

 

Figure 16. Software market size.

 

Some of the biggest companies within the software industry today include Microsoft, IBM, Oracle, SAP and Salesforce, all boasting billion dollar revenue figures. None of them has developed a UIMAGP. Any software which can be created by low code and no code programming can also be created by using UIMAGP. However, the software created by UIMAGP achieves what low code and no code programming cannot because of the complexities of applying the code to different platforms and the accompanying required customization. One of the distinct features of UIMAGP is that the programming provides a starting point which includes foundational code that may be used on any platform, operating system, etc. This makes the final programming much more efficient, as it only needs relatively few lines of code to program a complicated application.

 

d)    Universal smart instrument division

 

This division will focus on developing and marketing end user universal smart instruments and shared distributed universal IoT devices. The development of universal smart instruments and IoT have a considerable amount of overlap, with the only difference being the number of devices involved. We take this overlap a step further, unify universal smart instruments and IoT into a single system, eliminating any distinction between them. Using USIP which is cost effective and fully production-ready hardware and software platform have a huge advantage in shorting design, build, test and fix cycles. The design cycle improved from a few years to a few weeks. The smart home products including light control, air conditioner control, sprinkler control, garden light control, heating floor control, motorized curtain control, pool filtration and algae control, smoke detector control, carbon monoxide measurement, motion detector, doorbell have been designed and tested. Industrial IoT devices design including industrial light control, temperature control, humidity control, carbon dioxide control, digital lighting control, quantum PAR measurement and control, pH measurement and control, TDS measurement and control, fan speed control has been completed. We anticipate that this division will market and distribute these products during the second quarter of 2021; and start presale marketing during the first quarter of 2021.

 

The instrumentation industry is also very large and difficult to estimate due to the high number of industry sectors. However, the IoT industry sector is only a fraction of the larger market. MarketsandMarkets forecasts the global IoT market size is expected to reach $561 billion by 2022.8 The key market players include Intel Corporation (US), SAP SE (Walldorf, Germany), Cisco Systems, Inc. (US), Microsoft Corporation (US), Oracle Corporation (US), International Business Machine (IBM) Corporation (US), PTC Inc. (US), Google Inc. (US), Hewlett-Packard Enterprise (US), Amazon Web Services Inc. (US), Bosch Software Innovation GmbH (Stuttgart, Germany) and General Electric (US). All of these industry players’ IoT devices are of a traditional machine to machine type and have fundamental challenges in terms of their cost and implementation. Our shared distributed universal IoT devices are much more cost efficient.

 

This division will also focus on development of device-on-a- chip ICs. We will distinguish our DoC technology from the component ICs, these ICs are able to perform entire device functions. According to the “integrated Circuits Global Market Report 2020,” 9 the global integrated circuits market was worth $412.3 billion in 2019. The market is expected to grow at a CAGR of 5.09% and reach a value of $502.94 billion by 2023. Major players in the IC market are Intel Corporation, Texas Instruments, Analog Devices, STMicroelectronics, NXP, ON Semiconductor, Micron, Toshiba, Broadcom and Qualcomm.

 

___________________________

 

8 Id.

9 The Business Research Company, March 2020, “Integrated Circuits Global Market Report 2020,” available at: https://www.thebusinessresearchcompany.com/report/integrated-circuits-global-market-report (last accessed January 24, 2021).

 

 

 

 14 

 

 

Products we are currently selling

 

We are also a wholesaler of various digital, analog, and quantum light meters and filtration products, including fan speed adjusters, carbon filters and HEPA filtration systems. We source these products from manufacturers in China and then sell them to a major U.S. distributor, Hydrofarm, who resells our products directly to consumers through retail distribution channels and in some cases, places its own branding on our products.

 

Specifically, we sell the following products:

 

Fan speed adjuster device. We provide a fan speed adjuster device to our client Hydrofarm. Designed specifically for centrifugal fans with brushless motors, our adjuster device helps ensure longer life by preventing damage to fan motors by adjusting the speed of centrifugal fans without causing the motor to hum. These devices are rated for 350 watts max, have 120VAC voltage capacity and feature an internal, electronic auto-resetting circuit breaker.

 

 

Our Fan Speed Adjuster Device

 

Carbon filter devices. We sell two types of carbon filter devices to our client Hydrofarm. These carbon filter devices are professional grade filters specifically designed and used to filter air in greenhouses that might be polluted by fermenting organics. One of these filters can be attached to a centrifugal fan to scrub the air in a constant circle or can be attached to an exhaust line as a single pass filter, which moves air out of the growing area and filters unwanted odors and removes pollens, dust, and other debris in the air. The other filter is designed to be used with fans from 0-6000 C.F.M.

 

 

 

 15 

 

 

 

Our Carbon Filter Device

 

HEPA filtration device. We provide a high-efficiency particulate arrestance (“HEPA”) filtration device at wholesale prices to our client Hydrofarm. Manufactured, tested, certified, and labeled in accordance with current HEPA filter standards, this device is targeted towards greenhouses and grow rooms and designed to keep insects, bacteria, and mold out of grow rooms. We sell these devices in various sizes.

 

 

Our HEPA Filtration Device

 

 

 

 16 

 

 

Digital light meter. We provide a handheld digital light meter that is used to measure luminance in fc units, or foot-candles.

 

 

Our Digital Light Meter Device

  

Quantum par meter. We provide a handheld quantum par meter used to measure photosynthetically active radiation (“PAR”). This fully portable handheld PAR meter is designed to measure PAR flux in wavelengths ranging from 400 to 700 nm. It is designed to measure up to 10,000 µmol.

 

 

Our Quantum Par Meter Device

 

 

 

 17 

 

 

Strategy behind the AVX Acquisition

 

On March 15, 2019, the Company completed a transaction with Patrick Calderone to purchase 100% of the outstanding stock of AVX, an IoT installation and management company based in southern California.

 

Through our acquisition of AVX, we are planning to offer ordinary families an entire smart home product line at a fraction of the current market price. We have finished the design of smart lighting control, air conditioner, sprinkler, garden light control, garage door control and heating control. We are developing a swimming pool control device, smoke detector and carbon monoxide monitor. We believe these product lines could be completed by the end of 2021.

 

It is our intention to offer a complete line of smart home products, designed by Focus Universal, and marketed and installed by AVX, in the $3,000 range. Where a family would likely choose not to install a $300,000 system in a $150,000 home, even if they could afford to do so, the same family would be more inclined to install a smart home product at the $3,000 price point. We believe smart home installation based on the Ubiquitor will include more functionalities than the current systems offered by our competitors. Our smart home systems would be able to integrate, exchange data, interact and connect utilizing our PLC technology. As a result, the installation process would be simplified, and its costs would be dramatically reduced.

 

Once successfully integrated, the Ubiquitor will be central to every smart home installation that AVX does. The Ubiquitor’s connectivity capabilities will allow for that system to be expanded and customized in the future.

 

We intend to complete the design for the first hardware products, specifically, a surveillance camera and a doorbell, by the end of 2021 and believe we can begin to start installing these new shared distributed smart home products in the next few years. We plan to offer a zero down payment option for the installation of AVX’s smart home systems and charge a monthly subscription fee instead.

 

Notwithstanding the foregoing, should we be unable to successfully integrate the Ubiquitor into AVX’s smart home installations, the Ubiquitor will continue to be a flagship product of our Company that can be applied to a variety of other purposes in the different industries and fields mentioned above.

 

We currently operate in the scientific instruments industry and the smart home installations industry and plan to apply several of our new technologies to the IoT marketplace.

 

Index of Key Technical Abbreviated Terms

 

Abbreviation Full Term
5G Fifth Generation Mobile Wireless Telecommunications Network
FSK Gaussian Frequency Shift Keying
HANs Home Area Networks
IC Integrated Chip
IoT Internet of Things
LTE Networks Long-Term Evolution Networks
MOS Transistor Metal-Oxide-Silicon Transistor
PLC Power Line Communication
UNB Ultra-narrowband
USIO Universal Smart Instrumentation Operating System
USIP Universal Smart Instrumentation Platform

 

 

 

 18 

 

 

Growth Strategy

 

Strategy and Marketing Plan

 

The Company plans to market the USIP to the industrial sector first, including key growth industries such as indoor agriculture. Once the technology is established there, the core technologies of universality and interoperability through a readily available device, such as a mobile device or smartphone, may be ported to products specifically intended for the consumer and residential markets.

 

While industrial markets are large, the consumer and residential markets are even larger. This two-phase approach will allow for continuous and increasing revenue growth. Moreover, during the industrial phase of development, the Company will be able to test and refine its products to ensure that they are ready for the consumer and residential markets.

 

Once we have successfully entered the industrial sector, we intend to roll out additional technologies that are currently under development. These technologies will both advance and support the core technologies marketed in phases one and two to the industrial and consumer markets.

 

We will continue to design, manufacture, market and distribute our electronic measurement devices, such as temperature humidity meters, digital meters, quantum PAR meters, pH meters, TDS meters, and CO2 monitors. Over the years we have developed a broad and loyal customer base. The universal smart technology has been applied to our existing traditional devices and demonstrated significant functionality improvement and hardware cost savings. We believe hardware cost reductions of up to 90% have been achieved. However, promoting universal smart technology and universal smart IoT devices to our customers, including traditional instrument manufacturers, will be the major focus of our business in the future.

 

Different markets require different strategies. We divided our customers into a few segments to determine what specific marketing technique will reach each targeted group and its needs.

 

a) Our Existing Customer, Hydrofarm

 

To minimize the upfront cost of entering a market, we must choose our entry point carefully so as to find one that offers the least possible resistance. It costs more to attract new customers than to retain and increase sales to our existing customer, Hydrofarm. The design, development and manufacture of our universal smart instruments is targeted to increase current sales to our existing customer.

 

Our current customer, Hydrofarm, is the largest distributor in the horticulture industry with roughly 50% of the market share in the U.S. horticulture industry.

 

All our current universal smart devices, including sensors and controllers, will be distributed to Hydrofarm. Smartphones can be used for display and control of all the sensors and controllers in the horticulture industry. By the end of 2020, we completed the development all of the necessary sensors used in the gardening industry, including a light control node, temperature sensor, humidity sensor, digital light sensor, quantum PAR sensor, pH sensor, TDS sensor and carbon dioxide sensor; and we finished all the circuit layouts for the pilot IoT system for the gardening industry (consisting of approximately 1,000 sensor nodes and controllers). We sent these circuit layouts to our manufacturer in China for production. However, due to the coronavirus pandemic, the production was delayed. By the third quarter of 2021 , we intend to market our Ubiquitor device to Hydrofarm, who in turn will resell and market the device to its customers in the horticulture industry.

 

b) Online Customers

 

We intend to use traditional and specialized e-commerce outlets to help with online brand awareness. By analyzing Amazon’s data, we plan to determine which traditional instruments have the highest selling volumes and at what price point. Future research and development will focus on integrating the sensors used in these instruments into the universal smart instruments to leverage on their existing markets.

 

 

 

 19 

 

 

c) Traditional Controller and Remote-Control Customers

 

Traditional controllers monitor and control their sensors through bi-directional communication implemented by hardware. The sensors or probes in controllers not only measure the physical environment but also give feedback to the input actuators that can make necessary corrections. They are expensive and require a corresponding monitor in which unidirectional communication is needed. For example, a traditional temperature meter may cost approximately $15 and a temperature controller may cost approximately $100. The wireless bi-directional communication supported by a smartphone or mobile device offers cost reduction in controller design and manufacturing. Traditional remote control is accomplished through hardware, which can be replaced by a smartphone. Universal smart technology will also play an important role in traditional control applications. Traditional controller users are one of highest profit margin customers of universal smart technology.

 

d) Special Customers

 

For customers who consider an instrument’s compatibility, interoperability, interchangeability, universality, upgradeability, expandability, scalability, and remote access ability as crucial, universal smart technology has several fundamental advantages over traditional instruments in terms of hardware cost and functionality. End users will not only enjoy the remote access to their sensors wirelessly but also save the cost of the hardware module which will be replaced by a smartphone.

 

e) Traditional Instruments Manufacturers

 

We may consider selling the Ubiquitor directly to instrument manufacturers and allowing them to distribute it through their established platforms.

 

We are putting together an internal sales team in order to establish the marketing campaign for our sensor devices, including the Ubiquitor. We are also expanding the sales team for AVX because we believe that the Ubiquitor device will be integral to smart home installations.

 

We believe that universal smart technology will play a critical role for traditional industrial instrument manufacturers, because it is too expensive and difficult to develop industrial instrument sensors for medium or smaller companies or individual homes. The cost factor is the first consideration when deciding whether a company wants to develop universal smart technologies and implement them in their products.

 

Our goals over the next three years include:

 

  · Raise capital to move into full manufacturing and production for our Ubiquitor device;

 

  · Partner with manufacturers and promote the adoption of our Ubiquitor device in a USIP;

 

  · Acquire a stable market share of the sensor device market;

 

  · Continue performing research and development on PLC technology;

 

  · Focus on building our smart home offerings so that we can reduce the cost of smart home implementation to focus on expanding smart home installation and implementation beyond luxury homes;

 

  · File additional patents to expand our intellectual property portfolio related to the many uses of our Ubiquitor device; and

 

  · File patents to protect our PLC technology.

 

 

 

 20 

 

 

In order to achieve these goals, we intend to focus on the following initiatives:

 

  · Position the Ubiquitor device as the industry standard in universal sensor reading technology;

 

  · Establish strategic supply chain channels to facilitate efficient production operations; and

 

  · Communicate the product and service differentiation through direct networking and effective marketing.

 

Growth Strategy

 

Growth through Mergers and Acquisitions

 

Mergers and acquisitions (“M&A”) represent a significant part of our growth strategy because M&A can fill business gaps or add key business operations without requiring us to wait years for marketing and sales cycles to materialize. We have used this growth strategy in our acquisition of AVX, and in the future intend to continue to use M&A to find and secure opportunities that will either: (i) achieve the objective of growth in our market segments; or (ii) provide an area of expansion that will add to the Company’s products and/or service lines in markets that we are currently not serving but could serve if we had the appropriate expertise. The resulting combination of our existing products and services, new key personnel, and strategic partnerships through M&A will allow us to operate in new markets and provide new offerings to our existing market.

 

Acquiring key competitors may allow the addition of key personnel to our team. These additions may include people with vast industry knowledge, which can act as a catalyst to further our growth and lead to the development of new products and business lines. We will seek to target synergistic acquisitions in the same industry, targeting different geographic locations, which will allow us to actively compete on a regional or national scale in the IoT segment. If we target businesses in the same sector or location we hope to combine resources to reduce costs, eliminate duplicate facilities or departments and increase revenue. We believe this strategy will allow for accelerated growth and maximize investor returns.

 

One of our key strategies to grow by acquisition is to acquire smaller businesses that focus on IoT installation technology (industrial or residential) and in the USIP or PLC industries.

 

Original Equipment Manufacturer (“OEM”) Engineering Consulting and Design Services

 

Universal smart technology is new to most electronic engineers and manufacturers. One way to promote our universal smart technology is to provide direct OEM engineering design consulting services to potential industrial customers. Direct, on-site consulting will educate our industrial consumers on the many ways our technology can be implemented in a variety of industrial applications. We believe that we are well positioned to perform product design and perform engineering consulting services for future OEM customers. We believe we can operate as a seamless extension of our customers’ engineering organizations and add scale, flexibility and speed to their design processes. We will not be able to offer such engineering consulting and design consulting services until the Ubiquitor is being produced and distributed. We believe that once the Ubiquitor is being produced and distributed, we will have hired and trained enough engineers to execute our consulting strategy. Due to the timeline for the roll out of the Ubiquitor, we believe that the earliest we would feasibly be able to implement such consulting services would be the fourth quarter of 2021. Through our engineering consulting services strategy, we intend to become our customers’ engineering partner at all stages of the design cycle so that we may effectively assist them in transforming ideas into production-ready products and accelerate time to market for our universal smart technology product segment.

 

Technology Licensing

 

We may also consider entering into licensing arrangements with our customers for our technology. We believe that once we educate our industrial consumers, they may want to integrate our universal smart technology into their own technology through licensing agreements. We believe licensing our intellectual property may provide a revenue stream with no additional overhead, all while allowing us to retain proprietary ownership and creating long-term industrial consumers who rely on our products. By creating incentives, such as cost incentives, to license our IP rather than design their own technology, we believe potential customers could save on design costs and create business development opportunities. Licensing may also allow us to rely on the expertise, capacity and skill of a licensee to commercialize our IP, which is especially valuable if we lack the infrastructure, financial resources and know-how to bring a product to market independently. We believe that licensing will not occur until the last quarter of 2021 due to the fact that we will need to have a team of our consulting engineers in place once we complete the offering and working with industrial consumers on product integration, as well as time to negotiate the terms of licensing agreements with potential customers.

 

 

 

 21 

 

 

Distribution Method

 

We intend to engage in relationships predominantly with standard U.S. component manufacturers and similar electronics providers for the manufacturing of unassembled parts of the Ubiquitor and its sensor nodes, to then ship such parts to our Ontario, California facility where we will assemble the Ubiquitor devices and sensor nodes. Afterwards, we would distribute our Ubiquitor devices to distributors and retailers directly and also ship directly to traditional industrial instrument manufacturers. We have a sales department operating out of our Ontario, California office and eventually plan to open a second sales department in China dedicated to promoting our technologies to local instrument manufacturers who can utilize our Ubiquitor devices in their manufacturing and other processes. We intend to market the Ubiquitor to industrial end-users through Hydrofarm, through direct business-to-business sales channels and also directly to consumers via e-commerce internet platforms. For our quantum light meters, and air filtration products, we rely solely on Hydrofarm to distribute to end-users through its distribution channels.

 

Raw Materials

 

The electronic components used in the Ubiquitor are common and can be easily purchased through a variety of suppliers with little advance notice. We predominantly use large-scale manufacturers in the United States such as Texas Instruments and Intel for the major components. Other key suppliers we could consider include Analog Devices, Skyworks Solutions, Infineon, STMicroelectronics, NXP Semiconductors, Maxim Integrated, On Semiconductor, and Microchip Technology. Production and assembly lines are also available worldwide if we needed to outsource or increase our capacity, though we intend to complete our assembly in our Ontario, California facility. On October 1, 2018, we entered into an agreement with Beijing Hengnar Technology Development Co., Ltd. to develop certain infrared online gas analyzer products that detect O2, CO, CO2, H2, Nox, SF6 and other gases for our digital light meter and filtration business segment.

 

Manufacturing and Assembly

 

We have an assembly facility in Ontario, California where we assemble the Ubiquitor from parts sourced predominantly in the United States. Our quantum light meters and handheld sensors are also manufactured in our Ontario, California facility. Our air filtration products are manufactured and assembled in China by a third-party contract manufacturer, Tianjin Guanglee.

 

Competitors

 

Sensor Node Industry

 

There are several competitors we have identified in the sensor node industry, including traditional instruments or devices manufacturers such as Hanna Instruments or Extech Instruments.

 

Hach developed and launched the SC1000 Multi-parameter Universal Controller, a probe module for connecting up to 32 digital sensors or analyzers. However, their products are not compatible with smart phones yet; and we believe their price point is still prohibitive to consumers.

 

Monnit Corporation offers a range of wireless and remote sensors. Many of Monnit’s products are web-based wireless sensors that usually are not portable because of their power consumption. Also, the sensors’ real-time updates are slow; and we believe security of the web-based sensor data acquisition may be a concern. In addition to purchasing the device, consumers usually have to pay a monthly fee for using web-based services.

 

 

 

 22 

 

 

IoT Installation Industry

 

There are several companies that compete with AVX in smart home installations, including Vivint Smart Home, Crestron   and Control4. However, we believe we can distinguish ourselves from our competitors by offering a substantially lower price. An installation by Crestron ranges between $100,000 and $500,000 and by Control4 between $20,000 and $40,000. The cheapest competitor we can identify in this sector is Vivint Smart Home, which costs less than $5,000 to install; however, we understand that the Vivint Smart Home focuses on security systems only and that users have no other smart applications, which our smart home product line would include.

 

Air Filtration Systems and Meter Products Industry

 

The air filtration system and meter products industry is a niche industry. The global industrial air filtration market was valued at $11.6 billion in 2018 and analysts expect it to register a CAGR of 6.7% from 2019 to 2025 because of the industrial need to control air quality across a range of industries.10 Air purification methods are an effective way to control contaminants and improve indoor air quality and as a result, many national and local governments overseeing indoor air quality and other emissions are enacting stricter workforce health and safety regulations in this area, which drives demand. One of our competitors, Donaldson Company, Inc., an air filtration company, announced in its SEC filings that on October 18, 2018 it acquired BOFA International LTD (“BOFA”), headquartered in the United Kingdom, for $98.2 million less cash acquired of $2.2 million. BOFA manufactures systems across a wide range of air filtration applications.

 

We are not trying to compete with traditional instruments or device manufacturers because we plan to utilize our Ubiquitor device in conjunction with our smartphone application. We believe the resulting product may compete in a much wider product category due to its many potential applications.

 

Our Corporate History

 

The Company entered the residential and commercial automation installation service industry through the acquisition of AVX Design and Integration, Inc. (“AVX”) in March of 2019. AVX was established in 2000 with the goal of installing high-performance, easy-to-use Audio/Video, Home Theater, Lighting Control, Automation and Integration systems for high-net-worth residential projects.

 

Additionally, we are performing research and development on an electric power line communication technology and have filed three patents with the USPTO related to our Ubiquitor device and the design of a quantum PAR photo sensor. Eventually, we hope that PLC will further enhance smart IoT installations performed by AVX and powered by the Ubiquitor.

 

We are based in the City of Ontario, California, and were incorporated in Nevada in 2012. In December of 2013, we filed an S-1 registration statement that went effective on March 14, 2014. Since then, our securities have been trading on the OTCQB Market.

 

Our website is www.focusuniversal.com. Our website and the information contained therein or connected thereto are not intended to be incorporated into this prospectus.

 

On October 21, 2015, Dr. Jennifer Gu and Dr. Edward Lee were appointed as directors of the Company. After such appointments, the Board of Directors consisted of Dr. Desheng Wang, Dr. Jennifer Gu and Dr. Edward Lee.

 

On April 2, 2018, Duncan Lee was appointed as the Chief Financial Officer of the Company.

 

On June 8, 2018, we announced the appointment of four new board members of the Company, the majority of whom were independent: Sheri Lofgren, Sean Warren, Michael Pope, and Carine Clark. Our Board of Directors formed our Audit, Compensation, and Nominating Committees.

  

_______________________________

 

10 Grand View Research. (2020, February). Industrial Air Filtration Market Size, Share & Trends Analysis Report, by Product, by End Use (Cement, Food, Metals, Power, Pharmaceutical, Agriculture, Paper & Pulp and Woodworking, Plastic), by Regionk and Segment Forecasts, 2020-2027. Retrieved at: https://www.grandviewresearch.com/industry-analysis/industrial-air-filtration-market. 

 

 

 

 23 

 

 

On July 26, 2018, our Board of Directors approved our submission of an application in compliance with the NASDAQ rules and regulations to list and trade our Company’s securities on the NASDAQ Capital Market. As of the date of this prospectus, our application is pending NASDAQ’s approval and our Company’s securities are not listed on the NASDAQ Capital Market.

 

On November 28, 2018, Sean Warren resigned as a member of the Board of Directors; and Greg Butterfield was appointed in his place. On December 1, 2018, Mr. Warren became a part-time consultant to the Company.

 

In late 2018, we purchased a manufacturing warehouse and office space addressed at 2311 E. Locust Court, Ontario, CA, 91761. The property consists of an industrial type, two-story building, with a total building area of 30,740 square feet. Ten thousand square feet will be utilized for office space; and 20,000 square feet will be utilized for warehouse space. The property includes 58 parking spaces. The purchase price for the property was approximately $4.62 million.

 

On March 15, 2019, the Company entered into a stock purchase agreement with Patrick Calderone, the CEO and owner of AVX, whereby the Company purchased 100% of the outstanding stock of AVX (the “AVX Acquisition”) for $890,716. The purchase price was structured as follows: (1) $550,000 payable in cash at closing; (2) $290,716 payable in 39,286 shares of the Company’s common stock issued upon closing; and (3) $50,000 payable in the form of a secured promissory note at 6% interest over 12 months secured by six shares of AVX common stock. In connection with the AVX Acquisition, Patrick Calderone also entered into a consulting agreement with the Company pursuant to which he would offer consulting and training services during the 12-month period following the closing of the AVX Acquisition. Since AVX is an installer of smart home products, and since we anticipate that our Ubiquitor device is capable of enhancing smart home installations, we believe that this acquisition will allow us to test new applications and the integration capabilities of our Ubiquitor device in smart homes.

 

On November 15, 2019, Dr. Edward Lee resigned as President and was appointed to be the Chairman of the Board of Directors.

 

Patent, Trademark, License and Franchise Restrictions and Contractual Obligations and Concessions

 

On November 4, 2016, we filed a U.S. patent application number 15/344,041 with the USPTO. On March 5, 2018, we issued a press release announcing that the USPTO had issued an Issue Notification for U.S. Patent Application No. 9924295 entitled “Universal Smart Device,” which covers a patent application regarding the Company’s Universal Smart Device. The patent was granted on March 20, 2018.

 

Subsequent to our internal research and development efforts, we filed with the USPTO on June 2, 2017 a patent application regarding a process for improving the spectral response curve of a photo sensor. The small and cost-effective multicolor sensor and its related software protected by the potential patent we believe could achieve a spectral response that approximates an ideal photo response to measure optical measurement. The patent was issued on February 26, 2019.

 

In addition, we have been awarded a notice of allowance for a patent from the USPTO for a patent application we filed on March 12, 2018 as application No. 15/925,400. The patent title is a “Universal Smart Device,” which is a universal smart instrument that unifies heterogeneous measurement probes into a single device that can analyze, publish, and share the data analyzed. The issue fee was paid on March 14, 2019.

 

Research and Development Activities

 

As of December 31, 2020, we spent a total of $256,636 on research and development activities.

 

Compliance with Environmental Laws

 

We are not aware of any environmental laws that have been enacted, nor are we aware of any such laws being contemplated for the future, that impact issues specific to our business.

 

 

 

 24 

 

 

Employees

 

As of the date of this prospectus we have twenty-one full-time employees and one part-time employee. The Company’s Chief Executive Officer and Secretary is Dr. Desheng Wang, and our Chief Financial Officer is Duncan Lee. Our officers and directors are responsible for planning, developing and operational duties, and will continue to be so throughout the early stages of our growth. Three full-time employees are working in the warehouse orchestrating the development and distribution of our sensor devices as well as our filters.

 

Legal Proceedings

 

On April 13, 2020, Ian Patterson resigned from his position as Chief Operations Officer of AVX. On May 5, 2020, Mr. Patterson filed an action in the Superior Court for the County of Los Angeles, State of California, against the Company et al. We believe neither the Company nor Dr. Wang has been served properly and venue is improper. The complaint alleges claims including wrongful termination, retaliation and various other provisions of the California Labor Code, and various other claims under California state law. The complaint seeks unspecified economic and non-economic losses, as well as attorneys’ fees. The Company is investigating and intends to vigorously defend itself in the foregoing matter. However, litigation and investigations are inherently uncertain. Accordingly, the Company cannot predict the outcome of this matter.

 

On April 13, 2020, AVX terminated an employee from her position as Sales and Marketing Director. On May 13, 2020, she filed an action in the Superior Court for the County of Los Angeles, State of California. The Complaint alleges claims including wrongful termination, retaliation and various other provisions of the California Labor Code, and various other claims under California state law. The complaint seeks unspecified economic and non-economic losses, as well as attorneys’ fees. The Company is investigating and intends to vigorously defend itself in the foregoing matters. However, litigation and investigations are inherently uncertain, but the outcome could have a material impact on the Company.

 

Reports to Securities Holders

 

We provide an annual report that includes audited financial information to our shareholders. We make our financial information equally available to any interested parties or investors through compliance with the disclosure rules for a small business issuer under the Exchange Act. We are subject to disclosure filing requirements including filing Form 10-K annually and Form 10-Q quarterly. In addition, we will file Form 8-K and other proxy and information statements from time to time as required. We do not intend to voluntarily file the above reports in the event that our obligation to file such reports is suspended under the Exchange Act. The public may read and copy any materials that we file with the Securities and Exchange Commission at the SEC’s Public Reference Room at 100 F Street NE, Washington, DC 20549.

 

The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site (http://www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC.

 

Item 1A. RISK FACTORS

 

We have a limited operating history and a history of operating losses, and we may not be able to sustain profitability. In addition, we may be unable to continue as a going concern.

 

We were incorporated on December 4, 2012, and as of December 31, 2020, we had an accumulated deficit of $9,704,575. We have a limited operating history upon which an evaluation of our future success or failure can be made. Additionally, if we are not successful in growing revenues and controlling costs, we will not maintain profitable operations or positive cash flow, and even if we achieve profitability in the future, we may not be able to sustain profitability in subsequent periods. Absent a significant increase in revenue or additional equity or debt financing, we may not be able to sustain our ability to continue as a going concern.

 

 

 

 25 

 

 

Because we have a limiting operating history with positive revenues, you may not be able to accurately evaluate our operations.

 

We were incorporated on December 4, 2012 and have had limited operations to date. Therefore, we have a limited operating history upon which to evaluate the merits of investing in our company. The likelihood of success must be considered in light of the problems, expenses, difficulties, complications and delays encountered in connection with the operations that we plan to undertake. These potential problems include, but are not limited to, unanticipated problems relating to the ability to generate sufficient cash flow to operate our business, and additional costs and expenses that may exceed current estimates. However, we expect to continue generating revenues. Additionally, we recognize that if the effectiveness of our business plan is not forthcoming, we will not be able to continue business operations. If we are unsuccessful in addressing these risks, our business will most likely fail.

 

We require significant funding to develop, manufacture and market our Ubiquitor wireless sensor.

 

We may ultimately require up to $20 million to fund the development, manufacturing, assembly and marketing strategy for our product. Once we achieve this fund-raising goal, we intend to position ourselves in the small device market, establishing the price at below a few hundred dollars. Due to superior functionality and low price, we expect to capture this section of the market fairly easily. Once our product and service matures, and the Company becomes better known, we believe we could gain market share in the high-end market. None of this will be possible if we fail to obtain the funding we require. There is no guarantee that additional funding can be obtained on favorable terms, if at all.

 

We depend on key personnel.

 

Our future success will depend in part on the continued service of key personnel, particularly, Desheng Wang, our Chief Executive Officer, and the Chairman of our Board, Edward Lee.

 

If any of our directors and officers choose to leave the company, we will face significant difficulties in attracting potential candidates for replacement of our key personnel due to our limited financial resources and operating history. In addition, the loss of any key employees or the inability to attract or retain qualified personnel could delay our plan of operations and harm our ability to provide services to our current customer, Hydrofarm, and harm the market’s perception of us.

 

Regulatory actions could limit our ability to market and sell our products.

 

Many of our products and the industries in which they are used are subject to U.S. and foreign regulation. Government regulatory action could greatly reduce the market for our Ubiquitor device and for smart home installation. For example, the power line medium, which is the communications medium that could be used by some of our products, is subject to special regulations in North America, Europe and Japan. In general, these regulations limit the ability of companies such as ours to use power lines as a communication medium. In addition, some of our competitors have attempted or may attempt to use regulatory actions to reduce the market opportunity for our products or to increase the market opportunity for their own products.

 

We outsource our product manufacturing and are susceptible to problems in connection with procurement, decreasing quality, reliability and protectability.

 

We assemble our Ubiquitor devices by using fully manufactured parts, the manufacturing of which has been fully outsourced. We have no direct control over the manufacturing processes of our products. This lack of control may increase quality or reliability risks and could limit our ability to quickly increase or decrease production rates.

 

Our business operations and financial performance may be affected by the coronavirus pandemic.

 

The coronavirus pandemic has adversely affected economies throughout the world. With the continued spread of the coronavirus in the United States and other countries, it is unclear how economic activity and workflows might be impacted on a worldwide basis. Many employers in the United States are requiring their employees to work from home or not come into their office. If the pandemic continues and conditions worsen, we may experience a disruption in our supply chain as well as a decline in sales activities and customer orders. The impact of the coronavirus on our operations is uncertain at this time. Given the rapidly changing situation related to this pandemic, we believe it could have a material adverse effect on our business, financial conditions and results of operations.

 

 

 

 26 

 

 

We outsource the manufacturing of key elements of our quantum light meters and air filters to a single manufacturing partner, with whom we do not have a formal contractual relationship.

 

We outsource the manufacture of our quantum light meter and air filtration devices to a single contract manufacturer, Tianjin Guanglee Technologies Ltd. (“Tianjin Guanglee”). If Tianjin Guanglee’s operations are interrupted or if Tianjin Guanglee is unable to meet our delivery requirements due to capacity limitations or other constraints, we may be limited in our ability to fulfill new customer orders, and we may be required to seek new manufacturing partners in the future. Tianjin Guanglee has limited manufacturing capacity, is itself dependent upon third-party suppliers and is dependent on trained technical labor to effectively create components making up our devices or to repair special tooling. In addition, as of the date of this prospectus, we do not have a formal development and manufacturing agreement that regulates our business relationship with Tianjin Guanglee. Although we continue to operate under the terms of an oral agreement, and we believe there are a multitude of manufacturers that could quickly replace Tianjin Guanglee, our manufacturing operations could be adversely impacted if we are unable to enforce Tianjin Guanglee’s performance.

 

Our potential inability to adequately protect our intellectual property during the outsource manufacturing of our filtration products in China could negatively impact our performance.

 

In connection with our manufacturing outsourcing arrangements, we rely on third-party manufacturers to implement customary manufacturer safeguards onsite, such as the use of confidentiality agreements with employees, to protect our proprietary information and technologies during the manufacturing process. However, these safeguards may not effectively prevent unauthorized use of such information and technical knowhow or prevent the manufacturers from retaining them. We face risks that our proprietary information may not be afforded the same protection in China as it is in countries with more comprehensive intellectual property laws, and local laws may not provide an adequate remedy in the event of unauthorized disclosure of confidential information. Costly and time-consuming litigation could be necessary to enforce and determine the scope of our proprietary rights in China, and failure to obtain or maintain intellectual property or trade secret protection could adversely affect our competitive business position. In the event that the third-party manufacturers of our proprietary products misappropriate our intellectual property, our business, prospects and financial condition could be materially and adversely affected.

 

The size and future growth in the market for our Ubiquitor device or our PLC technology under development has not been established with precision and may be smaller than we estimate, possibly materially. If our estimates and projections overestimate the size of this market, our sales growth may be adversely affected.

 

Our estimates of the size and future growth in the market for our Ubiquitor device or our PLC technology under development is based on a number of internal studies, reports and estimates. In addition, our internal estimates are based in large part on current feedback from clients using current generation technology and our belief is that the use and implementation in the United States and worldwide will be extensive. While we believe we are using effective tools in estimating the total market for Ubiquitor device or our PLC technology, these estimates may not be correct and the conditions supporting our estimates may change at any time, thereby reducing the predictive accuracy of these underlying factors. The actual demand for our products or competitive products, could differ materially from our projections if our assumptions are incorrect. As a result, our estimates of the size and future growth in the market for Ubiquitor device or our power line communication technology may prove to be incorrect. If the demand is smaller than we have estimated, it may impair our projected sales growth and have an adverse impact on our business.

 

If we are unable to properly forecast future demand of our products, our production levels may not meet demands, which could negatively impact our operating results.

 

Our ability to manage our inventory levels to meet our customer's demand for our products is important for our business. Our production levels and inventory management are based on demand estimates six to twelve months forward taking into account supply lead times, production capacity, timing of shipments, and dealer inventory levels. If we overestimate or underestimate demand for any of our products during a given season, we may not maintain appropriate inventory levels, which could negatively impact our net sales or working capital, hinder our ability to meet customer demand, or cause us to incur excess and obsolete inventory charges.

 

 

 

 27 

 

 

Demand for our Ubiquitor product may be affected by new entrants who copy our products and/or infringe on our intellectual property.

 

The ability to protect and enforce intellectual property rights varies across jurisdictions. An inability to preserve our intellectual property rights may adversely affect our financial performance. Competitors and others may also initiate litigation to challenge the validity of our intellectual property or allege that we infringe their intellectual property. We may be required to pay substantial damages if it is determined our products infringe on their intellectual property. We may also be required to develop an alternative, non-infringing product that could be costly and time-consuming, or acquire a license on terms that are not favorable to us. Protecting or defending against such claims could significantly increase our costs, divert management’s time and attention away from other business matters, and otherwise adversely affect our results of operations and financial condition.

 

Internal system or service failures, including as a result of cyber or other security incidents, could disrupt business operations, result in the loss of critical and confidential information, and adversely impact our reputation, our business, financial condition, results of operations and cash flows. Our connected products potentially expose our business to cybersecurity threats.

 

The Ubiquitor is a connected product and potentially exposes our business to cybersecurity threats. As a result, we could be subject to systems, service or product failures, natural disasters, power shortages or terrorist attacks, but also from exposure to cyber or other security threats. Global cybersecurity threats and incidents can range from uncoordinated individual attempts to gain unauthorized access to our systems to sophisticated and targeted measures known as advanced persistent threats directed at our products, our customers and/or our third-party service providers, including cloud providers. There has been an increase in the frequency and sophistication of cyber and other security threats we face, and our customers are increasingly requiring cyber and other security protections and standards in our products, and we may incur additional costs to comply with such demands.

 

The potential consequences of a material cyber or other security incident include financial loss, reputational damage, negative media coverage, litigation with third parties, which in turn could adversely affect our competitiveness, business, financial condition, results of operations and cash flows.

 

Our sensor segment is subject to risks associated with operations that have a concentration of customers.

 

We only have one customer, Hydrofarm, who resells our digital light meters and sensors. There is no guarantee that this customer will remain solvent, and/or continue with the Company as it has in the past. Consequently, if we were to lose this customer, a material portion of our revenues in our sensor and digital light meter segment would be lost.

 

Our air filtration business segment could experience price fluctuations in raw materials, availability problems, and volatile demand.

 

The principal raw materials that we use are filter media, activated carbon, perforated metal sheet, and certain other petroleum-based products, like plastics, rubber, and adhesives. Our cost of filter media can experience price fluctuations. Larger competitors can enter into selective supply arrangements with major suppliers that reduce medium-to-long-term volatility in costs. We cannot guarantee purchases in the volume that justifies such selective supply arrangements. Thus, we could be subject to price volatility.

 

Prices and availability for the electronic parts and plastics we need to assemble the Ubiquitor could fluctuate.

 

The principal raw materials that we use for our Ubiquitor device are standard industrial electronics parts and plastics that are generally easily available through a variety of U.S. domestic and foreign manufacturers. Such raw materials can experience price fluctuations due to a variety of factors, such as tariffs, import/export fees and delays, and availability. If there is scarcity, then larger competitors could be given purchasing priority with major suppliers that could make it so smaller companies like us experience volatility in costs and/or availability issues. Also, since we have not yet manufactured in large numbers, our management team might not have the expertise to mitigate such price fluctuations or availability concerns. Thus, suppliers could stop selling to us because of demand. Even though it is possible to find alternative suppliers, changing to new suppliers could delay production and affect the quality of certain products.

 

 

 

 28 

 

 

Changes in tariffs, import or export restrictions, Chinese regulations or other trade barriers may reduce gross margins.

 

We currently source products from manufacturers in China, including digital, analog, and quantum light meters, filtration products and certain components for our Ubiquitor device. Currently, the prices we offer to Hydrofarm are FOB (Free on Board) China. Only the cost of delivering the goods to the nearest port is included and Hydrofarm is responsible for the shipping from China and responsible for all other fees, including tariffs, associated with delivering the goods to the ultimate destination. If Hydrofarm changes the term to CIF (Cost, Insurance, and Freight) United States, then we would be responsible for the shipping costs and the tariff costs, which may reduce our gross margin. Thus, we may incur increases in costs due to changes in tariffs, import or export restrictions, other trade barriers, or unexpected changes in regulatory requirements, any of which could reduce our gross margins. Moreover, volatile economic conditions may impact the ability of our suppliers to make timely deliveries; and in the event that a supplier fails to make a delivery, there is no guarantee that we will be able to timely locate an alternative supplier of comparable quality at an acceptable price.

 

Since the beginning of 2018, there has been increasing rhetoric, in some cases coupled with legislative or executive action, from several U.S. and foreign leaders regarding tariffs against foreign imports of certain materials. It is difficult to anticipate the impact on our business caused by the proposed tariffs or whether the proposed changes in tariffs will materialize in the future. Given the relatively fluid regulatory environment in China and the United States, there could be additional tax, tariffs or other regulatory changes in the future. Any such changes could directly and materially adversely impact our business, financial condition, and operating results.

 

Our failure to respond to rapid change in the technology markets could cause us to lose revenue and harm our competitive position.

 

Our future success will depend significantly on our ability to develop and market new products that keep pace with technological developments and evolving industry standards for technology. We are currently developing products, including our Ubiquitor device, universal smart monitors and controllers, distributed shared universal smart home products, and smart products for the gardening industry, for MacOS, PC, as well as mobile operating systems such as Android and iOS, that transmit data over Wi-Fi signals, cellular signals, Bluetooth, certain power line systems, traditional wired systems, and other radio frequency systems that enable data transmission. Our delay or failure to develop or acquire technological improvements, adapt our products to technological changes or provide technology that appeals to our customers may cause us to lose customers and may prevent us from generating revenue which could ultimately cause us to cease operations.

 

Our business depends on our ability to keep manufacturing costs low; and we may lack the expertise necessary to negotiate and maintain favorable pricing, supply, business and credit terms with our potential vendors.

 

It may be difficult to negotiate or maintain favorable pricing, supply, business or credit terms with our potential vendors, suppliers and service providers. In addition, product manufacturing costs may increase if we fail to achieve anticipated volumes. There can be no assurance that we will be able to successfully manage these risks. In summary, we can offer no assurance that we will be able to obtain a sufficient (but not excess) supply of products on a timely and cost-effective basis. Our failure to do so would lead to a material adverse impact on our business.

 

Since wireless networks are susceptible to interference and other limitations, and one advantage of our Ubiquitor device is that it can connect to wireless networks as one way to transmit data, wireless network limitations may reduce the competitive advantage of the Ubiquitor in the marketplace.

 

Our Ubiquitor relies on both wired and wireless networks to transmit data, which is a major advantage of the Ubiquitor device. Wireless networks allow multiple users to access large amounts of information without the hassle of running wires to and from each IoT device. However, wireless networks have technological limitations and there are a number of disadvantages that our Ubiquitor device may face when using a wireless network. Wireless networks are typically expensive; it can cost up to four times more to set up a wireless network than to set up a wired network. The range of a wireless network is limited, and a typical wireless router will only allow individuals located within 150 to 300 feet to access the network. Wireless networks are extremely susceptible to interference from radio signals, radiation and other similar types of interference. Such interference may cause a wireless network to malfunction. Wireless networks can be accessed by any IoT device within range of the network’s signal so information transmitted through the network (including encrypted information) may be intercepted by unauthorized users. Wireless networks are typically slower than wired networks, sometimes even up to 10 times slower. Walls and floors can seriously limit the range of your wireless network. Since wireless networks have severe limitations, these limitations may reduce the competitive advantage that the Ubiquitor provides in the marketplace which might prevent widespread adoption.

 

 

 

 29 

 

 

Demand for our products is uncertain and depends on our currently unproven ability to create and maintain superior performance.

 

Our future operating results will depend upon our ability to provide our products or services and to operate profitably in an industry characterized by intense competition, rapid technological advances and low margins. This, in turn, will depend on a number of factors, including:

 

  · Our ability to generate significant sales and profit margin from the Ubiquitor device;

 

  · Worldwide market conditions and demand for sensor devices and other products we may continue to add as we move forward;

 

  · Our success in meeting targeted availability dates for our products and services;

 

  · Our ability to develop and commercialize new intellectual property and to protect existing intellectual property;

 

  · Our ability to maintain profitable relationships with our distributors, retailers and other resellers;

 

  · Our ability to maintain an appropriate cost structure;

 

  · Our ability to attract and retain competent, motivated employees;

 

  · Our ability to comply with applicable legal requirements throughout the world; and

 

  · Our ability to successfully manage litigation, including enforcing our rights, protecting our interests and defending claims made against us.

 

These factors are difficult to manage, satisfy and influence and we cannot provide any assurance that we will be able to generate significant demand for and sales of our products.

 

The Ubiquitor device could fail to gain traction in the marketplace for a number of reasons that would adversely impact our financial results and cause our investors to lose money.

 

Future rollout of the Ubiquitor entail numerous risks such as:

 

  · Any lack of market acceptance of the Ubiquitor;

 

  · Failure to maintain acceptable arrangements with product suppliers, particularly in light of lower than anticipated volumes;

 

  · Manufacturing, technical, supplier, or quality-related delays, issues or concerns, including the loss of any key supplier or failure of any key supplier to deliver high quality products on time;

 

  · Competition;

 

  · Potential declines in demand for sensor devices; and

 

  · Risks that third parties may assert intellectual property claims against our products.

 

 

 

 30 

 

 

In order to compete successfully, we must accurately forecast demand, closely monitor inventory levels, secure quality products, continuously drive down costs, meet aggressive product price and performance targets, create market demand for our brand and hold sufficient, but not excess, inventory.

 

Our Ubiquitor device greatly depends on the growth and adoption of the IoT market, and other next-generation internet and smartphone-based applications.

 

The Internet may ultimately prove not to be a viable commercial marketplace for IoT applications for a number of reasons, including:

 

  · unwillingness of consumers to shift to and use other such next-generation Internet-based, smartphone-assisted applications;

 

  · refusal to purchase our products and services;

 

  · perception by end-users with respect to the quality of our wireless sensors in an industry historically dominated by wired sensors;

 

  · competition;

 

  · inadequate development of smartphone infrastructure to keep pace with increased levels of use; and

 

  · increased government regulations in a relatively unregulated marketplace.

 

There is a risk that the market will not adapt to using the smartphone readout as a substitute platform for sensor devices, causing our products to fail in the marketplace.

 

There is a risk that the market will not receive the smartphone technology, which we currently as our sole platform. The vast majority of products on the small sensor device market do not currently use smartphones to collect and analyze sensor data. There is no guarantee that using smartphone technology will cut production costs and be well received. If our platform using smartphone technology is not well received, there is a risk that device manufacturers will develop new monitoring and operating components that are incompatible with our current platform instead of developing the traditional sensors that are compatible with our technology. Updating our platform to stay compatible with new components could increase our costs unexpectedly.

 

Using wireless transmission technologies such as Wi-Fi and Bluetooth may create security risks.

 

There is also a risk of failure based on the wireless transmission of data used by our smartphone platform. If there is instability in a wireless network, Bluetooth sensor, or other network problems that are out of our control, our new platform may not be well received. Our smartphone platform relies on the wireless transmission of data through Wi-Fi networks and Bluetooth sensors. These networks are often deemed less secure than a hard-wired network. The security of a wireless network is often out of our control. However, any breach of security could result in the market and sensor device manufacturers to fail to embrace our platform.

 

Our business involves the use, transmission and storage of confidential information, and the failure to properly safeguard such information could result in significant reputational harm.

 

We may at times collect, store and transmit information of, or on behalf of, our clients that may include certain types of confidential information that may be considered personal or sensitive, and that are subject to laws that apply to data breaches. We believe that we take reasonable steps to protect the security, integrity and confidentiality of the information we collect and store, but there is no guarantee that inadvertent or unauthorized disclosure will not occur or that third parties will not gain unauthorized access to this information despite our efforts to protect this information, including through a cyber-attack that circumvents existing security measures and compromises the data that we store. If such unauthorized disclosure or access does occur, we may be required to notify persons whose information was disclosed or accessed. Most states have enacted data breach notification laws and, in addition to federal laws that apply to certain types of information, such as financial information, federal legislation has been proposed that would establish broader federal obligations with respect to data breaches. We may also be subject to claims of breach of contract for such unauthorized disclosure or access, investigation and penalties by regulatory authorities and potential claims by persons whose information was disclosed. The unauthorized disclosure of information, or a cyber-security incident involving data that we store, may result in the termination of one or more of our commercial relationships or a reduction in client confidence and usage of our services. We may also be subject to litigation alleging the improper use, transmission or storage of confidential information, which could damage our reputation among our current and potential clients and cause us to lose business and revenue.

 

 

 

 31 

 

 

Product liability associated with the production, marketing and sale of our products, and/or the expense of defending against claims of product liability, could materially deplete our assets and generate negative publicity which could impair our reputation.

 

The production, marketing and sale of digital products have inherent risks of liability in the event of product failure or claim of harm caused by product operation. Furthermore, even meritless claims of product liability may be costly to defend against. We do not currently have product liability insurance for our products. We may not be able to obtain this insurance on acceptable terms or at all. Because we may not be able to obtain insurance that provides us with adequate protection against all or even some potential product liability claims, a successful claim against us could materially deplete our assets. Moreover, even if we are able to obtain adequate insurance, any claim against us could generate negative publicity, which could impair our reputation and adversely affect the demand for our products, our ability to generate sales and our profitability. For the products we sell through Hydrofarm, we also do not carry product liability insurance. It is our management’s position that these handheld battery-operated products do not carry substantial product liability risk and to the extent there are any product liability risks, such risks are born by Hydrofarm, who does carry product liability insurance coverage for the products we provide to them and they sell to their customers. However, it is possible that we could face liability in a products liability lawsuit for manufacturing defects or defective design since we design or manufacture the products sold by Hydrofarm.

 

Some of the agreements that we may enter into with manufacturers or distributors of our products and components of our products may require us:

 

  · to obtain product liability insurance; or

 

  · to indemnify manufacturers against liabilities resulting from the sale of our products.

 

If we are not able to obtain and maintain adequate product liability insurance, then we could be in breach of these agreements, which could materially adversely affect our ability to produce our products and generate revenues. Even if we are able to obtain and maintain product liability insurance, if a successful claim in excess of our insurance coverage is made, then we may have to indemnify some or all of our manufacturers or distributors for their losses, which could materially deplete our assets.

 

We may not be able to identify suitable acquisition targets or otherwise successfully implement a growth strategy reliant on mergers and acquisitions.

 

In order to expand our business, we hope to pursue mergers and acquisitions to acquire new or complementary businesses, services or technologies. We expect to continue evaluating potential strategic acquisitions of businesses, services and technologies. However, we may not be able to identify suitable candidates, negotiate appropriate or favorable acquisition terms, obtain financing that may be needed to consummate such transactions or complete proposed acquisitions. Any such future mergers and acquisitions would be accompanied by the risks commonly encountered in acquisitions of companies, including, among other things, the difficulty of integrating the operations and personnel of the acquired companies; the potential disruption of the Company’s ongoing business; the inability of management to incorporate successfully acquired technology and rights into the Company’s services and product offerings; additional expense associated with amortization of acquired intangible assets; the maintenance of uniform standards, controls, procedures and policies; and the potential impairment of relationships with employees, customers and strategic partners.

 

Our growth strategy includes licensing our intellectual property, and we run the risk that a licensee could become a competitor.

 

As part of our growth strategy, we anticipate licensing our intellectual property. Licensing our intellectual property could potentially damage our business if a licensee becomes a competitor, especially once the statutory rights to our intellectual property have expired or the licensing arrangement with a licensee has terminated. A licensee could develop modifications of our intellectual property and choose to compete with us in the marketplace. Litigation may be necessary to protect our rights to our intellectual property. Even if we are successful, litigation could result in substantial costs and be a distraction to our management team. If we are not successful, we could lose valuable intellectual property rights.

 

 

 

 32 

 

 

Product defects could result in costly fixes, litigation and damages.

 

Our business exposes us to potential product liability risks that are inherent in the design, manufacture and sale of our products. If there are claims related to defective products (under warranty or otherwise), particularly in a product recall situation, we could be faced with significant expenses in replacing or repairing the product. For example, our filtration products or Ubiquitor devices obtain raw materials, machined parts and other product components from suppliers who provide certifications of quality which we rely on. Should these product components be defective and pass undetected into finished products, or should a finished product contain a defect, we could incur significant costs for repairs, re-work and/or removal and replacement of the defective product. In addition, if a dispute over product claims cannot be settled, arbitration or litigation may result, requiring us to incur attorneys’ fees and exposing us to the potential of damage awards against us.

 

Only two officers have public company experience on our management team which could adversely impact our ability to comply with the reporting requirements of U.S. securities laws.

 

Amongst our officers, only Dr. Wang, our CEO, and Duncan Lee, our CFO, have public company experience. Our CEO and CFO are ultimately responsible for complying with federal securities laws and making required disclosures on a timely basis. Any such deficiencies, weaknesses or lack of compliance could have a materially adverse effect on our ability to comply with the reporting requirements of the Securities Exchange Act of 1934, as amended, which is necessary to maintain our public company status. If we were to fail to fulfill those obligations, our ability to continue as a U.S. public company would be in jeopardy in which event you could lose your entire investment in our Company.

 

Some of our officers, directors, consultants and advisors are involved in other businesses and not obligated to commit their time and attention exclusively to our business and therefore they may encounter conflicts of interest with respect to the allocation of time and business opportunities between our operations and those of other businesses.

 

Another example of a conflict of interest is so called “self-dealing” transactions. If a conflict-of-interest transaction is negotiated and approved, in a manner that approximates arms-length negotiations, the transaction is accepted unless a shareholder proves in court that the transaction is not entirely fair to the company or its shareholders. The burden is on the shareholder to show lack of entire fairness. A self-dealing transaction is considered invalid if challenged, unless the interested director proves in court that the transaction is entirely fair to the company. The burden is on the director to show entire fairness.

 

If, as a result of before mentioned conflicts, we are deprived of business opportunities or information, the execution of our business plan and our ability to effectively compete in the marketplace may be adversely affected. If our audit committee becomes aware of such conflict of interests, we will take an immediate action to resolve it. Each conflict of interest will be handled by the Company based on the nature of the conflict and the individual involved in it.

 

We are not aware of any current or potential conflict of interests with our consultants or advisors.

 

We have concluded that we have not maintained effective internal control over financial reporting through the years ended December 31, 2020 and December 31, 2019. Significant deficiencies and material weaknesses in our internal control could have material adverse effects on us.

 

It is important for us to maintain effective internal control over financial reporting, which is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

 

 

 33 

 

 

A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the Company’s annual or interim financial statements will not be prevented or detected on a timely basis.

 

A material weakness in our internal control over financial reporting could adversely impact our ability to provide timely and accurate financial information. If we are unsuccessful in implementing or following our remediation plan, we may not be able to timely or accurately report our financial condition, results of operations or cash flows or maintain effective disclosure controls and procedures. If we are unable to report financial information timely and accurately or to maintain effective disclosure controls and procedures, we could be subject to, among other things, regulatory or enforcement actions by the SEC, any one of which could adversely affect our business prospects.

 

We currently have identified significant deficiencies in our internal control over financial reporting that, if not corrected, could result in material misstatements of our financial statements.

 

In connection with the audit of our financial statements as of and for the years ended December 31, 2020 and 2019, we identified significant deficiencies in our internal control over financial reporting and a general understanding of U.S. GAAP. As such, there is a reasonable possibility that a misstatement of our financial statements will not be prevented or detected on a timely basis.

 

As we have thus far not needed to comply with Section 404 of the Sarbanes-Oxley Act of 2002, as amended (the “Sarbanes Oxley Act” or “SOX”), neither we nor our independent registered public accounting firm has performed an evaluation of our internal control over financial reporting in accordance with Section 404 of the Sarbanes-Oxley Act. In light of the deficiency, we believe that it is possible that certain control deficiencies may have been identified if such an evaluation had been performed.

 

We are working to remediate the deficiencies or material weaknesses. We have taken steps to enhance our internal control environment and plan to take additional steps to remediate the material weaknesses. Specifically:

 

  · We have hired additional outside consultants and will hire qualified personnel in our accounting department, especially to add an experienced accountant in a controller capacity. We will continue to evaluate the structure of the finance organization and add resources as needed;

 

  · we are implementing additional internal reporting procedures, including those designed to add depth to our review processes and improve our segregation of duties;

 

  · we are updating our systems so that we may collect the necessary information to enable us to more effectively monitor and comply with applicable filing requirements on a timely basis;

 

  · we are in the process of documenting, assessing and testing our internal control over financial reporting as part of our efforts to comply with Section 404 of the Sarbanes-Oxley Act.

 

Although we plan to complete this remediation process as quickly as possible, we are unable, at this time to estimate how long it will take, and our efforts may not be successful in remediating the deficiencies or material weaknesses.

 

 

 

 34 

 

 

Our executive officers and directors collectively have the power to control our management and operations and have a significant majority in voting power on all matters submitted to the stockholders of the Company.

 

Our CEO and one of our directors, Dr. Desheng Wang, owns 35.14% of the outstanding shares of our common stock as of the date of this prospectus and after a fully subscribed offering will own 33.27%. Two of our directors together own over 50% of the outstanding shares of our common stock and after a fully subscribed offering will still own over 50% of the outstanding shares of our common stock. Accordingly, Directors have a significant influence in determining the outcome of all corporate transactions or other matters, including mergers, consolidations and the sale of all or substantially all of our assets. They also have the power to prevent or cause a change in control. The interests of our directors may differ from the interests of the other stockholders and thus result in corporate decisions that are disadvantageous to other shareholders.

 

Management currently beneficially owns a majority of our outstanding common stock. Consequently, management has the ability to influence control of the operations of the Company and, acting together, will have the ability to influence or control substantially all matters submitted to stockholders for approval, including:

 

  · Election of our board of directors;

 

  · Removal of directors;

 

  · Amendment to the Company’s Articles of Incorporation or Bylaws; and

 

  · Adoption of measures that could delay or prevent a change in control or impede a merger, takeover or other business combination.

 

These stockholders have complete control over our affairs. Accordingly, this concentration of ownership by itself may have the effect of impeding a merger, consolidation, takeover or other business consolidation, or discouraging a potential acquirer from making a tender offer for the common stock.

 

If we fail to maintain an effective system of internal control over financial reporting, we may not be able to accurately report our financial results. As a result, current and potential shareholders could lose confidence in our financial reporting, which would harm our business and the trading price of our stock.

 

Members of our Board of Directors are inexperienced with U.S. GAAP and the related internal control procedures required of U.S. public companies. Management has determined that our internal audit function is also significantly deficient due to insufficient qualified resources to perform internal audit functions.

 

We are a smaller reporting company with limited resources. Therefore, we cannot assure investors that we will be able to maintain effective internal controls over financial reporting based on criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in Internal Control-Integrated Framework. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the company’s annual or interim financial statements will not be prevented or detected on a timely basis. The Company has deficiencies over financial statements recording in areas of recording revenue and expenses in proper cut off as well as proper classification of accounts. For these reasons, we are considering the costs and benefits associated with improving and documenting our disclosure controls and procedures and internal controls and procedures, which includes (i) hiring additional personnel with sufficient U.S. GAAP experience and (ii) implementing ongoing training in U.S. GAAP requirements for our CFO and accounting and other finance personnel. If the result of these efforts are not successful, or if material weaknesses are identified in our internal control over financial reporting, our management will be unable to report favorably as to the effectiveness of our internal control over financial reporting and/or our disclosure controls and procedures, and we could be required to further implement expensive and time-consuming remedial measures and potentially lose investor confidence in the accuracy and completeness of our financial reports which could have an adverse effect on our stock price and potentially subject us to litigation.

 

 

 

 35 

 

 

The requirements of being a public company may strain our resources and distract our management.

 

We are required to comply with various regulatory and reporting requirements, including those required by the Securities and Exchange Commission. Complying with these reporting and other regulatory requirements is time-consuming and may result in increased costs to us and could have a negative effect on our business, results of operations and financial condition.

 

As a public company, we are subject to the reporting requirements of the Securities Exchange Act of 1934, as amended, or the Exchange Act, and requirements of the Sarbanes-Oxley Act of 2002, as amended, or SOX. These requirements may place a strain on our systems and resources. The Exchange Act requires that we file annual, quarterly and current reports with respect to our business and financial condition. The SOX requires that we maintain effective disclosure controls and procedures and internal controls over financial reporting. Compliance with these rules and regulations will increase our legal and financial compliance costs, make some activities more difficult, time-consuming or costly and increase demand on our systems and resources.

 

These activities may divert management’s attention from other business concerns, which could have a material adverse effect on our business and results of operations.

 

In addition, changing laws, regulations and standards relating to corporate governance and public disclosure are creating uncertainty for public companies, increasing legal and financial compliance costs and making some activities more time consuming. These laws, regulations and standards are subject to varying interpretations, in many cases due to their lack of specificity, and, as a result, their application in practice may evolve over time as new guidance is provided by regulatory and governing bodies. This could result in continuing uncertainty regarding compliance matters and higher costs necessitated by ongoing revisions to disclosure and governance practices. We intend to invest resources to comply with evolving laws, regulations and standards, and this investment may result in increased general and administrative expenses and a diversion of management’s time and attention from revenue-generating activities to compliance activities. If our efforts to comply with new laws, regulations and standards differ from the activities intended by regulatory or governing bodies due to ambiguities related to practice, regulatory authorities may initiate legal proceedings against us and our business may be harmed.

 

We also expect that being a public company and these new rules and regulations will make it more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced coverage or incur substantially higher costs to obtain coverage. These factors could also make it more difficult for us to attract and retain qualified members of our Board of Directors, particularly to serve on our audit committee and compensation committee, and qualified executive officers.

 

Risks Related to the Ownership of our Common Stock

 

There is a very limited public (trading) market for our common stock and; therefore, our investors may not be able to sell their shares and the price of our common stock may fluctuate substantially.

 

Our common stock is listed on the over-the-counter exchange, and is thinly traded. As a result, stockholders may be unable to liquidate their investments, or may encounter considerable delay in selling shares of our common stock. If an active trading market does develop, the market price of our common stock is likely to be highly volatile due to, among other things, the nature of our business and because we are a thinly-traded public company. Further, a few individual stockholders dominate our shares. The limited trading volume subjects the price of our common stock to manipulation by one or more stockholders and will significantly limit the number of shares that one can purchase or sell in a short period of time. The market price of our common stock may also fluctuate significantly in response to the following factors, most of which are beyond our control:

 

  · variations in our quarterly and annual operating results;

 

  · changes in general economic conditions;

 

  · changes in technologies favored by consumers;

 

  · price competition or pricing changes by us or our competitors; and

 

  · the addition or loss of key managerial and collaborative personnel.

 

 

 

 36 

 

 

The equity markets have, on occasion, experienced significant price and volume fluctuations that have affected the market prices for many companies’ securities and that have often been unrelated to the operating performance of these companies. Any such fluctuations may adversely affect the market price of our common stock, regardless of our actual operating performance. As a result, stockholders may be unable to sell their shares, or may be forced to sell them at a loss.

 

To date, there has been a limited public market for shares of our common stock, with limited trading. An active public trading market may not develop or, if developed, may not be sustained. The current market price of our common stock and any possible subsequent listing on another larger securities exchange, if and when we are successful in doing so, will be affected by a number of factors, including those discussed above.

 

An increase of free trading shares of our common stock could result in substantial sales of common stock on the open market which could cause our stock price to fall substantially.

 

In 2018, we registered 19,904,706 shares of our common stock for more than 300 shareholders, which is substantially more than the 15,718,309 shares of common stock that are currently free trading. Any increase in freely trading shares, or the perception that such shares will or could come onto the market could have an adverse effect on the trading price of the stock. No prediction can be made as to the effect, if any, that sales of these shares, or the availability of such shares for sale, will have on the market prices prevailing from time to time. Nevertheless, the possibility that substantial amounts of common stock may be sold in the public market may adversely affect prevailing market prices for our common stock and could impair our ability to raise capital through the sale of our equity securities or impair our shareholders’ ability to sell on the open market.

 

You could be diluted from our future issuance of capital stock and derivative securities.

 

As of February 12, 2021, we had 40,959,741 shares of common stock outstanding and no shares of preferred stock outstanding. We are authorized to issue up to 75,000,000 shares of common stock and no shares of preferred stock. To the extent of such authorization, our Board of Directors will have the ability, without seeking stockholder approval, to issue additional shares of common stock or preferred stock in the future for such consideration as the Board of Directors may consider sufficient. The issuance of additional common stock or preferred stock in the future may reduce an investor’s or potential investor’s proportionate ownership and voting power.

 

Substantial future sales of our common stock, or the perception in the public markets that these sales may occur, may depress our stock price.

 

Sales of substantial shares of our common stock in the public market, or the perception that these sales could occur, could adversely affect the price of our common stock and could impair our ability to raise capital through the sale of additional shares.

 

In the future, we may issue our securities if we need to raise capital in connection with a capital raise or acquisitions. The number of shares of our common stock issued in connection with a capital raise or acquisition could constitute a material portion of our then-outstanding shares of our common stock and have a dilutive effect on our shareholders which could have a material negative effect on our stock price.

 

Future sales of our common stock by existing stockholders could cause our stock price to decline.

 

If our existing stockholders sell substantial shares of our common stock in the public market, then the market price of our common stock could decrease significantly. The perception in the public market that our stockholders might sell shares of common stock also could depress the market price of our common stock. There are approximately 40,959,741 shares of our common stock outstanding, of which approximately 15,718,309 shares are currently freely tradable.

 

 

 

 37 

 

 

Certain existing holders of a majority of our common stock have rights, subject to certain conditions, to require us to file registration statements covering their shares or to include their shares in registration statements that we may file for ourselves or other shareholders. If the sale of these shares are registered, they will be freely tradable without restriction under the Securities Act. In the event such registration rights are exercised and a large number of shares of common stock are sold in the public market, such sales could reduce the trading price of our common stock.

 

A decline in the price of shares of our common stock might impede our ability to raise capital through the issuance of additional shares of our common stock or other equity securities.

 

We do not intend to pay dividends and there will be less ways in which you can make a gain on any investment in Focus Universal Inc.

 

We have never paid any cash dividends and currently do not intend to pay any dividends for the foreseeable future. To the extent that we require additional funding currently not provided for in our financing plan, our funding sources may likely prohibit the payment of a dividend. Because we do not intend to declare dividends, any gain on an investment in Focus Universal Inc. will need to come through appreciation of the stock’s price.

 

There has been a limited trading market for our common stock to date and it may continue to be the case even once our common stock is listed on NASDAQ.

 

There has been limited trading volume in our common stock, which is currently quoted on the OTCQB and traded under the symbol “FCUV.” Once our shares of common stock are listed on NASDAQ, there may still be a limited trading market for our common stock. A lack of an active market may impair the ability of our stockholders to sell shares at the time they wish to sell or at a price that they consider favorable. The lack of an active market may also reduce the fair market value of our common stock, impair our ability to raise capital by selling shares of capital stock and may impair our ability to use common stock as consideration to attract and retain talent or engage in business transactions (including mergers and acquisitions).

 

Once our shares of common stock are listed on NASDAQ, we may not be able to maintain the continued listing standards.

 

NASDAQ requires companies to fulfill specific requirements in order for their shares to continue to be listed. There is no guarantee that our common stock will maintain NASDAQ continued listing standards and we may be delisted. If our common stock is delisted from NASDAQ, our shareholders could find it difficult to sell their common stock.

 

In the event that the shares of our common stock were to be delisted from NASDAQ, we expect that it would be traded on the OTCQB or OTCQX, which are unorganized, inter-dealer, over-the-counter markets that provide significantly less liquidity than NASDAQ or other national securities exchanges. Thus, a delisting from NASDAQ may have a material adverse effect on the trading and price of our common stock.

 

If we are unable to maintain compliance with NASDAQ continued listing standards, including maintenance of at least $2.5 million of stockholders’ equity and maintenance of a $1.00 minimum bid price, our common stock may be delisted from NASDAQ.

 

There can be no assurances that we will be able to maintain our NASDAQ listing in the future. In the event we are unable to maintain compliance with NASDAQ continued listing standards and our common stock is delisted from NASDAQ, it could likely lead to a number of negative implications, including an adverse effect on the price of our common stock, reduced liquidity in our common stock, the loss of federal preemption of state securities laws and greater difficulty in obtaining financing. In the event of a delisting, we would take actions to restore our compliance with NASDAQ’s continued listing standards, but we can provide no assurance that any such action taken by us would allow our common stock to become listed again, stabilize the market price or improve the liquidity of our common stock, prevent our common stock from dropping below the NASDAQ minimum bid price requirement or prevent future non-compliance with NASDAQ’s continued listing requirements.

 

 

 

 38 

 

 

Focus Universal is an “emerging growth company” under the Jumpstart Our Business Startups Act. We cannot be certain if the reduced reporting requirements applicable to emerging growth companies will make our shares of common stock less attractive to investors.

 

Focus Universal is and will remain an “emerging growth company” until the earliest to occur of (a) the last day of the fiscal year during which its total annual revenues equal or exceed $1 billion (subject to adjustment for inflation), (b) the last day of the fiscal year following the fifth anniversary of its initial public offering, (c) the date on which Focus Universal has, during the previous three-year period, issued more than $1 billion in non-convertible debt securities, or (d) the date on which Focus Universal is deemed a “large accelerated filer” (with at least $700 million in public float) under the Exchange Act.”).

 

For so long as Focus Universal remains an “emerging growth company” as defined in the JOBS Act, it may take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies” as described in further detail in the risk factors below. Focus Universal cannot predict if investors will find its shares of common stock less attractive because Focus Universal will rely on some or all of these exemptions. If some investors find Focus Universal’s shares of common stock less attractive as a result, there may be a less active trading market for its shares of common stock and its stock price may be more volatile.

 

If Focus Universal avails itself of certain exemptions from various reporting requirements, its reduced disclosure may make it more difficult for investors and securities analysts to evaluate Focus Universal and may result in less investor confidence.

 

The JOBS Act is intended to reduce the regulatory burden on “emerging growth companies”. Focus Universal meets the definition of an “emerging growth company” and so long as it qualifies as an “emerging growth company,” it will not be required to:

 

  · have an auditor report on our internal controls over financial reporting pursuant to Section 404(b) of the Sarbanes-Oxley Act;

 

  · comply with any requirement that may be adopted by the Public Company Accounting Oversight Board regarding mandatory audit firm rotation or a supplement to the auditor’s report providing additional information about the audit and the financial statements (i.e., an auditor discussion and analysis);

 

  · submit certain executive compensation matters to shareholder advisory votes, such as “say-on-pay” and “say-on-frequency;” and

 

  · disclose certain executive compensation related items such as the correlation between executive compensation and performance and comparisons of the CEO’s compensation to median employee compensation.

 

In addition, Section 107 of the JOBS Act also provides that an “emerging growth company” can take advantage of the extended transition period provided in Section 7(a)(2)(B) of the Securities Act for complying with new or revised accounting standards. In other words, an “emerging growth company” can delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. However, Focus Universal is choosing to “opt out” of such extended transition period, and as a result, Focus Universal will comply with new or revised accounting standards on the relevant dates on which adoption of such standards is required for non-emerging growth companies. Section 107 of the JOBS Act provides that its decision to opt out of the extended transition period for complying with new or revised accounting standards is irrevocable.

 

Notwithstanding the above, we are also currently a “smaller reporting company”, meaning that we are not an investment company, an asset-backed issuer, or a majority-owned subsidiary of a parent company that is not a smaller reporting company and have a public float of less than $250 million or annual revenues of less than $100 million during the most recently completed fiscal year.

 

 

 

 39 

 

 

However, similar to “emerging growth companies,” “smaller reporting companies” are able to provide simplified executive compensation disclosures in their filings; are exempt from the provisions of Section 404(b) of the Sarbanes-Oxley Act requiring that independent registered public accounting firms provide an attestation report on the effectiveness of internal control over financial reporting; are not required to conduct say-on-pay and frequency votes until annual meetings occurring on or after January 21, 2013; and have certain other decreased disclosure obligations in their SEC filings, including, among other things, only being required to provide two years of audited financial statements in annual reports. Decreased disclosures in our SEC filings due to our status as an “emerging growth company” or “smaller reporting company” may make it harder for investors to analyze the Company’s results of operations and financial prospects.

 

Our management will have broad discretion as to the use of proceeds from this offering, and we may not use the proceeds effectively.

 

Our management will have broad discretion in the application of the net proceeds from this offering and could spend the proceeds in ways that do not improve our results of operations or enhance the value of our common stock. You will not have the opportunity, as part of your investment decision, to assess whether these proceeds are being used appropriately. Our failure to apply these funds effectively could have a material adverse effect on our business and cause the price of our common stock to decline.

 

Risks Related to Our Acquisition of AVX

 

If we are unable to manage our anticipated post-acquisition growth effectively, our business could be adversely affected.

 

We anticipate that as a result of the significant expansion of our operations and addition of operating subsidiaries, new personnel may be required in all areas of our operations in order to continue to implement our post-acquisition business plan. Our future operating results depend to a large extent on our ability to manage this expansion and growth successfully. For us to continue to manage such growth, we must put in place legal and accounting systems and implement human resource management and other tools. We have taken preliminary steps to put this structure in place. However, there is no assurance that we will be able to successfully manage this anticipated rapid growth. A failure to manage our growth effectively could materially and adversely affect our profitability.

 

Increasing competition within our industry could have an impact on our business prospects.

 

The IoT market is a growing industry where new competitors are entering the market frequently. These competing companies may have significantly greater financial and other resources than we have and may have been developing their products and services longer than we have been developing ours. Although our portfolio of products and related revenue stream sources are broad, increasing competition may have a negative impact on our profit margins.

 

The success of our smart home installation business will depend upon the efforts of management of our subsidiary AVX.

 

Although key personnel have remained with AVX following the business combination, we can offer no assurance that we will be able to retain them or effectively recruit new additional personnel. The departure of any key members of AVX’s management team could make it more difficult to operate AVX. Moreover, to the extent that we will rely upon their management team to operate AVX, we will be subject to risks regarding their managerial competence. Accordingly, we cannot assure you that our assessment of these individuals will prove to be correct and that they will have the skills, abilities and qualifications we expect.

 

If we are unable to integrate the Ubiquitor device into the smart home installation business, we may not be able to distinguish ourselves in the segment and it could negatively affect our ability to operate in the competitive smart home installation industry.

 

The smart home installation business is a highly competitive market, and we have numerous competitors who are already well-established in the market. We expect our competitors to continue improving the design and performance of their products and to introduce new products that could be competitive in both price and performance. The reason we believe that we could become competitive in this market segment is because we anticipate integrating the Ubiquitor device into AVX’s smart home installations. However, there is no guarantee that we can integrate the Ubiquitor device into AVX’s smart home installations. If we are unable to integrate the Ubiquitor device into smart home installations, we will not be able to achieve the competitive price and performance we anticipate to achieve success in AVX’s future smart home installations. Alternatively, we may not be able to achieve a smart home installation at a cost-effective price that is sufficient to distinguish us from amongst the competition in this market segment.

 

 

 

 40 

 

 

Risks related to the COVID-19 pandemic.

 

The recent COVID-19 pandemic may adversely affect our business, results of operations, financial condition, liquidity, and cash flow.

 

The outbreak of COVID-19 originating in Wuhan, China, sometime around December 2019, has since rapidly increased its exposure globally. On March 11, 2020, the World Health Organization declared the outbreak a pandemic. The pandemic has impacted and may further impact the United States and the broader economies of affected countries, including negatively impacting economic growth, the proper functioning of financial and capital markets, foreign currency exchange rates and interest rates. Due to the speed with which the situation is developing, the global breadth of its spread and the range of governmental and community reactions thereto, there is uncertainty around its duration, ultimate impact and the timing of recovery. Therefore, the pandemic could lead to an extended disruption of economic activity and the impact on our consolidated results of operations, financial position, and cash flows could be material.

 

As a result of the adverse impact that the COVID-19 pandemic is having on our economy and the economies of the countries in which we plan to do business, the pandemic may affect our operations, including our supply chain distribution systems, production levels and research and development activities. In addition, any preventive or protective actions that governments implement or that we adopt in response to the COVID-19 pandemic, such as travel restrictions, quarantines, and limited operations of governmental agencies, may interfere with the ability of our employees, vendors, and suppliers to perform their respective responsibilities and obligations relative to the conduct of our business. Additionally, government regulations that have been imposed in response to the COVID-19 pandemic may cause delays our freight processes, which would result in higher shipping costs. In addition, social distancing guidelines could have an adverse impact on our research and development activities as our laboratories are not operating at full capacity.

 

The impact of the COVID-19 pandemic on the global financial markets may reduce our ability to access capital, which could negatively impact our short-term and long-term liquidity. Further, the resulting global economic downturn has negatively impacted the ability of certain of our customers to make payments on a timely basis, adversely impacting our cash flows from operations. We do not yet know the full extent of the impact of the COVID-19 pandemic or its resulting economic impact, which could have a material adverse effect on our liquidity, capital resources, operations, and business.

 

We are also monitoring the impact of COVID-19 on our talent recruitment and retention efforts. If members of our management and other key personnel in critical functions across our organization are unable to perform their duties or have limited availability due to COVID-19, we may not be able to execute on our business strategy and/or our operations may be negatively impacted. The loss or limited availability of the services of one or more of our executive officers or other key personnel, or our inability to recruit and retain qualified executive officers or other key personnel in the future could, at least temporarily, have a material adverse effect on our business, financial condition, and results of operations. Qualified individuals are in high demand, and we may incur significant costs to attract them, particularly at the executive level. We may face difficulty in attracting and retaining key talent for a number of reasons, including delays in the recruiting and hiring process as a result of the COVID-19 pandemic.

 

Our business, financial condition, and results of operations could be materially adversely affected by unfavorable results in future employment litigation matters as a result of COVID-19. Our employees may sue us due to possible exposure to COVID-19 while working at one of our facilities or sites. In addition, employees may challenge decisions to implement protective measures such as contact tracing on the basis of local privacy laws due to the increased collection of employee medical information. Litigation matters, regardless of their merits or their ultimate outcomes, are costly, divert management’s attention and may materially adversely affect our reputation and demand for our products. We cannot predict with certainty the eventual outcome of litigation matters. An adverse outcome of litigation or legal matters could result in us being responsible for paying significant damages.

 

Any of these negative effects resulting from litigation matters could materially adversely affect our business, financial condition or results of operations. To the extent the COVID-19 pandemic adversely affects our business and financial results, it may also have the effect of heightening many of the other risks described in this Annual Report on Form 10-K.  

 

The extent to which COVID-19 impacts our results will depend on future developments, which are highly uncertain and cannot be predicted, including new information which may emerge concerning the severity of COVID-19 and the actions taken to contain it or treat its impact.

  

 

 

 41 

 

 

Item 1B. UNRESOLVED STAFF COMMENTS

 

None.

  

Item 2. PROPERTIES

 

In September 2018, we purchased a manufacturing warehouse and office space addressed at 2311 E. Locust St, Ontario, CA, 91761. The property consists of an industrial type, two-story building, with a total building area of 30,740 square feet. 10,000 square feet will be utilized for office space; and 20,000 square feet for warehouse space. The property includes 58 parking spaces. The purchase price for the property was approximately $4.52 million dollars.

 

Item 3. LEGAL PROCEEDINGS

 

On April 13, 2020, Ian Patterson resigned from his position as Chief Operations Officer of AVX. On May 5, 2020, Mr. Patterson filed an action in the Superior Court for the County of Los Angeles, State of California, against the Company et al. We believe neither the Company nor Dr. Wang has been served properly and venue is improper. The complaint alleges claims including wrongful termination, retaliation and various other provisions of the California Labor Code, and various other claims under California state law. The complaint seeks unspecified economic and non-economic losses, as well as attorneys’ fees. The Company is investigating and intends to vigorously defend itself in the foregoing matter. However, litigation and investigations are inherently uncertain. Accordingly, the Company cannot predict the outcome of this matter.

 

On April 13, 2020, AVX terminated an employee from her position as Sales and Marketing Director. On May 13, 2020, she filed an action in the Superior Court for the County of Los Angeles, State of California. The Complaint alleges claims including wrongful termination, retaliation and various other provisions of the California Labor Code, and various other claims under California state law. The complaint seeks unspecified economic and non-economic losses, as well as attorneys’ fees. The Company is investigating and intends to vigorously defend itself in the foregoing matters. However, litigation and investigations are inherently uncertain but the outcome could have a material impact on the Company.

 

Item 4. MINE SAFETY DISCLOSURES

 

Not applicable to our Company.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 42 

 

 

PART II

 

Item 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

 

Market Information

 

On September 23, 2014, our common stock was verified for trading on OTCQB under the trading symbol FCUV. Prior to that time, there was no public market for our stock. The following table sets forth for the indicated periods the high and low intra-day sales price per share for our common stock on the OTCQB for the four quarters of 2019 and for the four quarters of 2020.

 

   High   Low 
         
2019: First Quarter  $7.40   $7.40 
2019: Second Quarter  $7.40   $5.29 
2019: Third Quarter  $12.25   $5.00 
2019: Fourth Quarter  $5.00   $5.00 
           
2020: First Quarter  $5.00   $2.50 
2020: Second Quarter  $4.50   $3.67 
2020: Third Quarter  $3.60   $3.50 
2020: Fourth Quarter  $3.50   $2.00 

 

Holders.

 

As of March 23, 2020, there were 397 record holders (including our directors) of 40,959,741 shares of the Company’s common stock. At December 31, 2020, there were 397   record holders (including our directors) of 40,959,741 shares of the Company’s common stock.

 

Dividends.

 

The Company has not paid any cash dividends to date and does not anticipate or contemplate paying dividends in the foreseeable future. It is the present intention of management to utilize all available funds for the development of the Company’s business.

 

Securities Authorized for Issuance Under Equity Compensation Plans

 

The Company has authorized the issuance of up to 10,000,000 shares of its common stock for issuance under the 2018 Focus Universal Inc. Stock Option Plan.

 

Recent sales of unregistered securities.

 

None.

 

 

 

 43 

 

 

Issuer Purchases of Equity Securities

 

We did not repurchase any of our equity securities during the year ended December 31, 2020, 2019, 2018, 2017  , the nine months ended December 31, 2016, the year ended March 31, 2016, 2015, 2014 or the period from December 4, 2012 (inception) to March 31, 2013.  

  

Item 6. SELECTED FINANCIAL DATA

 

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

 

Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

The following discussion should be read in conjunction with our audited financial statements and notes thereto included herein. In connection with, and because we desire to take advantage of, the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, we caution readers regarding certain forward-looking statements in the following discussion and elsewhere in this report and in any other statement made by, or on our behalf, whether or not in future filings with the Securities and Exchange Commission. Forward-looking statements are statements not based on historical information and which relate to future operations, strategies, financial results or other developments. Forward-looking statements are necessarily based upon estimates and assumptions that are inherently subject to significant business, economic and competitive uncertainties and contingencies, many of which are beyond our control and many of which, with respect to future business decisions, are subject to change. These uncertainties and contingencies can affect actual results and could cause actual results to differ materially from those expressed in any forward-looking statements made by, or our behalf. We disclaim any obligation to update forward-looking statements.

 

Narrative Description of the Business

 

Focus Universal Inc. (the “Company,” “we,” “us,” or “our”) is a Nevada corporation. We have developed four fundamental disruptive proprietary technologies which we believe solve the most fundamental problems plaguing the internet of things (“IoT”) industry through: (1) increasing overall chip integration by shifting it to the device level; (2) creating a faster 5G cellular technology by using Ultra-narrowband technology; (3) leveraging ultra-narrowband power line communication (“PLC”) technology; and (4) User Interface Machine auto generation technology. Our Universal smart technology is designed to overcome instrumentation interoperability and interchangeability. The electronic design starts from a 90% completed common foundation we call our universal smart instrumentation platform (“USIP”), instead of the current method of building each stand-alone instrument from scratch. Our method eliminates redundant hardware and software and results in significant cost savings and production efficiency. We have developed software machine auto generation technology to replace the manual software designs which are currently in use and cannot satisfy the exponential growth of future IoT industry demand. Our ultra-narrowband PLC enables our users to send data over existing electricity power cables and immediately establish a ubiquitous data network without substantial new investment for a dedicated wiring infrastructure. Our ultra-narrow band technology is capable of overcoming the noise problems communicating through power lines that have hindered our competitors for over a century. Our wireless communication technology allows for longer-range coverage, is more energy effective and has much faster data sending speeds than the current 5G technology speeds being used. We also provide sensor devices and are a wholesaler of various air filters and digital, analog, and quantum light meter systems.

 

For the years ended December 31, 2020 and 2019, we generated significant amount of our revenue from sales of a broad selection of agricultural sensors and measurement equipment which is currently our primary business.

 

 

 

 44 

 

 

Our Current Products Include:

 

Products we are currently selling

 

We are also a wholesaler of various digital, analog, and quantum light meters and filtration products, including fan speed adjusters, carbon filters and HEPA filtration systems. We source these products from manufacturers in China and then sell them to a major U.S. distributor, Hydrofarm, who resells our products directly to consumers through retail distribution channels and in some cases, places its own branding on our products.

 

Specifically, we sell the following products:

 

Fan speed adjuster device. We provide a fan speed adjuster device to our client Hydrofarm. Designed specifically for centrifugal fans with brushless motors, our adjuster device helps ensure longer life by preventing damage to fan motors by adjusting the speed of centrifugal fans without causing the motor to hum. These devices are rated for 350 watts max, have 120VAC voltage capacity and feature an internal, electronic auto-resetting circuit breaker.

 

 

 

Our Fan Speed Adjuster Device

 

 

 

 45 

 

 

Carbon filter devices. We sell two types of carbon filter devices to our client Hydrofarm. These carbon filter devices are professional grade filters specifically designed and used to filter air in greenhouses that might be polluted by fermenting organics. One of these filters can be attached to a centrifugal fan to scrub the air in a constant circle or can be attached to an exhaust line as a single pass filter, which moves air out of the growing area and filters unwanted odors and removes pollens, dust, and other debris in the air. The other filter is designed to be used with fans from 0-6000 C.F.M.

 

 

Our Carbon Filter Device

 

HEPA filtration device. We provide a high-efficiency particulate arrestance (“HEPA”) filtration device at wholesale prices to our client Hydrofarm. Manufactured, tested, certified, and labeled in accordance with current HEPA filter standards, this device is targeted towards greenhouses and grow rooms and designed to keep insects, bacteria, and mold out of grow rooms. We sell these devices in various sizes.

 

 

Our HEPA Filtration Device

 

 

 

 46 

 

 

Digital light meter. We provide a handheld digital light meter that is used to measure luminance in fc units, or foot-candles.

 

 

Our Digital Light Meter Device

 

Quantum par meter. We provide a handheld quantum par meter used to measure photosynthetically active radiation (“PAR”). This fully portable handheld PAR meter is designed to measure PAR flux in wavelengths ranging from 400 to 700 nm. It is designed to measure up to 10,000 µmol.

 

 

Our Quantum Par Meter Device

 

 

 

 47 

 

 

Strategy behind the AVX Acquisition

 

On March 15, 2019, the Company completed a transaction with Patrick Calderone to purchase 100% of the outstanding stock of AVX, an IoT installation and management company based in southern California.

 

Through our acquisition of AVX, we are planning to offer ordinary families an entire smart home product line at a fraction of the current market price. We have finished the design of smart lighting control, air conditioner, sprinkler, garden light control, garage door control and heating control. We are developing a swimming pool control device, smoke detector and carbon monoxide monitor. We believe these product lines could be completed by the end of 2021.

 

Ubiquitor Wireless Universal Sensor Device

 

Our USIP technology is an advanced software and hardware integrated instrumentation platform that uses a large-scale modular design approach. The large-scale modular design approach subdivides instruments into a foundation component (a USIP) and architecture-specific components (sensor nodes), which together replaces the functions of traditional instruments at a fraction of their cost. The USIP has an open architecture, incorporating a variety of individual instrument functions, sensors, and probes from different industries and vendors. The platform features the ability to connect potentially thousands of different sensors or probes, addressing major limitations present in traditional instrumentation systems. We believe the platform represents a technological advancement in the IoT marketplace by integrating large numbers of technologies, including cloud technology, wired and wireless communication technology, software programming, instrumentation technology, artificial intelligence, PLC, and sensor networking into a single platform. The result of such integration is a smaller, cheaper and faster circuit system design than those currently offered in the instrumentation market.

 

The USIP, which is compatible with a significant percentage of the instruments currently manufactured, consists of universal and reusable hardware and software. The universal hardware in the USIP is (i) a smartphone, computer, or any mobile device capable of running our software that includes a display and either hardware controls or software control surfaces, and (ii) our Ubiquitor, which is designed to be the universal data logger that acts as a bridge between the computer or mobile device and the sensor nodes. We call our flagship USIP device the “Ubiquitor” due to its ability to measure and test a variety of electrical and physical phenomena such as voltage, current, temperature, pressure, sound, light, and humidity—both wired and wirelessly.

 

We have created and assembled prototype models of the Ubiquitor in limited quantities and plan to expand our assembly in 2021. Our prototype Ubiquitor is compatible with standard desktop computers running either Windows OS or MacOS and Android- or iOS-based mobile devices and acts as a conduit that communicates with a group of sensors or probes manufactured by different vendors in a manner that requires the user to have little or no knowledge of their unique specifications. The data readout is displayed on the computer or mobile device display in application software we have created for use with a Windows PC and are creating for use with a Mac. We are designing the application software (the “App”) to have a graphical representation of control and indicator elements common in traditional tangible instruments, such as knobs, buttons, dials, and graphs, etc. Utilizing the Ubiquitor and the App, users and instrument manufacturers will be free to add, remove or change a sensor module for their special industrial or educational application without needing to create their own application software and design their own hardware. Our developers are designing and implementing a soft control touch screen interface that supports real-time data monitoring and facilitates instrument control and operation.

 

Recently, the Company has devoted a substantial number of resources to research and development to bring the Ubiquitor and its App to full production and distribution. We anticipate that the sales and marketing involved with bringing the Ubiquitor to market will require us to hire a number of new employees in order to gain traction in the market. We intend to introduce the Ubiquitor in smart home installations to reduce costs and increase functionality, as well as implement the Ubiquitor device in greenhouses and other agricultural warehouses that require regulation of light, humidity, moisture, and other measurable scientific units required to create optimal growing conditions.

 

Our universal smart development protocol focuses not only on the design of the hardware and software modules but also on the design of the overall universal smart instruments system, guided by the principles of structure, universality and modularity.

 

 

 

 48 

 

 

Our Ubiquitor device is a fully modular system with a universal sensor node and gateway system that uses a computer or mobile device as the output display module responsible for displaying the readings of various sensor nodes. We have completed an initial production run of prototype Ubiquitor devices and intend to proceed into full-scale production. The Ubiquitor’s sensor analytics system integrates event-monitoring, storage and analytics software in a cohesive package that provides a holistic view of the sensor data it is reading.

 

The physical hardware consists of:

 

  1. The sensor nodes, which come in hundreds of different varieties of sensor instruments in the form of a USB stick, with both male and female ports; and

 

  2. The Ubiquitor as the main hardware gateway, which is a small cell phone-sized device with integrated circuits.

 

 

 

We believe the Ubiquitor device can connect up to thousands of potential sensor nodes, and integrate data using embedded software to display the data and all analytics onto a digital screen (desktop, smartphone or mobile device displays) using a Wi-Fi connection. As disclosed in our patent application, we have already tested up to 256 sensor instrument readouts. Most types of nodes and probes can connect to the hardware. If the sensor size is bigger than the standard probe size, it is possible to simply use a USB cable to connect the probe and the hub. All data and analytics are displayed on a single screen, with tools that record and keep track of all measurements, and sort and display analytic information in easy-to-read charts.

 

 

The Ubiquitor is a general platform that collects data in real time, up to 100 Hz per second; and thus, is intended to be adapted to many industrial uses.

 

 

 

 49 

 

 

By using the universal hardware or USIP, we believe we could achieve the following efficiencies in instrumentation systems:

 

  1. Cut production costs. Smartphone technology is widely used on the small sensor device market. By utilizing smartphone technology, the Ubiquitor will add superior functionality and performance, improve the product’s quality and cut production costs.

 

  2. Reduce the effort required to develop a new sensor product. With the Ubiquitor, we believe that there will be no need for device manufacturers to research and develop new monitoring and operating components because they will just need to develop new sensor nodes or probes that may be integrated into our software technology.

 

  3. Reduce clutter. It is anticipated that the Ubiquitor could dispense with some of the hassle of connecting cables, since the Ubiquitor allows wireless transmission of sensor data and may allow wireless access to networks, such as a PLC network.

 

We have not yet started research and development of a second generation Ubiquitor device, but once we demonstrate the market for this product, we intend to begin such research and development. Currently our research and development is focused on concepts we can implement in the current first generation Ubiquitor device.

 

Research and Development Efforts of Power Line Communication

 

Power Line Communication (“PLC”) is a communication technology that enables sending data over existing power cables. One advantage of this technology is that PLC does not require substantial new investment for its communications infrastructure. Rather, PLC utilizes existing power lines, thereby forming a distribution network that already penetrates all residential, commercial and industrial premises. Accordingly, connectivity via PLC is potentially the most cost-effective, scalable interconnectivity approach for the IoT. We believe PLC can be an integral part of our communication infrastructure for the IoT, which enables reliable, real-time measurements, monitoring and control. A large variety of appliances may be interconnected by transmitting data through the same wires that provide electrical energy.

 

Wireless networks allow multiple users to access large amounts of information without the hassle of running wires to and from each IoT device (See “Risk Factors” above). The 5G cellular network, for example, promises exciting advances for telecommunication service providers, but the implementation of the 5G network will be challenging. The implementation will require building out dense, low-latency edge networks in ways that are affordable, secure and easily maintainable. 5G antennas will be able to handle more users and to transmit more data, but they will have a shorter transmission range. 5G networks will also require frequencies of up to 300 GHz. This requirement means wireless carriers will need to bid for the costly higher spectrum bands to roll out their respective 5G networks. Generally speaking, wireless networks are typically slower and more expensive than existing wired networks and extremely susceptible to interference from radio signals, radiation, walls and other forms of interference. Additionally, wireless networks may be accessed by any device within range of the network’s signal, making the information transmitted on a wireless network susceptible to access by unauthorized recipients. We are currently developing a wired alternative to wireless networks that utilizes installed power lines to transmit information. Our PLC technology uses an ultra-narrow band spectrum channel of less than 1 KHz to establish a long-distance link between transmitter and receiver. Thus, we believe that our proprietary ultra-narrow band PLC technology will offer a promising alternative to wireless networks and provide the backbone communication infrastructure for IoT devices.

 

PLC has been around for many years, leading some to believe that it is a mature technology. Current leaders in the industry include Siemens (Germany), Netgear (US), ABB (Switzerland), Ametek (US), Schneider Electric (France), General Electric (US), TP-Link Technologies (China), D-Link (Taiwan), Landis+Gyr (Switzerland), and Nyx Hemera Technologies (Canada).

 

The primary design goal of the power line network is electric power distribution, not data transmission. Consequently, although PLC is an established technology, the harsh electrical noise present on power lines and variations in equipment and standards make communications over the power grid difficult and present a number of fundamental challenges for data transfer. Signals propagating along the power line are subjected to very large amounts of noise, attenuation, and distortion that make them erratic, with several attributes varying over time. PLC is susceptible to noise from devices linked to the power supply infrastructure, for example, fluorescent tube lights, drills, hair dryers, microwave ovens, computers, switch mode power supply, cellphone chargers, dimmers, refrigerators, televisions, washing machines, and vacuum cleaners. All the trials of PLC technology appear to have resulted in power companies and internet service providers deciding that the technology is not viable as a means of delivering broadband internet access. These technological challenges have impeded, or even halted, progression of PLC technology.

 

 

 

 50 

 

 

We are performing research and development with the intention of inventing our own ultra-narrow band PLC technology that attempts to tackle two challenges: 1) overcoming interference caused by electronic noise on the power line system; and 2) bandwidth. Preliminary internal testing suggests that we have achieved noise rejection and interference suppression at five orders of magnitude better than traditional PLC technology. We believe our ultra-narrow band PLC technology shows robustness against noise and interference, based on our internal testing where we found no detectable interference occurring when six industrial blowers, notorious for causing electrical noise, and a large air conditioning unit were connected to an electrical line passing a control signal. By comparison, a small air dryer is able to cause interference in legacy PLC systems. State of the art PLC technologies developed by other companies may offer sufficient bandwidth, but they cannot effectively deal with the interference of electric noise on the system. However, in our preliminary internal testing, we have been able to increase bandwidth to 4 megabits per second with the potential for more, while simultaneously effectively dealing with electrical noise and interference. Furthermore, such data transfer rates were delivered at a bandwidth of less than 1000 Hz, thereby achieving a bandwidth efficiency (measured as bits per second per Hz) greater than 4000. For comparison purposes, 4G cellular networks have a bandwidth efficiency of less than 6 due to their requirement of larger bandwidth resources. The demand for bandwidth resources will only grow with the upcoming 5G and proposed 6G networks. Accordingly, further research of our PLC technology is warranted as it shows promise for increased data transfer rates at a lower cost than either of the 5G and proposed 6G networks, particularly given such networks’ requirements for costly new infrastructure and bandwidth resources. Based on the promising results of our internal testing, we have begun designing a proprietary PLC microchip and have set an intended launch date for 2021.

  

 

We believe that because residential and commercial structures already include multiple power outlets, the power line infrastructure represents an excellent network to share data among intelligent devices, particularly in the smart home installations that we are currently performing through AVX. Using PLC technology would mean that the requirement for costly ethernet cable networks to carry network information could be eliminated, as the same signals may be carried on the existing power lines.

 

 

 

 51 

 

 

We plan to leverage the communications technology of PLC to enhance the Ubiquitor and make the Ubiquitor a central component of the smart home and gardening systems we are currently developing. The goal would be that our Ubiquitor would be used to send or receive control signals from a smart device, and control hundreds of devices in near real time. We intend to apply the same concept to commercial and industrial applications.

 

Also, we plan to design a full line of products for the gardening industry by integrating the Ubiquitor device into a gardening system. The system would include a light control node, temperature sensor, humidity sensor, digital light sensor, quantum PAR sensor, pH sensor, total dissolved solids (“TDS”) sensor and carbon dioxide sensor design. We believe the combination of these sensors would offer the same features as a combination of dozens or even hundreds of different instruments in the gardening industry. The Ubiquitor would be used to replace these devices and could offer another case study of the effectiveness of the application of universal smart technology to such systems.

 

The development of universal smart instruments and the IoT have a considerable amount of overlap, with the only difference being the number of sensor nodes involved. We plan to take advantage of this overlap and unify universal smart instruments and the IoT into a single system, building the IoT infrastructure for both residential and commercial uses and charging monthly subscription fees. End users will be able to plug any peripheral devices into the power outlet and enjoy the IoT connectivity throughout their home.

 

Eventually, we hope to establish five divisions to bring our technology together: 1) AVX with new shared distributed smart home products powered by the Ubiquitor; 2) an IT division in software machine design; 3) Universal Smart Instrumentation; 4) PLC; and 5) an IoT division.

 

Intellectual Property Protection

 

On November 4, 2016, we filed a U.S. patent application number 15/344,041 with the USPTO. On March 5, 2018, we issued a press release announcing that the USPTO published an Issue Notification for U.S. Patent Application No. 9924295 entitled “Universal Smart Device,” which covers a patent application regarding the Company’s Universal Smart Device. The patent was issued on March 20, 2018.

 

Subsequent to our internal research and development efforts, we filed with the USPTO on June 2, 2017 a patent application regarding a process for improving a spectral response curve of a photo sensor. The small and cost-effective multicolor sensor and its related software protected by the patent we believe could achieve a spectral response that approximates an ideal photo response to take optical measurement. The patent was issued on February 26, 2019.

 

In addition, we have been notified that the USPTO published a notice of allowance for a patent application we filed on March 12, 2018 as application No. 15/925,400. The patent title is a “Universal Smart Device,” which is a universal smart instrument that unifies heterogeneous measurement probes into a single device that can analyze, publish, and share the data analyzed. The issue fee was paid on March 14, 2019.

 

On November 29, 2019, the Company filed an international utility patent application filed through the patent cooperation treaty as application PCT/US2019/63880. In April 2020, the Company was notified that it received a favorable international search report from the International Searching Authority regarding this patent application, which patents the Company’s PLC technology. The World International Property Organization report cited only three category “A” documents, indicating that the Company’s application met both the novelty and non-obviousness patentability requirements. Consequently, the Company is optimistic that the patent covering the claims for its PLC technology will be issued in due course and will allow the Company to implement strong protections on the PLC technology worldwide.

 

Competitors

 

There are several competitors we have identified in the wireless sensor node industry, including traditional instruments or devices manufacturers such as Hanna Instruments and Extech Instruments.

 

 

 

 52 

 

 

Hach developed and launched the SC1000 Multi-parameter Universal Controller, a probe module for connecting up to 32 digital sensors or analyzers. However, their products are not compatible with smart phones yet; and we believe their price point is still prohibitive to consumers.

 

Monnit Corporation offers a range of wireless and remote sensors. Many of Monnit’s products are web-based wireless sensors that usually are not portable because of their power consumption. Also, the sensors’ real-time updates are slow; and we believe security of the web-based sensor data acquisition also may be a concern. In addition to purchasing the device, consumers usually have to pay monthly fees for using web-based services.

 

We are not trying to compete with traditional instruments or device manufacturers because we utilize our Ubiquitor device in conjunction with our smartphone application, which we believe will be a completely different product category.

 

Market Potential

 

We believe that wireless universal smart technology will play a critical role for traditional instrument manufacturers, as it is too expensive and difficult to develop for medium or smaller companies. The cost factor is the first consideration when deciding whether a company wants to develop smart wireless technologies and implement them in their products or use them in their field testing. We also hope to play a role in academic laboratories, particularly with smaller academic laboratories who are sensitive to price.

 

Results of Operations

 

For the year ended December 31, 2020 compared to the year ended December 31, 2019

 

Revenue, Cost of Sales and Gross Profit

 

Our consolidated gross revenue for the years ended December 31, 2020 and 2019 was $1,678,967 and $1,460,370, respectively, which included revenue from related parties of $26,449 and $14,184, respectively. Revenue for the year ended December 31, 2020 increased $218,597 due to the acquisition of AVX, resulting in gross profit of $283,780 and $118,231 for the years ended December 31, 2020 and 2019, respectively.

 

Operating Costs and Expenses

 

The major components of our operating expenses for the years ended December 31, 2020 and 2019 are outlined in the table below:

 

   For the year ended December 31, 2020   For the year ended December 31, 2019   Increase
(Decrease)
$
 
Selling expense  $22,590   $46,624   $(24,034)
Officer compensation   142,100    150,154    (8,054)
Research and development   256,636    255,232    1,404 
Professional fees   1,297,160    1,376,995    (79,835)
General and administrative   1,269,207    1,113,201    156,006 
Goodwill impairment       458,490    (458,490)
Intangible assets impairment       47,975    (47,975)
Total operating expenses  $2,987,693   $3,448,671   $(460,978)

 

 

 

 53 

 

 

Selling expense for the year ended December 31, 2020 was $22,590, compared to $46,624 for the year ended December 31, 2019. In 2019, the Company acquired AVX, consolidating its selling expenses for its operation. Selling expense incurred was mainly from third party advertising fees. The decrease of selling expense was due to a decrease in advertising fees.

 

Officer compensation was $142,100 and $150,154 for the years ended December 31, 2020 and 2019, respectively. The decrease was due to an adjustment of the Chief Financial Officer’s compensation.

 

Research and development costs were $256,636 and $255,232 for the years ended December 31, 2020 and 2019, respectively. The increase was due to an increase of supplies needed for research and development in 2020.

 

Professional fees were $1,376,995 during the year ended December 31, 2019 compared to $1,297,160 during the year ended December 31, 2020. The decrease in professional fees mainly resulted from accounting fees as we have in house accounting department handling our accounting work.

 

General and administrative expenses of $1,269,207 incurred during the year ended December 31, 2020 primarily consisted of salaries of $491,638, insurance expense of $210,949 and depreciation expense of $162,242. General and administrative expenses of $1,113,201 incurred during the year ended December 31, 2019 primarily consisted of salaries of $462,833, insurance expense of $182,110, and depreciation expense of $151,670. The increase was due to increased salaries, increased insurance premiums, and depreciation expense. Salary expense increased due to additional employees from the acquired entity as well as additional employees hired. The increase in insurance expense is due to the acquisition of AVX as well as NASDAQ uplisting related expenses and an increase in insurance premiums. Depreciation expense increased mainly due to additional fixed assets acquired with AVX.

 

Net Losses

 

During the years ended December 31, 2020 and 2019, we incurred net losses of $2,537,113 and $3,175,543 respectively, due to the factors discussed above.

 

 

Liquidity and Capital Resources

 

Working Capital

 

   December 31,
2020
   December 31,
2019
 
Current Assets  $1,007,630   $2,440,112 
Current Liabilities   (527,559)   (432,999)
Working Capital  $480,071   $2,007,113 

 

Cash Flows

 

The table below, for the periods indicated, provides selected cash flow information:

 

   For the year ended December 31, 2020   For the year ended December 31, 2019 
Net cash used in operating activities  $(1,955,091)  $(1,697,771)
Net cash used in investing activities   (1,314)   (565,110)
Net cash provided by financing activities   346,860     
Net change in cash  $(1,609,545)  $(2,262,881)

 

 

 

 54 

 

 

Cash Flows from Operating Activities

 

Our net cash outflows from operating activities of $1,955,091 for the year ended December 31, 2020 was primarily the result of our net loss of $2,537,113 and changes in our operating assets and liabilities offset by the add-back of non-cash expenses. The change in operating assets and liabilities includes an increase in accounts receivable of $75,125, decrease in inventory of $21,289, increase in prepaid expenses of $44,282, increase in deposits of $100,000, increase in accounts payable and accrued liabilities of $8,132, increase in accounts payable – related party of $17,471, decrease in other current liabilities of $12,238, decrease in interest payable – related party of $1,750, decrease in customer deposit of $70,294, and increase in other liabilities of $4,800.

 

Non-cash expense included add-backs of $21,907 in bad debt expense, $162,242 in depreciation expense, $48,000 in stock-based compensation, $605,150 in stock option compensation, reduction in inventory reserve of $852 and a net of $2,428 in amortization of right-of-use assets. Our net cash outflows from operating activities of $1,697,771 for the year ended December 31, 2019, was primarily the result of our net loss of $3,175,543 and changes in our operating assets and liabilities offset by the add-back of non-cash expenses. The change in operating assets and liabilities includes a decrease in accounts receivable of $102,956, decrease of accounts receivable – related party of $39,625, decrease in inventory of $15,932, decrease in prepaid expenses of $68,862, decrease in deposits of $7,210, decrease in accounts payable and accrued liabilities of $38,705, decrease in accounts payable – related party of $4,921, increase in other current liabilities of $9,610, increase in interest payable – related party of $1,750, increase  in customer deposits of $77,540, and increase in other liabilities of $12,335.

 

Non-cash expense includes add-backs of $5,175 in bad debt expense, $6,448 in inventory reserve, $151,670 in depreciation expense, $9,025 in amortization of intangible assets, $47,975 in impairment of intangible assets, $458,490 in impairment of goodwill, net of $673 in amortization of right-of-use asset, $75,218 in stock-based compensation, and $432,250 in stock option compensation.  

 

We expect that cash flows from operating activities may fluctuate in future periods as a result of a number of factors, including fluctuations in our net revenues and operating results, utilization of new revenue streams, collection of accounts receivable, and timing of billings and payments.

 

Cash Flows from Investing Activities

 

For the year ended December 31, 2020 we had cash outflow from investing activities of $ 1,314 from the purchase of property and equipment. The Company acquired AVX in March 2019, resulting in a cash outflow from investment activities of $565,110 for the year ended December 31, 2019, which includes $216,592 in purchases of property and equipment, $201,482 cash provided from the acquisition of AVX, and $550,000 cash paid for the acquisition.

 

Cash Flows from Financing Activities

 

For the year ended December 31, 2020 the Company paid off a promissory note, resulting in cash outflows of $50,000 and obtained loans from the SBA in the amount of $396,860. For the year ended December 31, 2019, there was no cash flow from financing activities.

 

Going Concern

 

These financial statements have been prepared on a going concern basis, which assumes the Company will continue to realize its assets and discharge its liabilities in the normal course of business. The continuation of the Company as a going concern is dependent upon the continued financial support from its shareholders, the ability of the Company to repay its debt obligations, to obtain necessary equity financing to continue operations, and the attainment of profitable operations. Recently, the Company has devoted a substantial amount of resources to research and development to bring the Ubiquitor and its mobile application to full production and distribution. For the year ended December 31, 2020, the Company had a net loss of $2,537,113 and negative cash flow from operating activities of $1,955,091. As of December 31, 2020, the Company also had an accumulated deficit of $9,716,114. These factors raise certain doubts regarding the Company’s ability to continue as a going concern. There are no assurances, however, that the Company will be successful in obtaining an adequate level of financing for the long-term development and commercialization of its Ubiquitor product.

 

 

 

 55 

 

 

Off-Balance Sheet Arrangements

 

As of December 31, 2020, we did not have any off-balance-sheet arrangements, as defined in Item 303(a)(4)(ii) of Regulation SK.

  

Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

 

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 56 

 

 

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

FOCUS UNIVERSAL INC. AND SUBSIDIARY

FOR THE YEARS ENDED DECEMBER 31, 2020, AND 2019

 

Index to the Financial Statements

 

Contents Page
   
Report of Independent Registered Public Accounting Firm F-2
   
Consolidated Balance Sheets as of December 31, 2020 and 2019 F-3
   
Consolidated Statements of Operations for the Years Ended December 31, 2020 and 2019 F-4
   
Consolidated Statements of Changes in Stockholders’ Equity for the Years ended December 31, 2020 and 2019 F-5
   
Consolidated Statements of Cash Flows for the Years Ended December 31, 2020 and 2019 F-6
   
Notes to the Consolidated Financial Statements F-7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 F-1 

 

 

Report of Independent Registered Public Accounting Firm

 

To the shareholders and the board of directors of Focus Universal, Inc.

 

Opinion on the Financial Statements

 

We have audited the accompanying consolidated balance sheets of Focus Universal, Inc. (the “Company”) as of December 31, 2020 and 2019, the related statement of operations, stockholders’ equity, and cash flows for the years then ended, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2020 and 2019, and the results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States.

 

Basis for Opinion

 

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud.

 

Our audit included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audit provides a reasonable basis for our opinion.

 

Substantial Doubt about the Company’s Ability to Continue as a Going Concern

 

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 2 to the financial statements, the Company’s significant operating losses raise substantial doubt about its ability to continue as a going concern. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

 

 

 

/s/ BF Borgers CPA PC

BF Borgers CPA PC

 

We have served as the Company’s auditor since 2017

Lakewood, CO

March 23, 2021

 

 

 

 

 

 

 F-2 

 

 

FOCUS UNIVERSAL INC.

CONSOLIDATED BALANCE SHEETS

 

   December 31,   December 31, 
   2020   2019 
         
ASSETS
Current Assets:          
Cash  $583,325   $2,192,870 
Accounts receivable, net   190,556    137,338 
Inventories, net   42,496    62,933 
Prepaid expenses   91,253    46,971 
Deposit - current portion   100,000     
Total Current Assets   1,007,630    2,440,112 
           
Property and equipment, net   4,492,510    4,653,438 
Operating lease right-of-use asset   86,558    128,399 
Deposits   6,630    6,630 
           
Total Assets  $5,593,328   $7,228,579 
           
LIABILITIES AND STOCKHOLDERS' EQUITY          
Current Liabilities:          
Accounts payable and accrued liabilities  $198,870   $192,488 
Accounts payable - related party   17,471     
Other current liabilities   6,332    16,820 
Interest payable - related party       1,750 
Customer deposit   57,377    127,671 
Loan, current portion   194,125     
Lease liability, current portion   53,384    44,270 
Promissory note short term - related party       50,000 
Total Current Liabilities   527,559    432,999 
           
Non-Current Liabilities:          
Lease liability, less current portion   41,287    94,670 
Loan, less current portion   202,735     
Other liability   17,135    12,335 
Total Non-Current Liabilities   261,157    107,005 
           
Total Liabilities   788,716    540,004 
           
Contingencies (Note 11)        
           
Stockholders' Equity:          
Common stock, par value $0.001 per share, 75,000,000 shares authorized; 40,959,741 shares issued and outstanding as of December 31, 2020 and 2019, respectively   40,959    40,959 
Additional paid-in capital   14,381,058    13,775,908 
Shares to be issued, common shares   98,709    50,709 
Accumulated deficit   (9,716,114)   (7,179,001)
Total Stockholders' Equity   4,804,612    6,688,575 
           
Total Liabilities and Stockholders' Equity  $5,593,328   $7,228,579 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

 

 F-3 

 

 

FOCUS UNIVERSAL INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

 

   Years ended December 31,  
   2020   2019 
Revenue  $1,652,518   $1,446,186 
Revenue - related party   26,449    14,184 
Total Revenue   1,678,967    1,460,370 
Cost of Revenue   1,395,187    1,342,139 
           
Gross Profit   283,780    118,231 
           
Operating Expenses:          
Selling expense   22,590    46,624 
Compensation - officers   142,100    150,154 
Research and development   256,636    255,232 
Professional fees   1,297,160    1,376,995 
General and administrative   1,269,207    1,113,201 
Goodwill impairment       458,490 
Intangible assets impairment       47,975 
Total Operating Expenses   2,987,693    3,448,671 
           
Loss from Operations   (2,703,913)   (3,330,440)
           
Other Income (Expense):          
Interest income (expense), net   (4,072)   2,257 
Interest (expense) - related party   (81)   (1,750)
Other income   170,953    154,390 
Total other income (expense)   166,800    154,897 
           
Loss before income taxes   (2,537,113)   (3,175,543)
           
Income tax expense        
           
Net Loss  $(2,537,113)  $(3,175,543)
           
Weight Average Number of Common Shares Outstanding: Basic and Diluted   40,959,741    40,945,807 
           
Net Loss per common share: Basic and Diluted  $(0.06)  $(0.08)

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

 

 F-4 

 

 

FOCUS UNIVERSAL INC.

CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS’ EQUITY

FOR THE YEARS ENDED DECEMBER 31, 2020 and 2019

 

           Additional   Shares to be       Total 
   Common stock   Paid-In   issued   Accumulated   Stockholders' 
Description  Shares   Amount   Capital   Common Shares   Deficit   Equity 
Balance - December 31, 2018   40,907,010   $40,907   $12,956,486   $72,000   $(4,003,458)  $9,065,935 
                               
Common stock issued for prior period service   10,133    10    71,990    (72,000)        
                               
Common stock issued for service   3,312    3    24,506            24,509 
                               
Common stock issued for acquisition   39,286    39    290,676            290,715 
                               
Common stock to be issued for services               50,709        50,709 
                               
Stock options issued for services           432,250            432,250 
                               
Net loss                   (3,175,543)   (3,175,543)
                               
Balance - December 31, 2019   40,959,741    40,959    13,775,908    50,709    (7,179,001)   6,688,575 
                               
Stock options issued for services           605,150            605,150 
                               
Common stock to be issued for services               48,000        48,000 
                               
Net loss                   (2,537,113)   (2,537,113)
                               
Balance - December 31, 2020   40,959,741    40,959    14,381,058    98,709    (9,716,114)   4,804,612 

 

The accompanying notes are an integral part of these consolidated financial statements

 

 

 

 F-5 

 

 

FOCUS UNIVERSAL INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

 

 

   For the Years Ended December 31,  
   2020   2019 
Cash flows from operating activities:          
Net Loss  $(2,537,113)  $(3,175,543)
Adjustments to reconcile net loss to net cash from operating activities:          
Bad debt expense   21,907    5,175 
Inventories reserve   (852)   6,448 
Depreciation expense   162,242    151,670 
Amortization of intangible assets       9,025 
Impairment of intangible assets       47,975 
Impairment of goodwill       458,490 
Amortization of right-of-use assets   (2,428)   (673)
Stock-based compensation   48,000    75,218 
Stock option compensation   605,150    432,250 
Changes in operating assets and liabilities:          
Accounts receivable   (75,125)   102,956 
Accounts receivable - related party       39,625 
Inventories   21,289    15,932 
Prepaid expenses   (44,282)   68,862 
Deposit - Current portion   (100,000)    
Deposits       7,210 
Accounts payable and accrued liabilities   8,132    (38,705)
Accounts payable - related party   17,471    (4,921)
Other current liabilities   (12,238)   9,610 
Interest payable - related party   (1,750)   1,750 
Customer deposit   (70,294)   77,540 
Other liabilities   4,800    12,335 
Net cash flows used in operating activities   (1,955,091)   (1,697,771)
           
Cash flows from investing activities:          
Cash from acquisition       201,482 
Purchase of property and equipment   (1,314)   (11,148)
Cash paid for building improvement       (205,444)
Cash paid for acquisition       (550,000)
Net cash flows used in investing activities   (1,314)   (565,110)
           
Cash flows from financing activities:          
Proceeds from SBA loan   396,860     
Payment on promissory note   (50,000)    
Net cash flows provided by financing activities   346,860     
           
Net change in cash   (1,609,545)   (2,262,881)
           
Cash beginning of period   2,192,870    4,455,751 
           
Cash end of period  $583,325   $2,192,870 
           
Supplemental cash flow disclosure:          
Cash paid for income taxes  $   $ 
Cash paid for interest  $1,831   $ 
           
Supplemental disclosures of non-cash investing and financing activities:          
Promissory note issued for acquisition  $   $50,000 
Shares issued for acquisition  $   $290,716 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 F-6 

 

 

FOCUS UNIVERSAL INC.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS

DECEMBER 31, 2020 AND 2019

 

Note 1 – Organization and Operations

 

Focus Universal Inc. (“Focus”) was incorporated under the laws of the State of Nevada on December 4, 2012 (“Inception”). It is a universal smart instrument developer and manufacturer, headquartered in the Los Angeles, California metropolitan area, specializing in the development and commercialization of novel and proprietary universal smart technologies and instruments. Universal smart technology is an off-the-shelf technology utilizing an innovative hardware integrated platform. The Focus platform provides a unique and universal combined wired and wireless solution for embedded design, industrial control, functionality test, and parameter measurement instruments and functions. Our smart technology software utilizes a smartphone, computer, or a mobile device as an interface platform and display that communicates and works in tandem with a group of external sensors or probes, or both. The external sensors and probes may be manufactured by different vendors, but the universal smart technology functions in a manner that does not require the user to have extensive knowledge of the unique characteristics of the function of each of the sensors and probes. The universal smart instrument Focus developed (the “Ubiquitor”) consists of a reusable foundation component which includes a wireless gateway (which allows the instrument to connect to the smartphone via Bluetooth and WiFi technology), universal smart application software (“Application”) which is installed on the user’s smartphone or other mobile device and allows monitoring of the sensor readouts on the smartphone screen. The Ubiquitor also connects to a variety of individual scientific sensors that collect data, from moisture, light, airflow, voltage, and a wide variety of applications. The data then sent through a wired or wireless connection, or a combination thereof to the smartphone or other mobile device and the data is organized and displayed on the smartphone screen. The smartphone or other mobile device, foundation, and sensor readouts together perform the functions of many traditional scientific and engineering instruments and are intended to replace the traditional, wired stand-alone instruments at a fraction of their cost.

 

Perfecular Inc. (“Perfecular”) was founded in September 2009 and is headquartered in Ontario, California, and is engaged in designing certain digital sensor products and sells a broad selection of horticultural sensors and filters in North America and Europe.

 

AVX Design & Integration, Inc. (“AVX”) was incorporated on June 16, 2000 in the state of California. AVX is an internet of things (“IoT”) installation and management company specializing in high performance and easy to use Audio/Video, Home Theater, Lighting Control, Automation and Integration. Services provided by AVX include full integration of houses, apartment, commercial complex, office spaces with audio, visual and control systems to fully integrate devices in the low voltage field. AVX’s services also include partial equipment upgrade and installation.

 

Note 2 – Summary of Significant Accounting Policies

 

Basis of Presentation

 

The accompanying consolidated financial statements include the accounts of Focus and its wholly-owned subsidiaries, Perfecular Inc. and AVX Design & Integration, Inc. (collectively, the “Company”, “we”, “our”, or “us”). All intercompany balances and transactions have been eliminated upon consolidation. The Company’s consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”).

 

Going Concern

 

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern basis, which assumes the Company will continue to realize its assets and discharge its liabilities in the normal course of business. The continuation of the Company as a going concern is dependent upon the continued financial support from its shareholders, the ability of the Company to repay its debt obligations, to obtain necessary equity financing to continue operations, and the attainment of profitable operations. Recently, the Company has devoted a substantial amount of resources to research and development to bring the Ubiquitor and its mobile application to full production and distribution. For the year ended December 31, 2020, the Company had a net loss of $2,537,113 and negative cash flow from operating activities of $1,955,091. As of December 31, 2020, the Company also had an accumulated deficit of $9,716,114. These factors raise certain doubts regarding the Company’s ability to continue as a going concern. There are no assurances, however, that the Company will be successful in obtaining an adequate level of financing for the long-term development and commercialization of its Ubiquitor product.

 

 

 F-7 

 

 

Principles of Consolidation

 

The accompanying consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries, Perfecular Inc. and AVX Design & Integration. Focus and Perfecular, collectively “the entities” were under common control; therefore, in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 805-50-45, the acquisition of Perfecular was accounted for as a business combination between entities under common control and treated similar to a pooling of interest transaction. On March 15, 2019, Focus entered into a stock purchase agreement with AVX whereby Focus purchased 100% of the outstanding stock of AVX. All significant intercompany transactions and balances have been eliminated.

 

Segment Reporting

 

The Company currently has two operating segments. In accordance with ASC 280, Segment Reporting (“ASC 280”), the Company considers operating segments to be components of the Company’s business for which separate financial information is available and evaluated regularly by Management in deciding how to allocate resources and to assess performance. Management reviews financial information presented on a consolidated basis for purposes of allocating resources and evaluating financial performance. Accordingly, the Company has determined that it has two operating and reportable segments.

 

Asset information by operating segment is not presented as the chief operating decision maker does not review this information by segment. The reporting segments follow the same accounting policies used in the preparation of the Company’s   consolidated financial statements.

 

Use of Estimates

 

The preparation of consolidated financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities as of the date of the accompanying consolidated financial statements, and the reported amounts of revenues and expenses during the reporting period. The Company bases its estimates and assumptions on current facts, historical experience and various other factors that it believes to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities and the accrual of costs and expenses that are not readily apparent from other sources.

 

The actual results experienced by the Company may differ materially and adversely from the Company’s estimates. To the extent there are material differences between the estimates and the actual results, future results of operations will be affected. Significant estimates in the accompanying financial statements include the lease term impacting right-of use asset and lease liability, useful lives of property and equipment, useful lives of intangible assets, allowance for doubtful accounts, inventory reserves, debt discounts, valuation of derivatives, and the valuation allowance on deferred tax assets. The Company regularly evaluates its estimates and assumptions.

 

Cash

 

The Company considers all highly liquid investments with a maturity of three months or less to be cash. At times, such investments may be in excess of Federal Deposit Insurance Corporation (FDIC) insurance limit. There were no cash equivalents held by the Company at December 31, 2020 and 2019.

 

Accounts Receivable

 

The Company grants credit to clients that sell the Company’s products or engage in construction service under credit terms that it believes are customary in the industry and do not require collateral to support customer receivables. The accounts receivable balances are generally collected within 30 to 90 days of the product sale.

 

 

 

 F-8 

 

 

Allowance for doubtful accounts

 

The Company estimates an allowance for doubtful accounts based on historical collection trends and review of the current status of trade accounts receivable. It is reasonably possible that the Company's estimate of the allowance for doubtful accounts will change. As of December 31, 2020 and 2019, allowance for doubtful accounts amounted to $44,519 and $22,612, respectively.

 

Concentrations of Credit Risk

 

Financial instruments that potentially subject the Company to concentrations of credit risk consist primarily of cash and cash equivalents. The Company limits its exposure to credit loss by investing its cash with high credit quality financial institutions.

 

Inventory

 

Inventory consists primarily of parts and finished goods and is valued at the lower of the inventory’s cost or net realizable value under the first-in-first-out method. Management compares the cost of inventory with its market value and an allowance is made to write down inventory to market value, if lower. Inventory allowances are recorded for obsolete or slow-moving inventory based on assumptions about future demand and marketability of products, the impact of new product introductions and specific identification of items, such as discontinued products. These estimates could vary significantly from actual requirements, for example, if future economic conditions, customer inventory levels or competitive conditions differ from expectations. The Company regularly reviews the value of inventory based on historical usage and estimated future usage. If estimated realized value of our inventory is less than cost, we make provisions in order to reduce its carrying value to its estimated market value. As of December 31, 2020 and 2019, inventory reserve amounted to $ 70,562 and $71,414, respectively.

 

Property and Equipment

 

Property and equipment are stated at cost. The cost and accumulated depreciation of assets sold or retired are removed from the respective accounts and any gain or loss is included in earnings. Maintenance and repairs are expensed currently. Major renewals and betterments are capitalized. Depreciation is computed using the straight-line method. Estimated useful lives are as follows:

 

Fixed assets Useful life
Furniture 5 years
Equipment 5 years
Warehouse 39 years
Improvement 5 years
Construction in progress
Land

 

Long-Lived Assets

 

The Company applies the provisions of FASB ASC Topic 360, Property, Plant, and Equipment, which addresses financial accounting and reporting for the impairment or disposal of long-lived assets. ASC 360 requires impairment losses to be recorded on long-lived assets used in operations when indicators of impairment are present and the undiscounted cash flows estimated to be generated by those assets are less than the assets’ carrying amounts. In that event, a loss is recognized based on the amount by which the carrying value exceeds the fair value of the long-lived assets. Loss on long-lived assets to be disposed of is determined in a similar manner, except that fair values are reduced for the cost of disposal. Long-term assets of the Company are reviewed when circumstances warrant as to whether their carrying value has become impaired. The Company considers assets to be impaired if the carrying value exceeds the future projected cash flows from related operations. The Company also re-evaluates the periods of amortization to determine whether subsequent events and circumstances warrant revised estimates of useful lives. Based on its review at December 31, 2020 and 2019, the Company believes there was no impairment of its long-lived assets.

 

 

 

 F-9 

 

 

Intangible Assets

 

The Company’s intangible assets were acquired from AVX. Amortization is computed using the straight-line method, and the Company evaluates for impairments annually. During the year ended December 31, 2019, the Company determined that the intangible assets associated with the acquisition of AVX was fully impaired. During the year ended December 31, 2019, impairment for intangible assets amounted to $47,975. Estimated useful lives of intangible assets are as follows:

 

Intangible assets Useful life
Market related intangible assets 5 years

 

Goodwill

 

Goodwill represents the excess of the purchase price over the fair value of net assets acquired in a business combination. Goodwill with indefinite useful lives are tested for impairment at least annually at December 31 and whenever triggering events or changes in circumstances indicate its carrying value may not be recoverable. Assessment of the potential impairment of goodwill is an integral part of the Company’s normal ongoing review of operations. Testing for potential impairment of these assets is significantly dependent on numerous assumptions and reflects management’s best estimates at a particular point in time. The dynamic economic environments in which the Company’s businesses operate and key economic and business assumptions related to projected selling prices, market growth, inflation rates and operating expense ratios, can significantly affect the outcome of impairment tests. Estimates based on these assumptions may differ significantly from actual results. Changes in factors and assumptions used in assessing potential impairments can have a significant impact on the existence and magnitude of impairments, as well as the time in which such impairments are recognized. The management tests for impairment annually at year end. During the year ended December 31, 2019, the Company determined that the goodwill associated with the acquisition of certain AVX assets was impaired and took a charge to earnings of $458,490.

 

Share-based Compensation

 

The Company accounts for stock-based compensation to employees in conformity with the provisions of ASC Topic 718, Stock-Based Compensation. Stock-based compensation to employees consist of stock options grants and restricted shares that are recognized in the statement of operations based on their fair values at the date of grant.

 

The measurement of stock-based compensation is subject to periodic adjustments as the underlying equity instruments vest and is recognized as an expense over the period which services are received.

 

The Company calculates the fair value of option grants utilizing the Black-Scholes pricing model and estimates the fair value of the stock based upon the estimated fair value of the common stock. The amount of stock-based compensation recognized during a period is based on the value of the portion of the awards that are ultimately expected to vest.

 

The resulting stock-based compensation expense for both employee and non-employee awards is generally recognized on a straight- line basis over the requisite service period of the award.

 

Fair Value of Financial Instruments

 

The Company follows paragraph ASC 825-10-50-10 for disclosures about fair value of its financial instruments and paragraph ASC 820-10-35-37 (“Paragraph 820-10-35-37”) to measure the fair value of its financial instruments. Paragraph 820-10-35-37 establishes a framework for measuring fair value in accounting principles generally accepted in the United States of America (U.S. GAAP), and expands disclosures about fair value measurements.

 

 

 

 F-10 

 

 

To increase consistency and comparability in fair value measurements and related disclosures, Paragraph 820-10-35-37 establishes a fair value hierarchy which prioritizes the inputs to valuation techniques used to measure fair value into three (3) broad levels. The fair value hierarchy gives the highest priority to quoted prices (unadjusted) in active markets for identical assets or liabilities and the lowest priority to unobservable inputs. The three (3) levels of fair value hierarchy defined by Paragraph 820-10-35-37 are described below:

 

  Level 1: Quoted market prices available in active markets for identical assets or liabilities as of the reporting date.

 

  Level 2: Pricing inputs other than quoted prices in active markets included in Level 1, which are either directly or indirectly observable as of the reporting date.

 

  Level 3: Pricing inputs that are generally unobservable inputs and not corroborated by market data.

 

Financial assets are considered Level 2 when their fair values are determined using pricing models, discounted cash flow methodologies or similar techniques and at least one significant model assumption or input is unobservable.

 

The carrying amount of the Company’s financial assets and liabilities, such as cash, prepaid expenses, accounts payable and accrued expenses, approximate their fair value because of the short maturity of those instruments.

 

Transactions involving related parties cannot be presumed to be carried out on an arm's-length basis, as the requisite conditions of competitive, free-market dealings may not exist. Representations about transactions with related parties, if made, shall not imply that the related party transactions were consummated on terms equivalent to those that prevail in arm's-length transactions unless such representations can be substantiated.

 

However, it is not practical to determine the fair value of advances from stockholders, if any, due to their related party nature.

 

Revenue Recognition

 

On September 1, 2018, the Company adopted ASC 606 – Revenue from Contracts with Customers using the modified retrospective transition approach. The core principle of ASC 606 is that revenue should be recognized in a manner that depicts the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled for exchange of those goods or services. The Company’s updated accounting policies and related disclosures are set forth below, including the disclosure for disaggregated revenue. The impact of adopting ASC 606 was not material to the Consolidated Financial Statements.

 

Revenue from the Company is recognized under Topic 606 in a manner that reasonably reflects the delivery of its services and products to customers in return for expected consideration and includes the following elements:

 

  executed contracts with the Company’s customers that it believes are legally enforceable;

 

  identification of performance obligations in the respective contract;

 

  determination of the transaction price for each performance obligation in the respective contract;

 

  allocation the transaction price to each performance obligation; and

 

  recognition of revenue only when the Company satisfies each performance obligation.

 

 

 

 F-11 

 

 

These five elements, as applied to each of the Company’s revenue category, is summarized below:

 

  Product sales – revenue is recognized at the time of sale of equipment to the customer.

 

  Service sales – revenue is recognized based on the service been provided to the customer.

 

Revenue from our project construction is recognized over time using the percentage-of-completion method under the cost approach. The percentage of completion is determined by estimating stage of work completed. Under this approach, recognized contract revenue equals the total estimated contract revenue multiplied by the percentage of completion. Our construction contracts are unit priced, and an account receivable is recorded for amounts invoiced based on actual units produced.

 

Cost of Revenue

 

Cost of revenue includes the cost of services, labor and product incurred to provide product sales, service sales and project sales.

 

Research and development

 

Research and development costs are expensed as incurred. Research and development costs primarily consist of efforts to refine existing product models and develop new product models.

 

Related Parties

 

The Company follows ASC 850-10 for the identification of related parties and disclosure of related party transactions. Pursuant to ASC 850-10-20 the related parties include: a) affiliates of the Company; b) entities for which investments in their equity securities would be required, absent the election of the fair value option under the Fair Value Option Subsection of ASC 825–10–15, to be accounted for by the equity method by the investing entity; c) trusts for the benefit of employees, such as pension and profit-sharing trusts that are managed by or under the trusteeship of management; d) principal owners of the Company; e) management of the Company; f) other parties with which the Company may deal if one party controls or can significantly influence the management or operating policies of the other to an extent that one of the transacting parties might be prevented from fully pursuing its own separate interests; and g) other parties that can significantly influence the management or operating policies of the transacting parties or that have an ownership interest in one of the transacting parties and can significantly Influence the other to an extent that one or more of the transacting parties might be prevented from fully pursuing its own separate interests.

 

The consolidated financial statements shall include disclosures of material related party transactions, other than compensation arrangements, expense allowances, and other similar items in the ordinary course of business. However, disclosure of transactions that are eliminated in the preparation of consolidated financial statements is not required in those statements. The disclosures shall include: (a) the nature of the relationship(s) involved; (b) a description of the transactions, including transactions to which no amounts or nominal amounts were ascribed, for each of the periods for which income statements are presented, and such other information deemed necessary to an understanding of the effects of the transactions on the consolidated financial statements; (c) the dollar amounts of transactions for each of the periods for which income statements are presented and the effects of any change in the method of establishing the terms from that used in the preceding period; and (d) amounts due from or to related parties as of the date of each balance sheet presented and, if not otherwise apparent, the terms and manner of settlement.

 

Commitments and Contingencies

 

The Company follows ASC 450-20 to report accounting for contingencies. Certain conditions may exist as of the date the consolidated financial statements are issued, which may result in a loss to the Company but which will only be resolved when one or more future events occur or fail to occur. The Company assesses such contingent liabilities, and such assessment inherently involves an exercise of judgment. In assessing loss contingencies related to legal proceedings that are pending against the Company or unasserted claims that may result in such proceedings, the Company evaluates the perceived merits of any legal proceedings or unasserted claims as well as the perceived merits of the amount of relief sought or expected to be sought therein.

 

 

 

 F-12 

 

 

If the assessment of a contingency indicates that it is probable that a material loss has been incurred and the amount of the liability can be estimated, then the estimated liability would be accrued in the Company’s consolidated financial statements. If the assessment indicates that a potential material loss contingency is not probable but is reasonably possible, or is probable but cannot be estimated, then the nature of the contingent liability, and an estimate of the range of possible losses, if determinable and material, would be disclosed.

 

Loss contingencies considered remote are generally not disclosed unless they involve guarantees, in which case the guarantees would be disclosed. Management does not believe, based upon information available at this time that these matters will have a material adverse effect on the Company’s financial position, results of operations or cash flows. However, there is no assurance that such matters will not materially and adversely affect the Company’s business, financial position, and results of operations or cash flows.

 

Income Tax Provision

 

The Company accounts for income taxes in accordance with ASC Topic 740, Income Taxes. ASC 740 requires a company to use the asset and liability method of accounting for income taxes, whereby deferred tax assets are recognized for deductible temporary differences, and deferred tax liabilities are recognized for taxable temporary differences. Temporary differences are the differences between the reported amounts of assets and liabilities and their tax bases. Deferred tax assets are reduced by a valuation allowance when, in the opinion of management, the Company does not foresee generating taxable income in the near future and utilizing its deferred tax asset, therefore, it is more likely than not that some portion, or all of, the deferred tax assets will not be realized. Deferred tax assets and liabilities are adjusted for the effects of changes in tax laws and rates on the date of enactment.

 

Under ASC 740, a tax position is recognized as a benefit only if it is “more likely than not” that the tax position would be sustained in a tax examination, with a tax examination being presumed to occur. The amount recognized is the largest amount of tax benefit that is greater than 50% likely of being realized on examination. For tax positions not meeting the “more likely than not” test, no tax benefit is recorded. The Company has no material uncertain tax positions for any of the reporting periods presented.

 

Income taxes are accounted for using the asset and liability method. Deferred income taxes are provided for temporary differences in recognizing certain income, expense and credit items for financial reporting purposes and tax reporting purposes. Such deferred income taxes primarily relate to the difference between the tax basis of assets and liabilities and their financial reporting amounts. Deferred tax assets and liabilities are measured by applying enacted statutory tax rates applicable to the future years in which deferred tax assets or liabilities are expected to be settled or realized. There was no material deferred tax asset or liabilities as of December 31, 2020 and 2019.

 

As of December 31, 2020 and 2019, the Company did not identify any material uncertain tax positions.

 

Basic and Diluted Net Income (Loss) Per Share

 

Net income (loss) per share is computed pursuant to ASC 260-10-45. Basic net income (loss) per share (“EPS”) is computed by dividing net income (loss) by the weighted average number of shares outstanding during the period.

 

Diluted EPS is computed by dividing net income (loss) by the weighted average number of shares of stock and potentially outstanding shares of stock during the period to reflect the potential dilution that could occur from common shares issuable through contingent shares issuance arrangement, stock options or warrants.

 

Due to the net loss incurred by the Company, potentially dilutive instruments would be anti-dilutive. Accordingly, diluted loss per share is the same as basic loss for all periods presented. The following potentially dilutive shares were excluded from the shares used to calculate diluted earnings per share as their inclusion would be anti-dilutive.

 

 

 

 F-13 

 

 

Year ended December 31,  2020   2019 
Stock options   210,000     
Total   210,000     

 

Subsequent Events

 

The Company follows the guidance in ASC 855-10-50 for the disclosure of subsequent events. The Company will evaluate subsequent events through the date when the financial statements were issued. Pursuant to ASU 2010-09, the Company as an SEC filer considers its financial statements issued when they are widely distributed to users, such as through filing them on EDGAR. Based upon the review, other than described in Note 17 – Subsequent Events, the Company did not identify any recognized or non-recognized subsequent events that would have required adjustment or disclosure in the consolidated financial statements.

 

Reclassification

 

Certain reclassifications have been made to the consolidated financial statements for prior years to the current year’s presentation. Such reclassifications have no effect on net income as previously reported.

 

Note 3 – Recent Accounting Pronouncement

 

Recently Adopted Accounting Standards

 

In February 2016, the Financial Accounting Standards Board (“FASB”) issued Accounting Standard Update (“ASU”) 2016-02, Leases (Topic 842) (“Topic 842”), which requires lessees to recognize leases on the balance sheet and disclose key information about leasing arrangements. Topic 842 was subsequently amended by ASU 2018-01, Land Easement Practical Expedient for Transition to Topic 842; ASU 2018-10, Codification Improvements to Topic 842, Leases; ASU 2018-11, Targeted Improvements; and ASU 2019-01, Codification Improvements. The new standard establishes a right-of-use model (“ROU”) that requires a lessee to recognize a ROU asset and lease liability on the balance sheet for all leases with a term longer than 12 months. Leases are classified as finance or operating, with classification affecting the pattern and classification of expense recognition in the statement of income.

 

The new standard was effective for the Company on January 1, 2019. A modified retrospective transition approach is required, applying the new standard to all leases existing at the date of initial application. An entity may choose to use either (1) its effective date or (2) the beginning of the earliest comparative period presented in the financial statements as its date of initial application. The Company adopted the new standard on January 1, 2019 and used the effective date as its date of initial application. Consequently, prior period financial information has not been recast and the disclosures required under the new standard have not been provided for dates and periods before January 1, 2019.

 

The new standard provides a number of optional practical expedients in transition. The Company elected the “package of practical expedients”, which permits it not to reassess under the new standard its prior conclusions about lease identification, lease classification and initial direct costs. The Company did not elect the use-of-hindsight or the practical expedient pertaining to land easements, the latter not being applicable to the Company. The new standard also provides practical expedients for an entity’s ongoing accounting. The Company elected the short-term lease recognition exemption for all leases that qualify. This means, for those leases that qualify, it has not recognized ROU assets or lease liabilities, and this includes not recognizing ROU assets or lease liabilities for existing short-term leases of those assets in transition. The Company also elected the practical expedient to not separate lease and non-lease components for all of its leases.

 

The Company believes the most significant effects of the adoption of this standard relate to (1) the recognition of new ROU assets and lease liabilities on its consolidated balance sheet for its office operating leases and (2) providing new disclosures about its leasing activities. There was no change in its leasing activities as a result of adoption.

 

 

 

 F-14 

 

 

In June 2018, the FASB issued ASU 2018-07, Stock Compensation (Topic 718): Improvements to Nonemployee Share-Based Payment Accounting, which simplifies the accounting for share-based payments granted to nonemployees for goods and services and aligns most of the guidance on such payments to nonemployees with the requirements for share-based payments granted to employees. ASU 2018-07 is effective on January 1, 2019. Early adoption is permitted. The adoption of this ASU did not have a material impact on the Company’s consolidated financial statements.

 

In June 2020, the FASB issued ASU 2020-05 in response to the ongoing impacts to US businesses in response to the COVID-19 pandemic. ASU 2020-05, Revenue from Contracts with Customers (Topic 606) and Leases (Topic 842) Effective Dates for Certain Entities provides a limited deferral of the effective dates for implementing previously issued ASU 606 and ASU 842 to give some relief to businesses and the difficulties they are facing during the pandemic. These entities may defer application to fiscal years beginning after December 15, 2019, and interim periods within fiscal years beginning after December 15, 2020. As the Company has already adopted ASU 606 and ASU 842, the Company does not anticipate any effect on its financial statements.

 

Recently Issued Accounting Standards Not Yet Adopted

 

In June 2016, FASB issued ASU 2016-13, Financial Instruments - Credit Losses, which changes the accounting for recognizing impairments of financial assets. Under the new guidance, credit losses for certain types of financial instruments will be estimated based on expected losses. The new guidance also modifies the impairment models for available-for-sale debt securities and for purchased financial assets with credit deterioration since their origination. In February 2020, the FASB issued ASU 2020-02, Financial Instruments-Credit Losses (Topic 326) and Leases (Topic 842) - Amendments to SEC Paragraphs Pursuant to SEC Staff Accounting Bulletin No. 119 and Update to SEC Section on Effective Date Related to Accounting Standards Update No. 2016-02, Leases (Topic 842), which amends the effective date of the original pronouncement for smaller reporting companies. ASU 2016-13 and its amendments will be effective for the Company for interim and annual periods in fiscal years beginning after December 15, 2022. The Company believes the adoption will modify the way the Company analyzes financial instruments, but it does not anticipate a material impact on results of operations. The Company is in the process of determining the effects the adoption will have on its consolidated financial statements.

 

In December 2019, FASB issued ASU 2019-12 "Income Taxes," which provides for certain updates to reduce complexity in the accounting for income taxes, including the utilization of the incremental approach for intra-period tax allocation, among others. The amendments in ASU 2019-12 are effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2020. The Company does not expect the implementation of ASU 2019-12 to have a material effect on its consolidated financial statements.

  

Management does not believe that any recently issued, but not yet effective, accounting standards could have a material effect on the accompanying financial statements. As new accounting pronouncements are issued, we will adopt those that are applicable under the circumstances.

 

Note 4 – Inventory, net

 

At December 31, 2020 and 2019, inventory consisted of the following:

 

   December 31,
2020
   December 31,
2019
 
Parts  $45,509   $31,458 
Finished goods   67,549    102,889 
Total   113,058    134,347 
Less inventory reserve   (70,562)   (71,414)
Inventory, net  $42,496   $62,933 

 

 

 

 F-15 

 

 

Note 5 – Deposits

 

Deposit balance as of December 31, 2020 amounted to $106,630, including $6,630 for lease agreement deposit and $100,000 for payment made into an escrow account. Balance as of December 31, 2019 amounted to $6,630 for lease agreement deposit.

 

On August 31, 2020, the Company executed a binding letter of intent with Communication Wiring Specialists, Inc., a California S-Corporation (“CWS”) whereby the Company will purchase one hundred percent (100%) of the issued and outstanding common stock of CWS for five million dollars ($5,000,000). When the transaction closes, CWS will be capitalized with one million dollars ($1,000,000). The purchase price structure includes a refundable deposit amount of $100,000 to be held in an escrow account upon execution of the letter of intent. This $100,000 is now nonrefundable. The Company is still currently negotiating the transaction and is expected to close before March 31, 2021.   

 

Note 6 – Acquisition

 

On March 15, 2019, the Company entered into and closed an asset purchase agreement with AVX Design & Integration, Inc. (“AVX”) as stated in Note 1. A summary of the purchase price and the purchase price allocations at fair value is below.

 

Purchase price    
Cash  $550,000 
29,286 shares of common stock (1)   290,716 
Secured promissory note   50,000 
Total purchase price  $890,716 
      
Allocation of purchase price     
Cash  $201,482 
Accounts receivable   234,561 
Inventories   16,000 
Property and equipment   10,381 
Operating lease right-of-use assets   157,213 
Deposits   5,968 
Intangible assets   57,000 
Goodwill   458,016 
Accounts payable and accrued liabilities   (81,478)
Operating lease liability   (168,427)
Purchase price  $890,716 

 

(1) – the fair value of the common stock was calculated based on the closing market price of the Company’s common stock at the date of acquisition.

  

 

 

 F-16 

 

 

Note 7 – Property and Equipment

 

At December 31, 2020 and 2019, property and equipment consisted of the following:

 

   December 31,
2020
   December 31,
2019
 
Warehouse  $3,789,773   $3,789,773 
Land   731,515    731,515 
Building Improvement   238,666    238,666 
Furniture and fixture   27,631    27,631 
Equipment   48,378    47,064 
Software   1,995    1,995 
Total cost   4,837,958    4,836,644 
Less accumulated depreciation   (345,448)   (183,206)
Property and equipment, net  $4,492,510   $4,653,438 

 

Depreciation expense for the years ended December 31, 2020 and 2019 amounted to $162,242 and $151,670, respectively.

 

The Company purchased a warehouse in Ontario, California in September 2018 and leased an unused portion to a third party. The tenant paid $12,335 as security deposit, shown as other liability in non-current liability.

 

On January 22, 2019, the Company subleased a portion of the unused warehouse and office space to a third party. The Company subleased 16,000 square feet of warehouse and 446 square feet of office space with base rent at $12,335 per month and $12,335 security deposit. The lease is for three years commencing February 15, 2019 and monthly rent to increase $0.02 per square foot each year.

 

On October 19, 2020, the Company subleased 3,000 feet of the warehouse and one office space for eight months commencing December 1, 2020 with option to extend the lease to twelve months. The monthly lease payment is $2,400 with a $4,800 security deposit.

 

Note 8 – Promissory Note - Related Party

 

On March 15, 2019, when the Company purchased AVX Design & Integration, Inc. the Company agreed to pay the predecessor owner with promissory note as one of the forms of consideration. The note was $50,000 with a fixed interest rate of 6% per annum payable in 12 equal monthly payments commencing on June 1st, 2019 with interest calculated from the initial payment date through the date in which all amount due under the note is paid off. As of December 31, 2019, the balance of the promissory note was $50,000 and $1,750 accrued interest incurred for the nine months and 15 days ended December 31, 2019. The note and interest amount of $50,000 and $1,831 were paid off on January 10, 2020.

 

Note 9 – Related Party Transactions

 

Revenue generated from Vitashower Corp., a company owned by the CEO’s wife, amounted to $26,449 and $14,184 for the years ended December 31, 2020 and 2019, respectively. There were no accounts receivable balance due from Vitashower Corp. as of December 31, 2020 and 2019, respectively. Purchases generated from Vitashower Corp. amounted to $11,371 and $0 for the years ended December 31, 2020 and 2019, respectively. There were accounts payable balance $11,371 and $0 to Vitashower Corp. as of December 31, 2020 and 2019, respectively.

 

 

 

 F-17 

 

 

Compensation payable to Chief Financial Officer amounted to $6,100 and $0 as of December 31, 2020 and 2019, respectively. Compensation for services provided by the Chief Financial Officer for the years ended December 31, 2020 and 2019 amounted to $22,100 and $29,000, respectively.

 

Compensation for services provided by the President and Chief Executive Officer for the years ended December 31, 2020 and 2019 amounted to $120,000 and $121,154, respectively.

 

Promissory note and interest accrued and payable to the previous owner of AVX amounted to $50,000 and $1,750, respectively, as of December 31, 2019. The note and interest amount of $50,000 and $1,831 were paid off on January 10, 2020.

 

Note 10 – Business Concentration and Risks

 

Major customers

 

One customer accounted for 0% and 18% of the total accounts receivable as of December 31, 2020 and 2019, respectively. This customer accounted for 53% and 43% of total revenue for the years ended December 31, 2020 and 2019, respectively.

  

Major vendors

 

One vendor accounted for 0% and 21% of total accounts payable at December 31, 2020 and 2019, respectively. This vendor accounted for 65% and 46% of the total purchases for the years ended December 31, 2020 and 2019, respectively.

 

Note 11 – Commitments and Contingencies

 

In the normal course of business or otherwise, the Company may become involved in legal proceedings. The Company will accrue a liability for such matters when it is probable that a liability has been incurred and the amount can be reasonable estimated. When only a range of possible loss can be established, the most probable amount in the range is accrued. The accrual for a litigation loss contingency might include, for example, estimates of potential damages, outside legal fees, and other directly related costs expected to be incurred.

 

Note 12 – Operating Lease Right-of-use Asset and Operating Lease Liability

 

Operating lease right-of-use assets and liabilities are recognized at the present value of the future lease payments at the lease commencement date. The interest rate used to determine the present value is our incremental borrowing rate, estimated to be 15%, as the interest rate implicit in our lease is not readily determinable. During the years ended December 31, 2020 and 2019, the Company recorded $65,180 and $62,322, respectively as operating lease expense.

 

The Company currently has a lease agreement for AVX’s operation for a monthly payment of $5,258 and shall increase by 3% every year. The lease commenced July 1, 2015 and expires on August 31, 2022. A security deposit of $5,968 was also held for the duration of the lease term.

 

In adopting ASC Topic 842, Leases (Topic 842), the Company has elected the ‘package of practical expedients’, which permit it not to reassess under the new standard its prior conclusions about lease identification, lease classification and initial direct costs. The Company did not elect the use-of-hindsight or the practical expedient pertaining to land easements; the latter is not applicable to the Company. In addition, the Company elected not to apply ASC Topic 842 to arrangements with lease terms of 12 months or less. On March 15, 2019 when AVX was acquired, upon adoption of ASC Topic 842, the Company recorded a right-of-use asset.

 

 

 

 F-18 

 

 

Right-of-use asset is summarized below:

 

   December 31, 2020   December 31, 2019 
Office lease  $157,213   $157,213 
Less: accumulated amortization   (70,655)   (28,814)
Right-of-use asset, net  $86,558   $128,399 

  

Operating Lease liability is summarized below:

 

   December 31, 2020   December 31, 2019 
Office lease  $94,671   $138,940 
Less: current portion   (53,384)   (44,270)
Long term portion  $41,287   $94,670 

 

Maturity of lease liability is as follows:

 

Year ending December 31, 2021  $64,048 
Year ending December 31, 2022   43,655 
Total future minimum lease payment   107,703 
Imputed interest   (13,032)
Lease Obligation, net  $94,671 

 

Note 13 – Loans

 

Paycheck protection program

 

On April 24, 2020, AVX Design & Integration, Inc. entered into an agreement to receive a U.S. Small Business Administration Loan (“SBA Loan”) from JPMorgan Chase Bank, N.A. related to the COVID-19 pandemic in the amount of $107,460, which we received on May 1, 2020. The SBA Loan has a fixed interest rate of 0.98 percent per annum and a maturity date two years from the date loan was issued.

 

On May 4, 2020, Perfecular Inc. entered into an agreement to receive a U.S. Small Business Administration Loan (“SBA Loan”) from Bank of America related to the COVID-19 pandemic in the amount of $151,500, which we received on May 4, 2020. The SBA Loan has a fixed interest rate of 1 percent per annum and a maturity date two years from the date loan was issued.

 

 

 

 F-19 

 

 

Economic Injury Disaster Loan

 

On June 4, 2020, Perfecular Inc. entered into an agreement to receive a U.S. Small Business Administration Loan (“SBA Loan”) from Bank of America related to the COVID-19 pandemic in the amount of $81,100, which we received on June 4, 2020. The SBA Loan has a fixed interest rate of 3.75 percent per annum and a maturity date thirty years from the date loan was issued.

 

On June 5, 2020, AVX Design & Integration, Inc. entered into an agreement to receive a U.S. Small Business Administration Loan (“SBA Loan”) from JPMorgan Chase Bank, N.A. related to the COVID-19 pandemic in the amount of $56,800, which we received on June 5, 2020. The SBA Loan has a fixed interest rate of 3.75 percent per annum and a maturity date thirty years from the date loan was issued.

 

Borrower will use all the proceeds of this Loan solely as working capital to alleviate economic injury caused by disaster occurring in the month of January 31, 2020 and continuing thereafter.

 

   December 31, 2020 
SBA Loan  $396,860 
Less: current portion   (194,125)
Long term portion  $202,735 

 

Interest expense incurred from the loans amounted to $4,746 for the year ended December 31, 2020.

 

Economic Injury Disaster Loan advance

 

In response to the Coronavirus (COVID-19) pandemic, small businesses, including agricultural businesses, and non-profit organizations in all U.S. states, Washington D.C., and territories can apply for an Economic Injury Disaster Loan (EIDL). The amount of the EIDL Advance was determined by the number of employees indicated on the EIDL application at $1,000 per employee, up to a maximum of $10,000. The EIDL Advance does not have to be repaid. Recipients did not have to be approved for an EIDL loan in order to receive the EIDL.

 

On April 21, 2020 and June 16, 2020, the Company received $9,000 and $10,000 EIDL advance and recorded the receipt as other income.

 

Note 14 – Stockholders’ Equity

 

Shares authorized

 

Upon formation, the total number of shares of all classes of stock that the Company is authorized to issue is seventy-five million (75,000,000) shares of common stock, par value $0.001 per share.

 

Common stock

 

As of December 31, 2019 and 2020 the Company had 40,959,741 shares of common stock issued and outstanding.

   

During the year ended December 31, 2020, the Company did not issue common stock.

 

 

 

 F-20 

 

 

Shares to be Issued for Compensation

 

The Company entered into agreements with third party consultants for financing and management consultation. The Company has incurred consulting service fees not paid in cash amounting to $48,000 for the year ended December 31, 2020, which the Company intends to issue stock as compensation for services rendered. Expenses incurred but not yet paid in shares as of December 31, 2020 and 2019 amounted to $98,709 and $50,709, respectively.

 

During the year ended December 31, 2019, the Company had the following transactions in its common stock:

  

  Issued 13,445 shares to consultants in exchange for professional services rendered. The shares were valued at $96,509 based on the closing price of the Company’s common stock on the dates that the shares were deemed earned, according to the agreements; and

 

  Issued 39,286 shares as consideration for the AVX acquisition valued at $290,716. The value of the common stock was determined based on the market price on the day of the closing of the acquisition.

 

Stock options

 

On August 6, 2019, each member of the Board was granted 30,000 options to purchase shares at $5.70 per share.

 

As of December 31, 2020, there were 210,000 options granted, 210,000 options vested, 0 options unvested, and 210,000 outstanding stock options.

 

The fair value of the warrants listed above was determined using the Black-Scholes option pricing model with the following assumptions:

 

   December 31,   December 31, 
   2020   2019 
Risk-free interest rate   1.71%    1.71% 
Expected life of the options   10 years    10 years 
Expected volatility   158.86%    158.86% 
Expected dividend yield   0%    0% 

 

The following is a summary of options activity from December 31, 2019 to December 31, 2020:

 

Options   Shares     Weighted average exercise price     Weighted Average Remaining Contractual Life     Aggregate Intrinsic Value  
Outstanding at December 31, 2019     210,000     $ 9.61       9.61        
   Granted                        
   Exercised                        
   Forfeited or expired                        
Outstanding at December 31, 2020     210,000     $ 9.61       9.61        
Vested as of December 31, 2020     210,000       5.70       9.61        
Exercisable at December 31, 2020     210,000     $ 9.61       9.61        

 

 

 

 F-21 

 

 

The exercise price for options outstanding and exercisable at December 31, 2020:

 

Outstanding   Exercisable 
              
 Number of    Exercise    Number of    Exercise 
 Options    Price    Options    Price 
 30,000   $5.70    30,000   $5.70 
 30,000    5.70    30,000    5.70 
 30,000    5.70    30,000    5.70 
 30,000    5.70    30,000    5.70 
 30,000    5.70    30,000    5.70 
 30,000    5.70    30,000    5.70 
 30,000    5.70    30,000    5.70 
 210,000         210,000      

 

Note 15 – Income taxes

 

Our effective tax rate differs from the statutory federal income tax rate, primarily as a result of the changes in valuation allowance, nondeductible permanent differences, credits, and state income taxes.

 

A reconciliation of the federal statutory income tax to our effective income tax is as follows:

  

    2020     2019  
             
Federal statutory rates   $ (532,794 )   $ (666,864 )
State income taxes     (224,281 )     (280,718 )
Permanent differences     57       154,332  
Valuation allowance against net deferred tax assets     757,018       793,250  
Effective rate   $     $  

 

The tax effect of temporary differences that give rise to a significant portion of the deferred tax assets and liabilities at December 31, 2020 and 2019 is presented below:

  

    2020     2019  
Deferred income tax asset                
Net operating loss carryforwards   $ 2,704,332     $ 1,947,748  
Interest     40,261       39,827  
Total deferred income tax asset     2,744,593       1,987,575  
Less: valuation allowance     (2,744,593 )     (1,987,575 )
Total deferred income tax asset   $     $  

 

 F-22 

 

 

The Company recognizes valuation allowances to reduce deferred tax assets to the amount that is more likely than not to be realized. The Company’s net deferred income tax asset is not more likely than not to be realized due to the lack of sufficient sources of future taxable income and cumulative losses that have resulted over the years. During the year ended December 31, 2020 the valuation allowance increased by $757,018.

 

As of December 31, 2020, we had cumulative net operating loss carryforwards for federal and state income tax purposes of $9,062,776, and available tax credit carryforwards of approximately $1,903,183 for federal income tax purposes, which can be carried forward to offset future taxable income. The federal net operating loss carryforwards consists of $6,527,307 of losses incurred prior to January 1, 2020 and which can be used to offset 100% of future taxable income and, $2,535,469 of losses incurred after January 1, 2020, which can be used to offset up to 80% of taxable income in subsequent years.

 

Note 16 – Segment reporting

 

The Company consists of two types of operations. Focus Universal, Inc. and Perfecular Inc. (“Focus”) involve wholesale, research and development of universal smart instrument and farming devices. AVX Design & Integration, Inc. (“AVX”) is an IoT installation and management company, specializes in high performance and easy to use Audio/Video, Home Theater, Lighting Control, Automation and Integration. The table below discloses income statement information by segment.

 

    Year ended December 31, 2020  
    Focus     AVX     Total  
                   
Revenue   $ 946,641     $ 705,877     $ 1,652,518  
Revenue - related party     26,449             26,449  
Total revenue     973,090       705,877       1,678,967  
                         
Cost of Revenue     728,597       666,590       1,395,187  
                         
Gross Profit     244,493       39,287       283,780  
                         
Operating Expenses:                        
Selling     13,650       8,940       22,590  
Compensation - officers     142,100             142,100  
Research and development     256,636             256,636  
Professional fees     1,291,729       5,431       1,297,160  
General and administrative     959,426       309,781       1,269,207  
Total Operating Expenses     2,663,541       324,152       2,987,693  
                         
Loss from Operations     (2,419,048 )     (284,865 )     (2,703,913 )
                         
Other Income (Expense):                        
Interest income (expense), net     (2,073 )     (1,999 )     (4,072 )
Interest (expense) – related party     (81 )           (81 )
Other income     154,194       16,759       170,953  
Total other income (expense)     152,040       14,760       166,800  
                         
Loss before income taxes     (2,267,008 )     (270,105 )     (2,537,113 )
                         
Tax expense                  
                         
Net Loss   $ (2,267,008 )   $ (270,105 )   $ (2,537,113 )

 

 F-23 

 

 

Note 17 – Subsequent Events

 

On January 8, 2021, Focus Universal Inc. entered into a secured promissory note agreement with East West Bank in the amount of $1,500,000. The note has a variable interest rate of 0.25% above Wall Street Journal Prime Rate. The final payment will be due on January 22, 2026.

 

On March 2, 2021, Perfecular Inc. entered into an agreement to receive a U.S. Small Business Administration Loan (“SBA Loan”) from Wells Fargo related to the COVID-19 pandemic in the amount of $158,547, which we received on March 3, 2021. The SBA Loan has a fixed interest rate of 1 percent per annum and a maturity date two years from the date loan was issued.

 

On March 10, 2021, AVX Design & Integration, Inc. entered into an agreement to receive an SBA Loan from Chase Bank related to the COVID-19 pandemic in the amount of $108,750. The SBA Loan has a fixed interest rate of 0.98 percent per annum and a maturity date five years from the date loan was issued.

 

 

On March 15, 2021, Focus Universal Inc. entered into a secured promissory note agreement with Golden Sunrise Investment LLC in the amount of $1,500,000. The note has an interest rate of 10% per year and has a due date of March 14, 2022. The note is subordinate in priority to the East West Bank loan entered into on January 8, 2021.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 F-24 

 

 

Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

 

None.

 

Item 9A. CONTROLS AND PROCEDURES

 

Evaluation of Disclosure Controls

 

Our Chief Executive Officer and Principal Financial Officer, after evaluating the effectiveness of our “disclosure controls and procedures” (as defined in the Securities Exchange Act of 1934 Rules 13a-15(e) and 15d-15(e)) as of the end of the period covered by this Annual Report on Form 10-K (the “Evaluation Date”), concluded that as of the Evaluation Date, our disclosure controls and procedures were not effective to provide reasonable assurance that information we are required to disclose in reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission rules and forms.

 

Changes in internal control over financial reporting.

 

There were no changes in our internal control over financial reporting during our most recent fiscal quarter that materially affected, or were reasonably likely to materially affect, our internal control over financial reporting.

 

Limitations on the Effectiveness of Internal Controls

 

Disclosure controls and procedures, no matter how well designed and implemented, can provide only reasonable assurance of achieving an entity’s disclosure objectives. The likelihood of achieving such objectives is affected by limitations inherent in disclosure controls and procedures. These include the fact that human judgment in decision-making can be faulty and that breakdowns in internal control can occur because of human failures such as simple errors or mistakes or intentional circumvention of the established process.

 

Management’s Report on Internal Control over Financial Reporting

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting; as such term is defined in the Securities Exchange Act of 1934 Rule 13a-15(f). Our management conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control - Integrated Framework, issued by the Committee of Sponsoring Organizations of the Treadway Commission (“1992 COSO Framework”).

 

A material weakness is a deficiency or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis.

 

Our management concluded we did not maintain effective controls over the Company’s financial reporting. The material weaknesses in our internal control over financial reporting, caused principally by inadequate staffing and technical expertise in key positions, resulted in overly relying on outside consultants to make numerous adjustments to our financial statements. Additionally, the significant deficiencies or material weaknesses could result in future material misstatement of the consolidated financial statements that would not be prevented or detected. Management has concluded that the identified control deficiency constitutes a material weakness.

 

 

 

 57 

 

 

This annual report does not include an attestation report of the Company’s independent registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by the Company’s independent registered public accounting firm pursuant to rules of the SEC that permit the company to provide only management’s report on internal control in this annual report.

  

Background and Remediation Plan

 

Management has determined that its processes and procedures over accounting and financial reporting are not adequate. As a result, the Company plans to implement a number of steps to remediate the material weakness discussed above and improve its internal control over financial reporting. Specifically, the following are planned: hiring additional qualified accounting personnel; reviewing all areas of the accounting process; strengthening controls and improving the reporting tools and quality of data used in the analysis of disclosures to review activities relevant to the financial reporting process.

 

Management believes that the measures described above should remediate the material weakness identified and strengthen the Company’s internal control over financial reporting. As the Company continues to evaluate and improve its internal control over financial reporting, additional measures to remediate the material weakness or modifications to certain of the remediation procedures described above may be necessary. The Company expects to complete the required remedial actions during 2020.

  

Item 9B. OTHER INFORMATION

 

None.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 58 

 

 

PART III

 

Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

 

The following table presents information with respect to our officers, directors and significant employees as of the date of this report:

 

Name Position
Dr. Edward Lee* Director and Chairman
Dr. Desheng Wang** Chief Executive Officer, Secretary, and Director
Duncan Lee*** Chief Financial Officer
Dr. Jennifer Gu* Director
Michael Pope**** Director (1)
Sheri Lofgren**** Director (1)
Carine Clark**** Director (1)
Greg Butterfield***** Director (1)

 

* Appointed director on October 21, 2015

** Appointed director on December 29, 2014

*** Appointed officer on April 2, 2018

**** Appointed director on June 8, 2018

***** Appointed director on November 28, 2018

(1) Independent director

 

Each director serves until our next annual meeting of the stockholders or unless they resign earlier and serves until his or her successor is elected and qualified. At the present time, members of the Board of Directors are not compensated with cash for their services to the board.

 

Each of our officers is elected by the Board of Directors to a term of one (1) year and serves until his or her successor is duly elected and qualified, or until he or she is removed from office.

 

Biographical Information Regarding Officers and Directors

 

Desheng Wang

 

Dr. Desheng Wang was appointed as Chief Executive Officer, Secretary, and has been a director since December 29, 2014. Dr. Wang has over 20 years of professional experience in mobile technology. Dr. Wang earned his bachelor’s degree from Hebei Normal University, Physics Department in 1985. In 1988, Dr. Wang earned his master’s degree from Dalian Institute of Chemical Physics at the Chinese Academy of Science. Dr. Wang earned his Ph.D. in Chemistry at Emory University in 1994. Dr. Wang served as a senior research fellow at California Institute of Technology from 1994-2011. Over the last five years, Dr. Wang has served as president of Vitashower Corporation and formerly as President of Perfecular Inc.

 

Edward Lee

 

Dr. Edward Lee was appointed President and director on October 21, 2015. On November 15, 2019, Dr. Lee resigned as President and was appointed as Chairman of the Board of Directors. Dr. Lee received his bachelor’s degree in Mathematics at Lanzhou University in 1983, received his master’s degree at University of Science and Technology of China in 1985 and earned his Ph.D. in Mathematics at University of Florida in 1991. Dr. Lee worked as an assistant professor at Tsinghua University in 1986 and National University of Singapore in 1992. Since 1996, Dr. Lee has served as CEO of AIDP, a leading supplier of dietary supplement ingredients, focusing on research & development and marketing and sales of proprietary ingredients like Magtein, KoACT, Predtic X, and Actizin. Dr. Lee is also serving as the Vice Chairperson of the American Chinese CEO Association. Dr. Lee is married to Jennifer Gu, a current director of Focus Universal.

 

 

 

 59 

 

 

Duncan Lee

 

Duncan Lee was appointed as CFO on April 2, 2018. Mr. Lee is presently a licensed Certified Public Accountant. Mr. Lee graduated in 2006 with a bachelor’s degree in Accounting from the University of Southern California and has more than 11 years of experience with public company accounting and financial reporting with the SEC. Mr. Lee worked on the audit staff of the PCAOB accounting firm of Moore Stephens Wurth Frazer and Torbet LLP and then worked as a senior associate at the PCAOB accounting firm of Simon & Edward, LLP in Diamond Bar, CA. Since 2011, Mr. Lee has worked in-house as a staff accountant at a public company called E-world USA Holding, Inc. preparing their routine securities filings, including their 10-K and 10-Q filings. In addition to working with E-World USA Holding, Inc., in the past five years, Mr. Lee has also worked as an outside consultant CPA for other public companies.

 

Jennifer Gu

 

Dr. Jennifer Gu was appointed as a director on October 21, 2015. Dr. Gu earned her bachelor’s degree in Biology from University of Florida in 1990 and earned her Ph.D. in Experimental Pathology at University of California, Los Angeles in 1997. She also completed post-doctoral research at the California Institute of Technology in 2004. Since 2005, Dr. Gu served, and is still currently serving, as the Vice President of Research & Development at AIDP. Dr. Gu is married to Edward Lee, the current Chairman of the Board of Directors of Focus Universal.

 

Michael Pope

 

Michael Pope was appointed as a director of the Company on June 8, 2018. Mr. Pope serves as the CEO and Chairman at Boxlight Corporation (Nasdaq: BOXL), a global provider of interactive technology solutions, where he has been an executive since July 2015 and director since September 2014. Mr. Pope has led Boxlight through nine acquisitions from 2016 to 2020, a Nasdaq IPO in November 2017, and over $100 million in debt and equity fundraising. He previously served as Managing Director at Vert Capital, a private equity and advisory firm from October 2011 to October 2016, managing portfolio holdings in the education, consumer products, technology and digital media sectors. Prior to joining Vert Capital, from May 2008 to October 2011, Mr. Pope was Chief Financial Officer and Chief Operating Officer for the Taylor Family in Salt Lake City, managing family investment holdings in consumer products, professional services, real estate and education. Mr. Pope also held positions including senior SEC reporting at Omniture (previously listed on Nasdaq and acquired by Adobe (Nasdaq: ADBE) in 2009) and Assurance Associate at Grant Thornton. Since January 2021, Mr. Pope has served as a member of the board of directors of Novo Integrated Sciences, Inc. (OTCQB: NVOS), a provider of multi-dimensional primary healthcare products and services. He holds an active CPA license and earned his undergraduate and graduate degrees in accounting from Brigham Young University.

 

Sheri Lofgren

 

Sheri Lofgren was appointed as an independent director of the Company on June 8, 2018. Ms. Lofgren has served as a financial consultant since March 2018. She served as Chief Financial Officer for Boxlight Corporation (Nasdaq: BOXL), a global education technology provider, from September 2014 to March 2018. She was Chief Financial Officer at Logical Choice Technologies, Inc., a distributor of interactive technologies to the education market, from 2005 to 2013. Ms. Lofgren is a Certified Public Accountant with extensive experience in financial accounting and management, operational improvement, budgeting and cost control, cash management and treasury, along with broad audit experience, internal control knowledge and internal and external reporting. She started her career with KPMG and then joined Tarica and Whittemore, an Atlanta based CPA firm, as an audit manager. Ms. Lofgren is a graduate of Georgia State University where she earned a B.A. in Business Administration – Accounting.

 

Greg Butterfield

 

Greg Butterfield was appointed as an independent director of the Company on November 28, 2018. Mr. Butterfield is the founder and Managing Partner of SageCreek Partners (“SCP”) a technology commercialization and consulting firm. Prior to starting SCP Mr. Butterfield served as the CEO of Vivint Solar, a leading full-service residential solar integrator. Before Vivint, Mr. Butterfield was the Group President for Symantec’s Server and Storage business units. Mr. Butterfield joined Symantec through the company’s acquisition of Altiris in April 2007. At Altiris, he served as chairman of the board, President, and CEO starting in February 2000. Mr. Butterfield is widely credited as the driving force behind eleven acquisitions and navigated the company through a successful IPO in 2002 in spite of a notable economic downturn in the technology sector. The IPO was followed in August of 2003 with a successful secondary offering. Mr. Butterfield was invited to the 2006 World Economic Forum as a Technology Pioneer. He was also the winner of the 2002 Ernst and Young Entrepreneur of the Year award and served as the chairman of the board of the Utah Information Technology Association from 2003 to 2005. Mr. Butterfield received a Bachelor of Science in Business Administration (finance emphasis) from Brigham Young University.

 

 

 

 60 

 

 

Carine Clark

 

Carine Clark was appointed as an independent director of the Company on June 8, 2018. Ms. Clark has served as president and CEO of four high-growth tech companies. In March 2019, Ms. Clark was appointed to the board of directors of Domo, Inc. (NASDAQGM: DOMO) and is currently serving as a member of Domo’s compensation committee. Since 2017 she has served as an Executive Board Member of the Utah Governor’s Office of Economic Development and Silicon Slopes, a non-profit helping Utah’s tech community thrive. Prior to that, Ms. Clark served from January 2015 to December 2016 as the President and CEO of MartizCX. From December 2012 to December 2016, Ms. Clark served as the President and CEO of Allegiance, Inc. Her reputation as a data-driven marketing executive at Novell for 14 years, Altiris for five years, and Symantec for more than 10 years. She has received numerous awards including the EY Entrepreneur of The Year® Award in the Utah Region and Utah Business Magazine’s CEO of the Year. Ms. Clark earned a bachelor’s degree in organizational communications and an MBA from Brigham Young University.

 

Corporate Governance

 

Our Board of Directors currently consists of seven members. Our Chairperson of the Board of Directors is Dr. Edward Lee. Dr. Edward Lee, Dr. Desheng Wang and Dr. Jennifer Gu are the three members of our Board of Directors who are not independent directors. Michael Pope, Sheri Lofgren, Greg Butterfield, and Carine Clark are four members of our Board of Directors who are independent directors.

 

Director Attendance at Meetings

 

Our Board of Directors conducts its business through meetings, both in person and telephonic, and by actions taken by written consent in lieu of meetings. During the year ended December 31, 2020, our Board of Directors held four meetings. All directors attended at least 75% of the meetings of our Board of Directors and of the committees of our Board of Directors on which they served during 2020.

 

Our Board of Directors encourages all directors to attend our annual meetings of stockholders unless it is not reasonably practicable for a director to do so.

 

Committees of our Board of Directors

 

Our Board of Directors has established and delegated certain responsibilities to its standing Audit Committee, Compensation Committee and Nominating and Corporate Governance Committee.

 

Audit Committee

 

We have a separately designated standing Audit Committee established in accordance with Section 3(a)(58)(A) of the Exchange Act. The Audit Committee’s primary duties and responsibilities include monitoring the integrity of our financial statements, monitoring the independence and performance of our external auditors, and monitoring our compliance with applicable legal and regulatory requirements. The functions of the Audit Committee also include reviewing periodically with our independent registered public accounting firm the performance of the services for which they are engaged, including reviewing the scope of the annual audit and its results, reviewing with management and the auditors the adequacy of our internal accounting controls, reviewing with management and the auditors the financial results prior to the filing of quarterly and annual reports, reviewing fees charged by our independent registered public accounting firm and reviewing any transactions between our Company and related parties. Our independent registered public accounting firm reports directly and is accountable solely to the Audit Committee. The Audit Committee has the sole authority to hire and fire the independent registered public accounting firm and is responsible for the oversight of the performance of their duties, including ensuring the independence of the independent registered public accounting firm. The Audit Committee also approves in advance the retention of, and all fees to be paid to, the independent registered public accounting firm. The rendering of any auditing services and all non-auditing services by the independent registered public accounting firm is subject to prior approval of the Audit Committee.

 

 

 

 61 

 

 

The Audit Committee operates under a written charter. The Audit Committee is required to be composed of directors who are independent under the rules of the SEC and the listing standards of the NASDAQ Stock Market LLC (“NASDAQ”).

 

The current members of the Audit Committee are directors Ms. Sheri Lofgren, the Chairperson of the Audit Committee, Mr. Michael Pope and Mr. Greg Butterfield, all of whom have been determined by the Board of Directors to be independent under the NASDAQ listing standards and rules adopted by the SEC applicable to audit committee members. The Board of Directors has determined that Mr. Sheri Lofgren qualifies as an “audit committee financial expert” under the rules adopted by the SEC and the Sarbanes Oxley Act. The Audit Committee met four times during 2020.

 

Compensation Committee

 

The primary duties and responsibilities of our standing Compensation Committee are to review, modify and approve the overall compensation policies for the Company, including the compensation of the Company’s Chief Executive Officer and other senior management; establish and assess the adequacy of director compensation; and approve the adoption, amendment and termination of the Company’s stock option plans, pension and profit-sharing plans, bonus plans and similar programs. The Compensation Committee may delegate to one or more officers the authority to make grants of options and restricted stock to eligible individuals other than officers and directors, subject to certain limitations. Additionally, the Compensation Committee has the authority to form subcommittees and to delegate authority to any such subcommittee. The Compensation Committee also has the authority, in its sole discretion, to select, retain and obtain, at the expense of the Company, advice and assistance from internal or external legal, accounting or other advisors and consultants. Moreover, the Compensation Committee has sole authority to retain and terminate any compensation consultant to assist in the evaluation of director, Chief Executive Officer or senior executive compensation, including sole authority to approve such consultant’s reasonable fees and other retention terms, all at the Company’s expense.

 

The Compensation Committee operates under a written charter. All members of the Compensation Committee must satisfy the independence requirements of NASDAQ applicable to compensation committee members.

 

The Compensation Committee currently consists of directors Ms. Carine Clark, Mr. Greg Butterfield, and Mr. Sheri Lofgren. Ms. Carine Clark is the Chairperson of the Compensation Committee. Each of the Compensation Committee members has been determined by the Board of Directors to be independent under NASDAQ listing standards applicable to compensation committee members. The Compensation Committee met four times during 2020.

 

Nominating and Corporate Governance Committee

 

The Nominating and Corporate Governance Committee identifies, reviews and evaluates candidates to serve on the Board; reviews and assesses the performance of the Board of Directors and the committees of the Board; and assesses the independence of our directors. The Nominating and Corporate Governance Committee is also responsible for reviewing the composition of the Board’s committees and making recommendations to the entire Board of Directors regarding the chairpersonship and membership of each committee. In addition, the Nominating and Corporate Governance Committee is responsible for developing corporate governance principles and periodically reviewing and assessing such principles, as well as periodically reviewing the Company’s policy statements to determine their adherence to the Company’s Code of Business Conduct and Ethics.

 

The Nominating and Corporate Governance Committee has adopted a charter that identifies the procedures whereby Board of Director candidates are identified primarily through suggestions made by directors, management and stockholders of the Company. We have implemented no material changes in the past year to the procedures by which stockholders may recommend nominees for the Board. The Nominating and Corporate Governance Committee will consider director nominees recommended by stockholders that are submitted in writing to the Company’s Corporate Secretary in a timely manner and which provide necessary biographical and business experience information regarding the nominee. The Nominating and Corporate Governance Committee does not intend to alter the manner in which it evaluates candidates, including the criteria considered by the Nominating Committee, based on whether or not the candidate was recommended by a stockholder. The Board of Directors does not prescribe any minimum qualifications for director candidates, and all candidates for director will be evaluated based on their qualifications, diversity, age, skill and such other factors as deemed appropriate by the Nominating and Corporate Governance Committee given the current needs of the Board of Directors, the committees of the Board of Directors and the Company. Although the Nominating and Corporate Governance Committee does not have a specific policy on diversity, it considers the criteria noted above in selecting nominees for directors, including members from diverse backgrounds who combine a broad spectrum of experience and expertise. Absent other factors which may be material to its evaluation of a candidate, the Nominating and Corporate Governance Committee expects to recommend to the Board of Directors for selection incumbent directors who express an interest in continuing to serve on the Board. Following its evaluation of a proposed director’s candidacy, the Nominating and Corporate Governance Committee will make a recommendation as to whether the Board of Directors should nominate the proposed director candidate for election by the stockholders of the Company.

 

 

 

 62 

 

 

The Nominating and Corporate Governance Committee operates under a written charter. No member of the Nominating and Corporate Governance Committee may be an employee of the Company, and each member must satisfy the independence requirements of NASDAQ and the SEC.

 

The Nominating and Corporate Governance Committee currently consists of directors Mr. Greg Butterfield, who is the Chairperson of the committee, Mr. Michael Pope and Ms. Carine Clark. Each of the members of the Nominating and Corporate Governance Committee has been determined by the Board of Directors to be independent under NASDAQ listing standards. The Nominating and Corporate Governance Committee met four times in 2020.

 

Oversight of Risk Management

 

Risk is inherent with every business, and how well a business manages risk can ultimately determine its success. We face a number of risks, including economic risks, financial risks, legal and regulatory risks and others, such as the impact of competition. Management is responsible for the day-to-day management of the risks that we face, while our Board, as a whole and through its committees, has responsibility for the oversight of risk management. In its risk oversight role, our Board of Directors is responsible for satisfying itself that the risk management processes designed and implemented by management are adequate and functioning as designed. Our Board of Directors assesses major risks facing our Company and options for their mitigation in order to promote our stockholders’ interests in the long-term health of our Company and our overall success and financial strength. A fundamental part of risk management is not only understanding the risks a company faces and what steps management is taking to manage those risks, but also understanding what level of risk is appropriate for us. The involvement of our full Board of Directors in the risk oversight process allows our Board of Directors to assess management’s appetite for risk and also determine what constitutes an appropriate level of risk for our Company. Our Board of Directors regularly includes agenda items at its meetings relating to its risk oversight role and meets with various members of management on a range of topics, including corporate governance and regulatory obligations, operations and significant transactions, risk management, insurance, pending and threatened litigation and significant commercial disputes.

 

While our Board of Directors is ultimately responsible for risk oversight, various committees of our Board of Directors oversee risk management in their respective areas and regularly report on their activities to our entire Board of Directors. In particular, the Audit Committee has the primary responsibility for the oversight of financial risks facing our Company. The Audit Committee’s charter provides that it will discuss our major financial risk exposures and the steps we have taken to monitor and control such exposures. Our Board of Directors has also delegated primary responsibility for the oversight of all executive compensation and our employee benefit programs to the Compensation Committee. The Compensation Committee strives to create incentives that encourage a level of risk-taking behavior consistent with our business strategy.

 

We believe the division of risk management responsibilities described above is an effective approach for addressing the risks facing our Company and that our Board’s leadership structure provides appropriate checks and balances against undue risk taking.

 

Code of Business Conduct and Ethics

 

Our Board of Directors has adopted a code of ethical conduct that applies to our principal executive officer, principal financial officer and senior financial management. This code of ethical conduct is embodied within our Code of Business Conduct and Ethics, which applies to all persons associated with our Company, including our directors, officers and employees (including our principal executive officer, principal financial officer, principal accounting officer and controller). In order to satisfy our disclosure requirements under Item 5.05 of Form 8-K, we will disclose amendments to, or waivers of, certain provisions of our Code of Business Conduct and Ethics relating to our chief executive officer, chief financial officer, chief accounting officer, controller or persons performing similar functions on our website promptly following the adoption of any such amendment or waiver. The Code of Business Conduct and Ethics provides that any waivers of, or changes to, the code that apply to the Company’s executive officers or directors may be made only by the Audit Committee. In addition, the Code of Business Conduct and Ethics includes updated procedures for non-executive officer employees to seek waivers of the code.

 

 

 

 63 

 

 

Director Independence

 

Our Company is governed by our Board. Currently, each member of our Board, other than Mr. Edward Lee, Mr. Desheng Wang, and Ms. Jennifer Gu, is an independent director; and all standing committees of our Board of Directors are composed entirely of independent directors, in each case under NASDAQ’s independence definition applicable to boards of directors. For a director to be considered independent, our Board of Directors must determine that the director has no relationship which, in the opinion of our Board, would interfere with the exercise of independent judgment in carrying out the responsibilities of a director. Members of the Audit Committee also must satisfy a separate SEC independence requirement, which provides that they may not accept directly or indirectly any consulting, advisory or other compensatory fee from us or any of our subsidiaries other than their directors’ compensation. In addition, under SEC rules, an Audit Committee member who is an affiliate of the issuer (other than through service as a director) cannot be deemed to be independent. In determining the independence of members of the Compensation Committee, NASDAQ listing standards require our Board of Directors to consider certain factors, including, but not limited to: (1) the source of compensation of the director, including any consulting, advisory or other compensatory fee paid by us to the director, and (2) whether the director is affiliated with us, one of our subsidiaries or an affiliate of one of our subsidiaries. Under our Compensation Committee Charter, members of the Compensation Committee also must qualify as “outside directors” for purposes of Section 162(m) of the Internal Revenue Code of 1986, as amended (the “Code”), and as “non-employee directors” for purposes of Rule 16b-3 under the Exchange Act. The independent members of the Board of Directors are Michael Pope, Sheri Lofgren, Greg Butterfield, and Carine Clark.

 

Item 11: EXECUTIVE COMPENSATION

 

Compensation of Officers 

 

The following summary compensation table sets forth information concerning compensation for services rendered in all capacities during 2020, and 2019 awarded to, earned by or paid to our executive officers.

 

Summary Compensation Table

(a)  (b)   (c)   (d)   (e)   (f)   (g)   (h)   (i)   (j) 
Name and Principal      Salary   Bonus   Stock Awards   Option Awards   Non-Equity Incentive Plan Compensation   Change in Pension Value & Non-qualified Deferred Compensation Earnings   All Other
Compensation
   Totals 
Position  Year   ($)*   ($)   ($)   ($)   (S)   ($)   ($)   ($) 
Edward Lee   2020    0    0    0    0    0    0    0    0 
President and Director   2019    0    0    0    0    0    0    0    0 
                                              
Desheng Wang   2020    120,000    0    0    0    0    0    0    120,000 
CEO, Secretary and Director   2019    121,154    0    0    0    0    0    0    121,154 
                                              
Duncan Lee   2020    22,100    0    0    0    0    0    0    22,100 
Chief Financial Officer   2019    29,000    0    0    0    0    0    0    29,000 

  

 

 

 64 

 

 

Narrative Disclosure Requirement for Summary Compensation Table

 

Compensation

 

Edward Lee did not receive compensation for service provided as President in 2019 (a position he resigned from on November 15, 2019). Dr. Wang entered into an employment agreement with the Company whereby the Company agreed to pay Dr. Wang a salary of $121,154 per year, payable monthly, for his services as Chief Executive Officer, effective as of November 1, 2018. We have not provided our other named executive officers with perquisites or other personal benefits. As of the date of this prospectus, no other officer or director has formally entered into any compensation arrangement for services provided under consulting agreements or employment agreements. Duncan Lee was hired in April 2018. In 2019, Duncan Lee received $29,000 in compensation in 2019  and 22,100 in 2020.

  

Retirement, Resignation or Termination Plans

 

We sponsor no plan, whether written or verbal, that would provide compensation or benefits of any type to an executive upon retirement, or any plan that would provide payment for retirement, resignation, or termination as a result of a change in control of our company or as a result of a change in the responsibilities of an executive following a change in control of our company.

 

Directors’ Compensation

 

The persons who served as affiliated members of our Board of Directors, including executive officers, did not receive any compensation for services as directors in 2019 or 2020. As of the date of this prospectus, no director has formally entered into any compensation arrangement for services provided under consulting agreements or employment agreements.

 

As of the date of this annual report, all directors have been issued 45,000 options per person pursuant to our 2018 Stock Option Plan and such options will vest over a period of one year. In 2019 and 2020, all independent directors were paid $20,000 cash, except for Sheri Lofgren, who received $25,000 for serving as the chair of the audit committee. Additionally, a company affiliated with Mr. Pope received $153,964 for advisory services in 2019, which included $82,000 in cash and $71,964 in stock and $120,000 for advisory services in 2020, which included $72,000 in cash and $48,000 in stock.

 

Option Exercises and Stock Vested

 

Previously, we did not have a stock option plan in place; therefore, there were no options issued, outstanding, exercised, or stock issued or vested as compensation during the years ended December 31, 2020 and 2019. On December 17, 2018, the Company adopted the 2018 Stock Option Plan (the “2018 Stock Option Plan”) whereby the Company reserved for issuance 1,000,000 shares of common stock and agreed that such shares shall, when issued and paid for in accordance with the provisions of the 2018 Stock Option Plan, constitute validly issued, fully paid and non-assessable shares of common stock.

  

Pension Benefits and Nonqualified Deferred Compensation

 

The Company does not maintain any qualified retirement plans or non-nonqualified deferred compensation plans for its employees or directors.

 

Executive Officer Outstanding Equity Awards at Fiscal Year-End

 

The following table provides certain information concerning any common share purchase options, stock awards or equity incentive plan awards held by each of our named executive officers that were outstanding as of December 31, 2020.

 

 

 

 65 

 

 

Option Awards     Stock Awards  
     

Number of

Securities

Underlying

Unexercised

Options (#)

   

Number of

Securities

Underlying

Unexercised

Options (#)

   

Equity

Incentive Plan

Awards:

Number of

Securities

Underlying

Unexercised

Unearned

     

Option

Exercise

   

Option

Expiration

   

Number of

Shares or

Units of

Stock That

Have Not

Vested

     

Market

Value of

Shares or

Units of

Stock That

Have Not

   

Equity

Incentive

Plan

Awards:

Number

of

Unearned

Shares,

Units or

Other

Rights

That Have

Not

     

Equity

Incentive Plan

Awards:

Market or

Payout Value of

Unearned

Shares, Units or

Other Rights

That Have Not

 
Name     Exercisable     Unexercisable     Options (#)       Price ($)     Date     (#)       Vested     Vested       Vested  
Edward Lee - Chairman     30,000          –     $ 5.70     August 6, 2029                      
Desheng Wang - CEO, Secretary     30,000             $ 5.70     August 6, 2029                      
Duncan Lee - CFO                                            
Jennifer Gu     30,000               $ 5.70     August 6, 2029                      
Michael Pope     30,000             $ 5.70     August 6, 2029                      
Carine Clark     30,000             $ 5.70     August 6, 2029                      
Sheri Lofgren     30,000             $ 5.70     August 6, 2029                      
Greg Butterfield     30,000             $ 5.70     August 6, 2029                      

 

 

 

 

 66 

 

 

Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

The following table sets forth certain information regarding beneficial ownership of our common stock as of December 31, 2020: (i) by each of our directors, (ii) by each of the Named Executive Officers, (iii) by all of our executive officers and directors as a group, and (iv) by each person or entity known by us to beneficially own more than five percent (5%) of any class of our outstanding shares. As of December 31, 2020, there were 40,959,741 shares of our common stock outstanding:

 

Title of Class     Name of Beneficial Owner  

Amount and
Nature
of Beneficial
Ownership

(1)

   

Percentage of
Beneficial
Ownership

%

 
                   
Common     Desheng Wang, CEO, and Director     14,392,400       35.137  
                       
Common     Edward Lee, Chairman and Director jointly with Jennifer Gu, Director     8,359,000       20.407  
                       
Common     Yan Chen     3,000,000       7.324  
                       
Common     Michael Pope     49,032 (2)     *  
                       
Common     Duncan Lee     1,400       *  

 

(1) Applicable percentage of ownership is based on 40,959,741 shares of common stock outstanding on December 31, 2020.

 

(2) Share held by company affiliated with Mr. Pope

 

Percentage ownership is determined based on shares owned together with securities exercisable or convertible into shares of common stock within 60 days of December 31, 2020, for each stockholder. Beneficial ownership is determined in accordance with the rules of the SEC and generally includes voting or investment power with respect to securities. Shares of common stock subject to securities exercisable or convertible into shares of common stock that are currently exercisable or exercisable within 60 days of December 31, 2020, are deemed to be beneficially owned by the person holding such securities for the purpose of computing the percentage of ownership of such person, but are not treated as outstanding for the purpose of computing the percentage ownership of any other person. Our common stock is our only issued and outstanding class of securities eligible to vote.

 

As of December 31, 2020, there were 22,842,832 shares of common stock outstanding owned by our officers and directors. 

  

 

 

 

 

 

 

 

 

 

 67 

 

 

Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

Consulting services provided by the President, Chief Executive Officer, Secretary and Treasurer and Chief Financial Officer for the years ended December 31, 2020 and 2019 were as follows:

 

  

For the
Year

Ended

December 31,

2020

  

For the
Year

Ended

December 31,
2019

 
         
President  $0   $0 
Chief Executive Officer, Secretary and Treasurer   120,000    121,154 
Chief Financial Officer   22,100    29,000 
   $142,100   $150,154 

 

Advances to (from) related party

 

Revenue generated from Vitashower Corp., a company owned by the CEO’s wife, amounted to $26,449 and $14,184 for the years ended December 31, 2020 and 2019, respectively. Account receivable balance due from Vitashower Corp. amounted to $0 and $39,625 as of December 31, 2019 and 2018, respectively. Purchases generated from Vitashower Corp. amounted to $11,371 and $0 for the years ended December 31, 2020 and 2019, Respectively. There were accounts payable balance $11,371 and $0 to Vitashower Corp. as of December 31, 2020 and 2019, respectively.

 

Delinquent Section 16(a) Beneficial Ownership Report

 

Section 16(a) of the Exchange Act requires our directors, executive officers and persons who beneficially own more than ten percent (10%) of a registered class of our equity securities to file reports of ownership and changes in ownership of our common stock and other equity securities with the SEC on a timely basis. The Company believes, based solely on a review of Section 16 reports filed with the SEC and representations by the Company’s reporting persons that no other reports were required during the year ended December 31, 2019, that all Section 16(a) filing requirements applicable to our executive officers, directors and greater than ten percent (10%)_beneficial owners were timely filed during 2019 other than as follows: on September 12, 2019, a late Form 3 was filed for each of Mr. Butterfield, Ms. Clark, Ms. Gu, Mr. Lee, Mr. Pope, Mr. Wang and Mr. Lee to report their status as an executive officer, director and/or ten percent (10%) beneficial owner; on September 12, 2019, Mr. Wang, filed a late Form 5 report for the year 2015 to report the common stock exchange on December 30, 2015 pursuant to the Perfecular Inc. merger; on September 12, 2019, Mr. Wang, filed a late Form 5 report for the year 2018 to report his three purchases of Common Stock on July 5, 2018, July 10, 2018 and July 12, 2018; on September 12, 2019, Mr. Lee filed a late Form 5 for the year 2018 to report his purchase of Common Stock on June 29, 2018; and on September 13, 2019, a late Form 3 was filed for Ms. Lofgren to report her appointment as an independent director on June 8, 2018;

 

On February 7, 2020, Mr. Wang amended a Form 5 originally filed on September 12, 2019 for the year 2015 to report his five purchases of Common Stock on March 31, 2015, June 12, 2015 and December 30, 2015. On February 7, 2020, Mr. Wang amended a Form 5 originally filed on September 12, 2019 for the year 2018 to report two separate transactions on July 12, 2018 instead of one transaction for the same number of shares of Common Stock on that date. On February 7, 2020, Mr. Wang filed a late Form 5 for the year 2017 reporting his two purchases of Common Stock on September 28, 2017 and October 18, 2017.

 

To the best of the Company’s knowledge, the rest of the Company’s Section 16 reports have been filed as of the date of this annual report.

 

 

 

 68 

 

 

Director Independence

 

A director is not considered to be independent if he or she is also an executive officer or employee of the corporation. Our director, Edward Lee, is also our Chairman; our director Desheng Wang is also our Chief Executive Officer. The rest of our directors are considered to be independent directors

  

Item 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

 

During the year ended March 31, 2015, 2014, and the period from December 4, 2012 (Inception) to March 31, 2013, we engaged Cutler & Co, LLC, as our independent auditor. On October 20, 2015, we changed our independent auditor to DYH & Company. On April 16, 2017, we changed our independent auditor to BF Borgers CPA PC. For the years ended December 31, 2020 and 2019, we incurred fees as discussed below:

 

    Year ended
December 31,
2020
    Year ended
December 31,
2019
 
             
Audit fees     $ 106,598     $ 91,460  
Audit – related fees     $ Nil     $ Nil  
Tax fees     $ Nil     $ Nil  
All other fees     $ Nil     $ Nil  

 

Audit fees consist of fees related to professional services rendered in connection with the audit of our annual financial statements and review of our quarterly financial statements. Tax fees represent fees related to preparation of our corporation income tax returns. Our policy is to pre-approve all audit and permissible non-audit services performed by the independent accountants. These services may include audit services, audit-related services, tax services and other services.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 69 

 

 

PART IV

 

Item 15. EXHIBITS

 

EXHIBIT NUMBER   DESCRIPTION
3.1   Articles of Incorporation. Incorporated by reference to the Company’s Registration Statement on Form S-1 filed with the SEC on December 26, 2013.
3.2   Amended and Restated Bylaws, as filed with the SEC on October 22, 2019.
4.2   Subscription Agreement. Incorporated by reference to the Company’s Registration Statement on Form S-1 filed with the SEC on December 26, 2013.
10.1   Form of Stock Purchase Agreement, as filed with the SEC on March 18, 2019.
10.2   Form of Secured Promissory Note, as filed with the SEC on March 18, 2019.
10.3   Form of Stock Pledge Agreement, as filed with the SEC on March 18, 2019.
10.4   Form of Subscription Agreement, as filed with the SEC on March 18, 2019.
10.5   Form of Consulting Agreement, as filed with the SEC on March 18, 2019.
10.7   2018 Equity Incentive Plan, as filed with the SEC on December 28, 2018.
10.8   Promissory Note with Chase Bank, dated March 10, 2021 for $108,750 SBA Loan.*
10.9   Secured Promissory Note with East West Bank, dated January 8, 2021 for $1,500,000.*
10.10   Loan Agreement with Golden Sunrise Investment LLC, dated March 15, 2021 for $1,500,000.*
10.11   Company Guarantee Agreement with Golden Sunrise Investment LLC dated March 15, 2021.*
10.12   Secured Promissory Note with Golden Sunrise Investment LLC dated March 15, 2021 for $1,500,000.*
31.1   Certification of the Chief Executive Officer pursuant to Rules 13a-14(a) and 15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.*
31.2   Certification of the Chief Financial Officer pursuant to Rules 13a-14(a) and 15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.*
32.1   Certification of the Chief Executive Officer pursuant to 18 U.S.C Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.*
32.2   Certification of the Chief Financial Officer pursuant to 18 U.S.C Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.*
101.INS   XBRL Instance Document **
101.SCH   XBRL Taxonomy Extension Schema Document **
101.CAL   XBRL Taxonomy Extension Calculation Linkbase Document **
101.DEF   XBRL Taxonomy Extension Definition Linkbase Document **
101.LAB   XBRL Taxonomy Extension Label Linkbase Document **
101.PRE   XBRL Taxonomy Extension Presentation Linkbase Document **

 

* Filed herewith.

 

** XBRL (Extensible Business Reporting Language) information is furnished and not filed or a part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933, as amended, is deemed not filed for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, and otherwise is not subject to liability under these sections.

 

Item 16. FORM 10-K SUMMARY

 

None.

 

 

 

 

 70 

 

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

Date: March 23, 2021

 

  FOCUS UNIVERSAL INC.
     
  By: /s/  Desheng Wang
    Desheng Wang
    Chief Executive Officer, Secretary, and Director

 

In accordance with the Exchange Act, this report has been signed below by the following persons on behalf of Focus Universal Inc. and in the capacities and on the dates indicated.

 

SIGNATURES   TITLE   DATE
         
/s/ Desheng Wang   Chief Executive Officer, Secretary and Director   March 23, 2021
Desheng Wang        
         

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 71