Table of Contents

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-Q

 

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934

 

For the Quarterly period ended June 30, 2018

 

o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934

 

Commission File No. 000-55247

 

FOCUS UNIVERSAL INC.

(Exact Name of Small Business Issuer as specified in its charter)

 

Nevada 46-3355876
(State or other jurisdiction (IRS Employer File Number)
of incorporation)  
   
20511 East Walnut Drive North, Walnut, CA 91789
(Address of principal executive offices) (zip code)

 

(626) 272-3883

(Registrant's telephone number, including area code)

 

Indicate by check mark whether the registrant: (1) filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the past 12 months (or for such shorter period that the registrant was required to file such reports); and (2) has been subject to such filing requirements for the past 90 days.    Yes  x  No o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (Section 232.405 of this chapter) during the preceding 12 months (or such shorter period that the registrant was required to submit and post such files. Yes o  No  x

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company”, and “emerging growth company” in Rule 12b-2 of the Exchange Act. (Check one

 

Large accelerated filer o   Accelerated filer o
Non-accelerated filer  o (Do not check if a smaller reporting company)   Smaller reporting company  x
Emerging growth company  x  

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act) Yes o    No x

 

As of August 7, 2018, registrant had outstanding 40,907,010 shares of the registrant's common stock at a par value of $0.001 per share.

 

 

 

   
 

 

FORM 10-Q

 

FOCUS UNIVERSAL INC.

 

TABLE OF CONTENTS

 

PART I FINANCIAL INFORMATION 3
   
Item 1. Unaudited Consolidated Financial Statements 3
   
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations 4
   
Item 3. Quantitative and Qualitative Disclosures About Market Risk 13
   
Item 4. Controls and Procedures 13
   
PART II OTHER INFORMATION 14
   
Item 1. Legal Proceedings 14
   
Item 1A. Risk Factors 14
   
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds 14
   
Item 3. Defaults Upon Senior Securities 15
   
Item 4. Mine Safety Disclosures 15
   
Item 5. Other Information 15
   
Item 6. Exhibits 16
   
Signatures 17

 

 

 

 

 2 
 

 

PART I FINANCIAL INFORMATION

 

References in this document to "us," "we," or "Company" refer to FOCUS UNIVERSAL INC.

 

ITEM 1. FINANCIAL STATEMENTS

 

FOCUS UNIVERSAL INC. AND SUBSIDIARY

CONSOLIDATED FINANCIAL STATEMENTS

 

Index to the Financial Statements

 

Contents Page
   
Consolidated Balance Sheets as of June 30, 2018 (Unaudited) and December 31, 2017 F-1
   
Consolidated Statements of Operations (Unaudited) for the Six Months Ended June 30, 2018 and 2017 F-2
   
Consolidated Statements of Cash Flows (Unaudited) for the Six Months Ended June 30, 2018 and 2017 F-3
   
Notes to the Unaudited Consolidated Financial Statements F-4

 

 

 

 

 

 

 

 3 
 

 

FOCUS UNIVERSAL INC. AND SUBSIDIARY

CONDENSED CONSOLIDATED BALANCE SHEETS

 

   June 30,   December 31, 
   2018   2017 
   (unaudited)     
ASSETS          
CURRENT ASSETS          
Cash and cash equivalents  $3,721,226   $394,398 
Accounts receivable       26,311 
Accounts receivable - related party   19,200    564 
Inventories, net   66,309    47,432 
Prepaid expenses   1,667    8,280 
Total Current Assets   3,808,402    476,985 
           
Property and equipment, net   5,246    6,336 
           
Other assets:          
Deposits   7,210    7,210 
           
Total assets:  $3,820,858   $490,531 
           
LIABILITIES AND STOCKHOLDERS’ EQUITY (DEFICIT)          
Current Liabilities:          
Accounts payable and accrued liabilities  $270,711   $449,256 
Customer deposit   60,019    31,734 
Loan from Stockholders   50,000     
Income taxes payable       800 
Total Current Liabilities   380,730    481,790 
Non-current Liabilities          
Convertible promissory note, net       81,342 
           
Total Liabilities   380,730    563,132 
           
Stockholders' Equity (Deficit):        
Common stock, par value $0.001 per share, 75,000,000 shares authorized; 40,644,319 shares issued and outstanding as of June 30, 2018 and 34,574,706 shares issued and outstanding as of December 31, 2017, respectively   40,644    34,575 
Additional paid-in capital   12,487,372    1,871,618 
Subscriptions receivable    (6,267,360)    
Shares to be issued, common share   457,377     
Accumulated deficit   (3,277,905)   (1,978,794)
Total stockholders' equity (deficit)   3,440,128    (72,601)
           
Total Liabilities and Stockholders' Equity (Deficit)  $3,820,858   $490,531 

 

 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements

 

 

 F-1 
 

 

FOCUS UNIVERSAL INC. AND SUBSIDIARY

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(unaudited)

 

   Three Months   Three Months   Six Months   Six Months 
   Ended   Ended   Ended   Ended 
   June 30,   June 30,   June 30,   June 30, 
   2018   2017   2018   2017 
       (Restated)       (Restated) 
                 
Revenue  $36,580   $625,068   $97,757   $891,513 
Revenue - related party   3,200    3,563    10,575    6,571 
Total revenue   39,780    628,631    108,332    898,084 
                     
Cost of Revenue   9,761    544,898    27,685    752,496 
                     
Gross Profit   30,019    83,733    80,647    145,588 
                     
Operation Expenses:                    
Compensation - officers   30,000    30,000    60,000    60,000 
Research and development   56,771    55,453    107,789    109,929 
Professional fees   513,736    41,797    563,897    69,778 
General and administrative   135,874    60,673    205,037    123,582 
Total Operating Expenses   736,381    187,923    936,723    363,289 
                     
Loss from Operations   (706,362)   (104,190)   (856,076)   (217,701)
                     
Other Income (Expense)                    
Interest expense, net   (388,901)   20    (443,020)   53 
Other income               4,763 
Total other expense   (388,901)   20    (443,020)   4,816 
                     
Loss before income taxes   (1,095,263)   (104,170)   (1,299,096)   (212,885)
                     
Tax expense   15    800    15    800 
                     
Net Loss  $(1,095,278)  $(104,970)  $(1,299,111)  $(213,685)
                     
Weight Average Number of Common Shares Outstanding - Basic and Diluted   34,641,405    34,574,706    34,417,219    34,574,706 
                     
Net Loss per common share                    
Basic and diluted  $(0.03)  $   $(0.04)  $(0.01)

 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements 

 

 F-2 
 

 

FOCUS UNIVERSAL INC. AND SUBSIDIARY

CONSOLIDATED STATEMENTS OF CASH FLOWS

FOR THE SIX MONTHS ENDED JUNE 30, 2018 AND 2017

(unaudited)

 

   2018   2017 
Cash flows from operating activities:          
Net Loss  $(1,299,111)  $(213,685)
Adjustments to reconcile net loss to net cash used in operating activities:          
Inventory reserve   39,089     
Depreciation expense   1,090    914 
Amortization of debt discount   336,713     
Stock base compensation   457,377     
Changes in Operating Assets and Liabilities:          
Accounts receivable   26,311    14,043 
Accounts receivable - related party   (18,636)    
Inventories   (57,966)   20,179 
Prepaid expenses   6,613    636 
Deposits       13,116 
Accounts payable and accrued liabilities   (47,649)   9,743 
Customer deposit   28,285    47,145 
Income taxes payable   (800)   (800)
Deferred rent       (468)
Net cash flows used in operating activities   (528,684)   (109,177)
           
Cash flows from financing activities:          
Proceeds from convertible note payable       420,000 
Repayment of convertible notes   (548,949)    
Shares issued for convertible notes   548,949      
Proceeds from shareholders loan   50,000     
Proceeds from sale of common stock   3,805,488     
Net cash flows provided by financing activities   3,855,512    420,000 
           
Net Change in Cash and Cash Equivalents   3,326,828    310,823 
           
Cash and cash equivalents - Beginning of Period   394,398    340,073 
           
Cash and cash equivalents - End of Period  $3,721,226   $650,896 
           
Supplemental non-cash financing activities          
Shares issued to reduce notes payable   313,700     
           
Supplemental Disclosures for Statement of Cash Flows:        
Interest paid  $   $ 
Income tax paid  $15   $800 

 

 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements

 

 F-3 
 

 

FOCUS UNIVERSAL INC. AND SUBSIDIARY

NOTES TO THE CONDENSED UNAUDITED CONSOLIDATED FINANCIAL STATEMENTS

(unaudited)

 

Note 1 – Organization and Operations

 

Focus Universal Inc. (the “Company”) was incorporated under the laws of the State of Nevada on December 4, 2012 (“Inception”). We are a universal smart instrument developer and manufacturer, headquartered in the Los Angeles, California metropolitan area, specializing in the development and commercialization of the novel and proprietary universal smart technologies and instruments. Universal smart technology is an innovative, commercial, off-the-shelf technology with an innovative soft hardware integrated platform. Our platform provides a unique and universal wireless solution for embedded design, industrial control, test and measurement. Our smart technology software utilizes a smartphone, computer, or a mobile device as a platform and display that communicates and works in tandem with a group of external sensors and probes manufactured by different vendors in a manner that requires the user to have little or no knowledge of their unique characteristics. Our universal smart instrument (the “Ubiquitor”) consists of a reusable foundation component which includes a wireless gateway (which allows the instrument to connect to the smartphone via Bluetooth and wifi technology), a universal smart application software (our “Application”) which is installed on the user’s smartphone allowing the sensor readouts to be monitored on the smartphone screen. The Ubiquitor also connects to a variety of individual scientific sensors that collect unique data points, from moisture, light, and airflow to other things like electricity voltage meters and a wide variety of applications. These data points are then sent wirelessly to the smartphone and the data is organized on the smartphone screen. The smartphone, foundation, and sensor readouts together perform the functions of many traditional scientific and engineering instruments and are intended to replace the traditional, wired stand-alone instruments at a fraction of their cost.

 

The Company and Perfecular were entities under common control; therefore, in accordance with Financial Accounting Standards Board (FASB) Accounting Standards Codification (“ASC”) 805-50-45, the acquisition of Perfecular was accounted for as a business combination between entities under common control and treated similar to a pooling of interest transaction.

 

Perfecular Inc. was founded in September 2009 and is headquartered in Walnut, California, and is engaged in designing certain digital sensor products and sells a broad selection of horticultural sensors and filters in North America and Europe.

 

Note 2 – Summary of Significant Accounting Policies

 

Basis of Presentation

 

The accompanying consolidated financial statements include the accounts of Focus Universal Inc. and its wholly-owned subsidiary, Perfecular Inc. All intercompany balances and transactions have been eliminated upon consolidation. The Company’s consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”). Certain reclassifications have been made to the consolidated financial statements for prior years to the current year’s presentation. Such reclassifications have no effect on net income as previously reported. Please see Note 12, Restatement.

 

Segment Reporting

 

The Company currently has one operating segment. In accordance with ASC 280, Segment Reporting (“ASC 280’), the Company considers operating segments to be components of the Company’s business for which separate financial information is available that evaluated regularly by the Management in deciding how to allocate resources and in assessing performance. The Management reviews financial information presented on a consolidated basis for purposes of allocation resources and evaluating financial performance. Accordingly, the Company has determined that it has a single operating and reportable segment.

 

 

 

 

 F-4 
 

 

Cash and Cash Equivalents

 

The Company considers all highly liquid investments with a maturity of three months or less to be cash and cash equivalents. At times, such investments may be in excess of Federal Deposit Insurance Corporation (FDIC) insurance limit. There were no cash equivalents held by the Company at June 30, 2018 and December 31, 2017.

 

Concentrations of Credit Risk

 

Financial instruments that potentially subject the Company to concentrations of credit risk consist primarily of cash and cash equivalents. The Company limits its exposure to credit loss by investing its cash with high credit quality financial institutions.

 

Fair Value of Financial Instruments

 

The Company follows paragraph ASC 825-10-50-10 for disclosures about fair value of its financial instruments and paragraph ASC 820- 10-35-37 (“Paragraph 820-10-35-37”) to measure the fair value of its financial instruments. Paragraph 820-10-35-37 establishes a framework for measuring fair value in accounting principles generally accepted in the United States of America (U.S. GAAP), and expands disclosures about fair value measurements.

 

To increase consistency and comparability in fair value measurements and related disclosures, Paragraph 820-10-35-37 establishes a fair value hierarchy which prioritizes the inputs to valuation techniques used to measure fair value into three (3) broad levels. The fair value hierarchy gives the highest priority to quoted prices (unadjusted) in active markets for identical assets or liabilities and the lowest priority to unobservable inputs. The three (3) levels of fair value hierarchy defined by Paragraph 820-10-35-37 are described below:

 

  · Level 1: quoted market prices available in active markets for identical assets or liabilities as of the reporting date.
     
  · Level 2: pricing inputs other than quoted prices in active markets included in Level 1, which are either directly or indirectly observable as of the reporting date.
     
  · Level 3: Pricing inputs that are generally observable inputs and not corroborated by market data.

 

Financial assets are considered Level 3 when their fair values are determined using pricing models, discounted cash flow methodologies or similar techniques and at least one significant model assumption or input is unobservable.

 

The fair value hierarchy gives the highest priority to quoted prices (unadjusted) in active markets for identical assets or liabilities and the lowest priority to unobservable inputs. If the inputs used to measure the financial assets and liabilities fall within more than one level described above, the categorization is based on the lowest level input that is significant to the fair value measurement of the instrument.

 

The carrying amount of the Company’s financial assets and liabilities, such as cash and cash equivalent, prepaid expenses, accounts payable and accrued expenses, approximate their fair value because of the short maturity of those instruments.

 

Transactions involving related parties cannot be presumed to be carried out on an arm's-length basis, as the requisite conditions of competitive, free-market dealings may not exist. Representations about transactions with related parties, if made, shall not imply that the related party transactions were consummated on terms equivalent to those that prevail in arm's-length transactions unless such representations can be substantiated.

 

It is not however practical to determine the fair value of advances from stockholders, if any, due to their related party nature.

 

 

 

 

 F-5 
 

 

Inventory

 

Inventory is valued at the lower of the inventory’s cost (first in, first out basis) or the current market price of the inventory. Management compares the cost of inventory with its market value and an allowance is made to write down inventory to market value, if lower. Inventory allowances are recorded for obsolete or slow-moving inventory based on assumptions about future demand and marketability of products, the impact of new product introductions and specific identification of items, such as discontinued products. These estimates could vary significantly from actual requirements if future economic conditions, customer inventory levels or competitive conditions differ from expectations. The Company regularly reviews the value of inventory based on historical usage and estimated future usage. As of June 30, 2018 and December 31, 2017, inventory reserve amounted to $66,155 and $27,067, respectively.

 

Property and Equipment

 

Property and equipment are stated at cost. Depreciation is computed using the straight-line method. Estimated useful lives range from three to seven years on all categories of depreciable assets. The cost and accumulated depreciation of assets sold or retired are removed from the respective accounts and any gain or loss is included in earnings. Maintenance and repairs are expensed currently. Major renewals and betterments are capitalized.

 

Long-term assets of the Company are reviewed when circumstances warrant as to whether their carrying value has become impaired. The Company considers assets to be impaired if the carrying value exceeds the future projected cash flows from related operations. The Company also re-evaluates the periods of amortization to determine whether subsequent events and circumstances warrant revised estimates of useful lives.

 

Revenue Recognition

 

The Company applies ASC 605-10-S99-1 for revenue recognition. The Company recognizes revenue when it is realized or realizable and earned. The Company considers revenue realized or realizable and earned when all of the following criteria are met: (i) persuasive evidence of an arrangement exists, (ii) the product has been shipped or the services have been rendered to the customer, (iii) the sales price is fixed or determinable, and (iv) collectability is reasonably assured.

 

The Company derives its revenues from sales contracts with its customer with revenues being generated upon rendering of services. Persuasive evidence of an arrangement is demonstrated via invoice; service is considered provided when the service is delivered to the customers; and the sales price to the customer is fixed upon acceptance of the purchase order and there is no separate sales rebate, discount, or volume incentive.

 

Perfecular’s primary business functions are designing and marketing products. Tianjin Guanglee serves as an original equipment manufacturer (“OEM”). Perfecular determines the product specifications and the sales prices, and bears physical loss risks during shipping. Perfecular collects full amount of accounts receivable from customers through direct wire transfers or letters of credit. Tianjin Guanglee invoices Perfecular for the manufacturing costs and Perfecular pays these invoices.

 

Allowance for doubtful accounts

 

The Company provides an allowance for doubtful accounts equal to the estimated uncollectible amounts. The Company's estimate is based on historical collection experience and a review of the current status of trade accounts receivable. It is reasonably possible that the Company's estimate of the allowance for doubtful accounts will change. Management evaluated that there was no allowance for doubtful accounts at June 30, 2018 and December 31, 2017 based on collection history.

 

Research and development

 

Research and development costs are expensed as incurred. Research and development costs primarily consist of efforts to refine existing product models and develop new product models.

 

 

 

 

 F-6 
 

 

Related Parties

 

The Company follows ASC 850-10 for the identification of related parties and disclosure of related party transactions. Pursuant to ASC 850-10-20 the related parties include: a) affiliates of the Company; b) entities for which investments in their equity securities would be required, absent the election of the fair value option under the Fair Value Option Subsection of ASC 825–10–15, to be accounted for by the equity method by the investing entity; c) trusts for the benefit of employees, such as pension and profit-sharing trusts that are managed by or under the trusteeship of management; d) principal owners of the Company; e) management of the Company; f) other parties with which the Company may deal if one party controls or can significantly influence the management or operating policies of the other to an extent that one of the transacting parties might be prevented from fully pursuing its own separate interests; and g) other parties that can significantly influence the management or operating policies of the transacting parties or that have an ownership interest in one of the transacting parties and can significantly Influence the other to an extent that one or more of the transacting parties might be prevented from fully pursuing its own separate interests.

 

The consolidated financial statements shall include disclosures of material related party transactions, other than compensation arrangements, expense allowances, and other similar items in the ordinary course of business. However, disclosure of transactions that are eliminated in the preparation of consolidated financial statements is not required in those statements. The disclosures shall include: (a) the nature of the relationship(s) involved; (b) a description of the transactions, including transactions to which no amounts or nominal amounts were ascribed, for each of the periods for which income statements are presented, and such other information deemed necessary to an understanding of the effects of the transactions on the consolidated financial statements; (c) the dollar amounts of transactions for each of the periods for which income statements are presented and the effects of any change in the method of establishing the terms from that used in the preceding period; and (d) amounts due from or to related parties as of the date of each balance sheet presented and, if not otherwise apparent, the terms and manner of settlement.

 

Commitments and Contingencies

 

The Company follows ASC 450-20 to report accounting for contingencies. Certain conditions may exist as of the date the consolidated financial statements are issued, which may result in a loss to the Company but which will only be resolved when one or more future events occur or fail to occur. The Company assesses such contingent liabilities, and such assessment inherently involves an exercise of judgment. In assessing loss contingencies related to legal proceedings that are pending against the Company or unasserted claims that may result in such proceedings, the Company evaluates the perceived merits of any legal proceedings or unasserted claims as well as the perceived merits of the amount of relief sought or expected to be sought therein.

 

If the assessment of a contingency indicates that it is probable that a material loss has been incurred and the amount of the liability can be estimated, then the estimated liability would be accrued in the Company’s consolidated financial statements. If the assessment indicates that a potential material loss contingency is not probable but is reasonably possible, or is probable but cannot be estimated, then the nature of the contingent liability, and an estimate of the range of possible losses, if determinable and material, would be disclosed.

 

Loss contingencies considered remote are generally not disclosed unless they involve guarantees, in which case the guarantees would be disclosed. Management does not believe, based upon information available at this time that these matters will have a material adverse effect on the Company’s financial position, results of operations or cash flows. However, there is no assurance that such matters will not materially and adversely affect the Company’s business, financial position, and results of operations or cash flows.

 

Stock Based Compensation

 

The Company accounts for employee and non-employee stock awards under ASC 718, whereby equity instruments issued to employees for services are recorded based on the fair value of the instrument issued and those issued to non-employees are recorded based on the fair value of the consideration received or the fair value of the equity instrument, whichever is more reliably measurable.

 

 

 

 

 

 F-7 
 

 

There were no outstanding stock options as of June 30, 2018 and December 31, 2017.

 

Income Tax Provision

 

Income taxes are accounted for using the asset and liability method. Deferred income taxes are provided for temporary differences in recognizing certain income, expense and credit items for financial reporting purposes and tax reporting purposes. Such deferred income taxes primarily relate to the difference between the tax basis of assets and liabilities and their financial reporting amounts. Deferred tax assets and liabilities are measured by applying enacted statutory tax rates applicable to the future years in which deferred tax assets or liabilities are expected to be settled or realized. There was no material deferred tax asset or liabilities as of June 30, 2018 and December 31, 2017.

 

As of June 30, 2018 and December 31, 2017, the Company did not identify any material uncertain tax positions.

 

Net Income (Loss) Per Common Share

 

Net income (loss) per common share is computed pursuant to ASC 260-10-45. Basic net income (loss) per common share is computed by dividing net income (loss) by the weighted average number of common shares outstanding during the period.

 

Diluted net income (loss) per common share is computed by dividing net income (loss) by the weighted average number of shares of common stock and potentially outstanding shares of common stock during the period to reflect the potential dilution that could occur from common shares issuable through contingent shares issuance arrangement, stock options or warrants.

 

There were no potentially dilutive debt or equity instruments issued and outstanding at any time during the six months ended June 30, 2018 and 2017.

 

Cash Flows Reporting

 

The Company adopted ASC 230-10-45-24 for cash flows reporting, classifies cash receipts and payments according to whether they stem from operating, investing, or financing activities and provides definitions of each category, and uses the indirect or reconciliation method (“Indirect method”) as defined by ASC 230-10-45-25 of the FASB Accounting Standards Codification to report net cash flow from operating activities by adjusting net income to reconcile it to net cash flow from operating activities by removing the effects of (a) all deferrals of past operating cash receipts and payments and all accruals of expected future operating cash receipts and payments and (b) all items that are included in net income that do not affect operating cash receipts and payments. The Company reports the reporting currency equivalent of foreign currency cash flows, using the current exchange rate at the time of the cash flows and the effect of exchange rate changes on cash held in foreign currencies is reported as a separate item in the reconciliation of beginning and ending balances of cash and cash equivalents and separately provides information about investing and financing activities not resulting in cash receipts or payments in the period pursuant to ASC 830-230-45-1.

 

Subsequent Events

 

The Company follows the guidance in ASC 855-10-50 for the disclosure of subsequent events. The Company will evaluate subsequent events through the date when the financial statements were issued. Pursuant to ASU 2010-09, the Company as an SEC filer considers its financial statements issued when they are widely distributed to users, such as through filing them on EDGAR.

 

 

 

 

 F-8 
 

 

Note 3 – Property and Equipment

 

At June 30, 2018 and December 31, 2017, property and equipment consisted of the following:

 

   June 30, 
2018
   December 31, 
2017
 
Computers  $1,029   $1,029 
Furniture and fixture   8,850    8,850 
Total cost   9,879    9,879 
Less accumulated depreciation   (4,633)   (3,543)
Property and equipment, net  $5,246   $6,336 

 

Depreciation expense for the six months ended June 30, 2018 and 2017 amounted to $1,090 and $914, respectively.

 

Note 4 – Convertible Promissory Notes

 

On June 30, 2017 and July 28, 2017, the Company received $420,000 and $80,000, respectively through a series of two unsecured convertible promissory notes from the same unrelated third party (the “2017 Notes”). The 2017 Notes bear interest at 10% per annum, are due on June 30, 2020 and July 28, 2020 respectively and are unsecured. The 2017 Notes contain a provision that allows the note holder to convert the outstanding balance into shares of the Company's common stock at $1.75 per share. The Company determined that the convertible promissory notes contain beneficial conversion features that are valued at $420,000 and $80,000 respectively; however, the amount recorded as the beneficial conversion feature is limited to the face amount of the convertible promissory note. This beneficial conversion feature of $420,000 and $80,000 has been recorded in the financial statements to additional paid-in capital and as a discount to the convertible promissory payable. The debt discounts are being amortized over the terms of the 2017 Notes. The Company recognized interest expense of $336,713 during the six months ended June 30, 2018 related to the amortization of the debt discounts. On June 27, 2018, the convertible holder elected the right to convert all of convertible notes to common stock at $1.75 per share. Total conversion amounted to $548,949, 313,686 shares.

 

Note 5 – Related Party Transactions

 

Revenue generated from Vitashower Corp., a company owned by the CEO, amounted to $10,575 and $6,571 for the sixed months ended June 30, 2018 and 2017, respectively, $7,375 and $3,008 for the three months ended June 30, 2018 and 2017, respectively. Account receivable balance due from Vitashower Corp. amounted to $19,200 and $564 as of June 30, 2018 and December 31, 2017, respectively.

 

On May 30, 2018, the CEO and majority shareholder of the Company lent the Company $50,000 for operation use. The loan had no interest and is due upon demand. The loan was repaid on July 12, 2018.

 

Compensation for services provided by the President and Chief Executive Officer for the six months ended June 30, 2018 and 2017 amounted to $30,000 and $30,000, respectively and three months ended June 30, 2018 and 2017 amounted to $30,000 and $30,000, respectively.

 

Note 6 – Business Concentration and Risks

 

Major customers

 

One customer accounted for 100% of the total accounts receivable as of December 31, 2017. The customer did not have balance due and receivable as of June 30, 2018

 

 

 

 

 F-9 
 

 

Major vendors

 

One vendor accounted for 80% and 92% of total accounts payable at June 30, 2018 and December 31, 2017, respectively.

 

Note 7 – Commitments and Contingencies

 

On April 24, 2017, we entered into a two-year industrial/commercial lease within a larger multi-tenant industrial complex with Walnut Park Business Center, LLC. We leased a 2,800-square foot warehouse with a 1,400-square foot office space inside which will allow us to assemble our products as well as efficiently run our administrative operations in the same building. The lease commenced on May 1, 2017 and will end on April 30, 2019. We will pay $3,500 per month until May 1, 2018 when the rent will increase to $3,605 per month. The warehouse is located at 820511 East Walnut Drive North, Walnut, California. Rent expense under this lease will be recognized over the life of the lease term on a straight-line basis. Straight-line monthly rent expense over the life of the lease will be $3,553.

 

Total rent expense was $24,815 and $22,000 for the six months ended June 30, 2018 and 2017, respectively.

 

Future minimum lease commitments are as follows:

 

December 31,  Rent Expense 
2018  $21,630 
2019   14,420 
Thereafter    

 

Note 8 – Stockholders’ Equity

 

Shares authorized

 

Upon formation the total number of shares of all classes of stock which the Company is authorized to issue is seventy-five million (75,000,000) shares of common stock, par value $0.001 per share.

 

Common stock

 

During the six months ended June 30, 2018, the Company had the following transactions in its common stock:

 

·issued 5,755,927 shares through private placement at $1.75 per share.
·issued 313,686 shares for conversion debt rendered valued at $548,949 or $1.75 per share.

 

As of June 30, 2018 the Company had 40,644,319 shares of common stock issued and outstanding.

 

Note 9 – Subscription Receivable

 

As of June 30, 2018, the Company issued 3,581,328 shares through private placement with subscription receivable amounting to $6,267,360 or $1.75 per share.

 

Note 10 – Shares to be Issued, Common Shares

 

During the six months ended June 30, 2018, the Company incurred professional expenses amounting to $457,377 which were paid for by issuing common 261,358 shares at $1.75 per share.

 

Note 11 – Going Concern

 

In August 2014, the FASB issued ACU 2014-15, Disclosure of Uncertainties about an Entity’s Ability to Continue as a Going Concern. The new standard requires management to assess the company’s ability to continue as a going concern. Disclosures are required if there is substantial doubt as to the company’s continuation as a going concern within one year after the issue date of financial statements. The standard provides guidance for making the assessment, including consideration of management’s plans which may alleviate doubt regarding the Company’s ability to continue as a going concern. ASU 2014-15 is effective for years ending after December 15, 2016. The Company has adopted this standard for the year ending December 31, 2017 and six months ending June 30, 2018.

 

 

 

 F-10 
 

 

These financial statements have been prepared on a going concern basis, which assumes the Company will continue to realize its assets and discharge its liabilities in the normal course of business. The continuation of the Company as a going concern is dependent upon the continued financial support from its shareholders, the ability of the Company to repay its debt obligations, to obtain necessary equity financing to continue operations, and the attainment of profitable operations. Recently, the Company has devoted a substantial amount of resources to research and development to bring the Ubiquitor and its mobile application to full production and distribution. For the six months ended June 30, 2018, the Company had net loss of $1,299,111 and negative cash flow from operating activities of $528,684. As of June 30, 2018 the Company also had an accumulated deficit of $3,277,905. These factors raise certain doubts regarding the Company’s ability to continue as a going concern. There are no assurances, however, that the Company will be successful in obtaining an adequate level of financing for the long-term development and commercialization of its Ubiquitor product.

 

 

Note 12 – Restatement

 

   Previously reported         Restated 
   For the six months ended         For the six months ended 
   6/30/2017   Adjustment     6/30/2017 
               
Revenue  $211,086    680,427  {a}  $891,513 
Revenue - related party       6,571  {b}   6,571 
Total revenue   211,086           898,084 
                  
Cost of Revenue   65,498    686,998  {a}   752,496 
                  
Gross Profit   145,588           145,588 
                  
Operation Expenses:                 
Compensation - officers   60,000           60,000 
Research and development   109,929           109,929 
Professional fees   69,777           69,777 
General and administrative   123,083           123,083 
Total Operating Expenses   362,789           362,789 
                  
Loss from Operations   (217,201)          (217,201)
                  
Other Income (Expense)                 
Interest expense, net   53           53 
Other income   4,763           4,763 
Total other expense   4,815           4,815 
                  
Loss before income taxes   (212,885)          (212,885)
                  
Income tax expense   800           800 
                  
Net Loss  $(213,685)         $(213,685)
                  
Weight Average Number of Common Shares Outstanding - Basic and Diluted   34,574,706           34,574,706 
                  
Net Loss per common share                 
Basic and diluted  $(0.01)         $(0.01)

 

{a} The Company previously recorded shipment of sales shipped directly from vendor to customer as net of cost of goods sold. The Company corrected the error by recording sales at gross amount and separately record cost of goods sold amount.

 

{b} Revenue generated from Vitashower Corp., a company owned by the CEO, amounted to $6,571 for the six months ended June 30, 2017 was reclassified to be separately disclosed.

 


 F-11 
 

 

   Previously reported         Restated 
   For the three months ended         For the three months ended 
   6/30/2017   Adjustment     6/30/2017 
               
Revenue  $128,896    496,172  {a}  $625,068 
Revenue - related party       3,563  {b}   3,563 
Total revenue   128,896           628,631 
                  
Cost of Revenue   45,163    499,736  {a}   544,898 
                  
Gross Profit   83,733           83,733 
                  
Operation Expenses:                 
Compensation - officers   30,000           30,000 
Research and development   55,453           55,453 
Professional fees   41,797           41,797 
General and administrative   60,673           60,673 
Total Operating Expenses   187,923           187,923 
                  
Loss from Operations   (104,190)          (104,190)
                  
Other Income (Expense)                 
Interest expense, net   20           20 
Other income               
Total other expense   20           20 
                  
Loss before income taxes   (104,170)          (104,170)
                  
Income tax expense   800           800 
                  
Net Loss  $(104,970)         $(104,970)
                  
Weight Average Number of Common Shares Outstanding - Basic and Diluted   34,574,706           34,574,706 
                  
Net Loss per common share                 
Basic and diluted  $(0.00)         $(0.00)

 

{a} The Company previously recorded shipment of sales shipped directly from vendor to customer as net of cost of goods sold. The Company corrected the error by recording sales at gross amount and separately record cost of goods sold amount.

 

{b} Revenue generated from Vitashower Corp., a company owned by the CEO, amounted to $3,563 for the three months ended June 30, 2017 was reclassified to be separately disclosed.

 

Note 13 – Subsequent Events

 

The Company has evaluated all events that occurred after the consolidated balance sheet date through the date when the consolidated financial statements were issued to determine if they must be reported.

 

From July 1, 2018 to July 17, 2018, the Company received additional $5,658,243 for subscription receivable.

 

On July 1, 2018, the Company entered into an Advisory Agreement with Oakshore Consulting (“Oakshore”). Pursuant to the Advisory Agreement, Oakshore provided consulting services to the Company starting from July 2018. The total advisory fee is $8,000 per month and payable on the sixth day of each month. The advisory fee may be paid in either cash or in the Company’s common stock. A finder’s fee will be 8% of the enterprise value of any acquisition closed during the term of this advisory agreement or any acquisition introduced to the Company. Both the Company and Oakshore may terminate this advisory agreement by providing written notice thirty days in advance of intended termination.

 

 

 

 

 

 

 F-12 
 

 

ITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS AND PLAN OF OPERATION

 

The following discussion of our financial condition and results of operations should be read in conjunction with, and is qualified in its entirety by, the consolidated financial statements and notes thereto included in, Item 1 in this Quarterly Report on Form 10-Q. This item contains forward-looking statements that involve risks and uncertainties. Actual results may differ materially from those indicated in such forward-looking statements.

 

Forward-Looking Statements

 

This Quarterly Report on Form 10-Q and the documents incorporated herein by reference contain forward-looking. Such forward-looking statements are based on current expectations, estimates, and projections about our industry, management beliefs, and certain assumptions made by our management. Words such as "anticipates", "expects", "intends", "plans", "believes", "seeks", "estimates", variations of such words, and similar expressions are intended to identify such forward-looking statements. These statements are not guarantees of future performance and are subject to certain risks, uncertainties, and assumptions that are difficult to predict; therefore, actual results may differ materially from those expressed or forecasted in any such forward-looking statements. Unless required by law, we undertake no obligation to update publicly any forward-looking statements, whether as a result of new information, future events, or otherwise. However, readers should carefully review the risk factors set forth herein and in other reports and documents that we file from time to time with the Securities and Exchange Commission, particularly the Report on Form 10-K, Form 10-Q and any Current Reports on Form 8-K.

 

Narrative Description of the Business 

 

Focus Universal Inc. (“the Company”, “we”, “us” or “our”) currently conducts business as a handheld sensor systems and filters wholesaler to distribution platforms. We are a universal smart instrumentation platform developer and universal smart device manufacturer. We are also a wholesaler of various air filtration systems. We are currently in the process of researching, developing, and manufacturing a universal smart instrument device and working on specializing in the development and commercialization of such universal smart technologies and instruments. We define universal smart technology as commercial technology with an integrated platform, which provides a unique and universal solution for test and measurement made up of off-the-shelf parts. We are working on developing a universal sensor node and gateway system that uses the data processing capabilities of a smartphone to display readings of multiple probe modules.

 

Our universal smart instrumentation technology features a Universal Smart Instrumentation Platform (“USIP”) which generalizes instruments into a reusable foundation representing a majority part of the instruments, and architecture-specific components (sensor modules), which together replaces the functions of traditional instruments at a fraction of their cost. The USIP has an open architecture incorporating a variety of individual instrument functions, sensors and probes from different industries and vendors. The platform features the ability to connect thousands of sensors or probes. This technology addresses major limitations present in traditional hardware and represents a technological advancement in the Internet of Things marketplace. We call this device the “Ubiquitor” because it can be used to wirelessly measure and test a variety of electrical and physical phenomena such as voltage, current, temperature, pressure, sound, light, and humidity.

 

The Ubiquitor, which we have created and have manufactured in limited quantities, utilizes a standard desktop computer with Mac OS, Windows OS, an Android-based or iOS-based smartphone, or mobile tablet device as a platform that communicates with a group of sensors or probes manufactured by different vendors in a manner that requires the user to have little or no knowledge of their unique characteristics. The data readout is displayed on the computer, smartphone, or tablet display in a program or application we have created for Windows PC and are creating for MacOS. We are designing the application software (the “App”) to have a graphical representation of control and indicator elements common in real instruments such as knobs, buttons, dials, and graphs, etc. Our developers are designing and implementing a soft control touch screen interface which supports real-time data monitoring and facilitates instrument control and operation.

 

Until March 31, 2016, we offered a full range of web services, including web marketing services, social and viral marketing campaigns, search engine optimization consulting, custom web design, website usability consulting and web analytics implementation. We generate our revenue from providing these services to small and medium sized businesses. We focused on providing one-off services, such as development of a fully functioning website or creation of a marketing strategy plan, to small business clients.

 

 

 

 

 4 
 

 

Through a merger with Perfecular Inc, we strategically expanded our services to the manufacture and marketing of high-tech electronic devices. We sell handheld sensor systems and filters wholesale to distribution platforms and are working on developing a universal sensor node and gateway system that use the data processing capabilities of a smartphone to display readings of multiple probe modules. We are also researching the development of an anti-counterfeit authentication technology that we believe could address the problem of counterfeit production by attempting to authenticate consumer goods.

 

Our current services include:

 

Scientific Instrument Research and Development and Sales

 

Through our acquisition of Perfecular Inc., we entered into the scientific instrument industry, specifically the instrument sensor industry. Instrument sensors are devices specifically designed and constructed for sensing and measuring physical variables that are useful in: (i) industrial operations; (ii) environmental, commercial and medical applications; (iii) research and development in a variety of industries; and (iv) the daily lives of electronics consumers.

 

We believe that instrument sensors are important in modern science, having applications in both the industrial and educational fields. In recent years, significant progress has been made in instruments and instrumentation systems. The performance of measuring and monitoring instruments has improved considerably in the computer age. Analog instruments are used to indicate the magnitude of the quantity in the form of pointer movements. Digital instruments, on the other hand, specify the quantity in a digital readout format, they can be read easily, and are more accurate than the analog multi-meters because the pointer movements can be easily misread and are often not permanently stored, reducing interpolation and reading errors. Digital instruments offer significant advantages over analog devices. The auto-polarity function of digital devices prevents various problems. Parallax error which occurs when the pointer of an analog instrument is viewed from a different angle, which may cause users to see and read a different value are eliminated as well. Digital instruments are free from wear and potential shock failures because they have no moving parts. With the advancements in technology of integrated circuits, digital instruments are becoming increasingly compact and accurate. Key market players of analog and digital instruments include Thermo Fisher Scientific, Danaher Corporation, Mettler Toledo, Metrohm USA, Hanna Instruments, Agilent Technologies, and Perkin Elmer.

 

Most modern instruments are digital. They are designed for measuring various physical quantities in objects; and consist of the following functional components:

 

Data acquisition. This is the process of sampling signals that measure real world physical conditions and converting the resulting samples into digital numeric values that can be manipulated by a microprocessor. The components of data acquisition systems include:

 

a.Sensors, to convert physical parameters to electrical signals;
b.Signal conditioning circuitry, to convert sensor signals into a form that can be converted to digital values;
c.Analog-to-digital converters, to convert conditioned sensor signals to digital values. It normally operates on conditioned signals, that is, signals that have already been filtered and amplified by analog circuits.

 

Storage and communication components. Application-specific input/output (I/O) components. In digital instrumentation systems, the transmission of data between devices is realized relatively easily by using serial or parallel transmission techniques.

 

Ancillaries such as displays and power supplies and application specific software.

 

Traditional hardware-centered instrumentation systems are made up of multiple stand-alone instruments that are interconnected to carry out a determined measurement or control an operation. They have fixed vendor-defined functionality, and the components that comprise the instruments are also fixed and permanently associated with each other. All software and measurement circuitry, packaged onto the traditional instrument, are provided with a finite list of fixed-functionality using the instrument’s front panel. They all tended to be box-shaped objects with a control panel and a display. Stand-alone electronic instruments are very powerful and large, expensive, and cumbersome. They also require a lot of power, and often have excessive amounts of features that are not user friendly. Users generally cannot extend or customize them. The knobs and buttons on the instrument, the built-in circuitry, and the functions available to the user, are specific to the nature of the instrument.

 

 

 

 5 
 

 

Virtual instruments represent a fundamental shift from traditional hardware-centered instrumentation systems, to software-centered systems that exploit the computing power, productivity, display, and connectivity capabilities of popular desktop computers and workstations. The functionality of these stand-alone instruments can be implemented in a digital environment by using computers, plug-in data-acquisition boards, and support software to implement the functions of the system. The plug-in data acquisition boards enable the interface of analog signals to computer, and the software allows programming of the computer to look and function as an instrument. The major advantage of virtual instrumentation is its flexibility. Changing function simply requires a modification of the supporting software. Whereas the same change in a traditional system may require adding or substituting a stand-alone instrument, which is more difficult and also more expensive. Virtual instruments also offer advantages in displaying and storing information. Computer display can show more colors and allow users to quickly change the format of displaying the data that is received by the instrument.

 

Instrument inter-operability and connectivity allow devices to communicate and work with other instruments manufactured by different vendors, in a manner that requires the user to have little or no knowledge of the unique characteristics of those instruments. Traditional instruments, including traditional hardware-centered instrumentations and software centered virtual instrumentations, are specifically designed, constructed and refined to perform one or more specific tasks. When manufacturers develop these instruments they naturally seek ways to differentiate their products from those of their competitors. Most of the instruments on the market come with a variety of connectivity technologies and do not have the built-in firmware and software to support the connectivity and inter-operability of instruments. Even instruments within in the same class, from different vendors, are not compatible. In 1998, National Instruments, along with other companies including Agilent, Advantest, Anritsu, Ascor, BAE systems, Boeing, Ericsson, Genrad, Honeywell, IFR, Keithley, Lecroy, Nokia, Northrop Grumman, Racal, Ratheon, Rohde & Schwarz, Smiths, Tektronix, Teradyne, and Wavetek formed the interchangeable virtual machine foundation. Interchangeable Virtual Instruments (IVI) is a revolutionary standard for instrument driver software technology. It attempts to standardize the commands to which specific kinds of instruments respond, and also makes it possible to interchange instruments in a test system without drastically revising the application software and maximizing interchangeability across instrument brands. Unfortunately, while the instrument driver did simplify software development and maintenance, it didn’t address hardware obsolescence as each manufacturer had their own and none were compatible. Current applications are limited to large, expensive test and measurement instruments.

 

A universal instrument is a versatile device which combines many individual instrument functions, sensors and probes in a single unit. It has a primary purpose, but also incorporates other instrument’s functionalities. One instrument could perform many different measurements and control and substitute many other instruments. It utilizes a variety of probes to connect to the device for a wide variety of process measurement and control. A universal instrument offers superior sensor or probe compatibility, versatility, inter-operability, connectivity and scalability. Theoretically, it is feasible to design a universal instrument which is compatible with all sensors or probes on the market, and capable of monitoring and controlling any combination of sensors or probes.

 

Despite the undoubted usefulness of the universal instruments, one of the major obstacles that prevent the universal instruments from being adopted by end users is their cost. The cost of a $10 traditional instrument, which incorporates the functions of a $1000 instrument, may have to increase its cost to the order of $1000. The end user who just needs a $10 traditional instrument for his applications certainly does not have the motivation to spend $1000 for functions he does not need. Functionality always needs to be balanced against cost. The knobs and buttons on the instrument, the built-in circuitry, and the functions available to the user, are specific to the nature of the instrument, making them very expensive and hard to adapt.

 

Smartphones and tablets have been considered recreational devices for communicating, playing games and streaming videos, but they are also one of the most powerful tools engineers use for designing, validating, and producing products. These ubiquitous smartphones perform better than most instrumentation in many fields. Because of their network connectivity, smartphones and tablets are great tools for remotely viewing measurements. In addition, the processing capabilities have exploded in recent years with processors and data capability rivaling that of very recent laptop computers. Thus, their small size and processing power also makes them effective for portable measurements. The ubiquity of wireless connectivity, unlimited data plans, and more powerful cellular networks combined with increasing functionality and the speed of connected devices and mobile networks will further drive consumer demand for more cost effective wireless smartphone based instruments. Building an application for a smartphone or tablet and turning a smartphone or tablet to an instrument is not a trivial task. Many of the industrial instrument manufacturers have limited or no expertise programming for mobile platforms and designing wireless hardware. To help industrial instrument manufacturers take advantage of these smart devices, Perfecular Inc., has dedicated many years of research and development efforts into designing, manufacturing, marketing and promoting wireless smart technology and products for industrial measuring instruments.

 

Our universal smart development protocol focuses not only on the design of the hardware and software modules, but also on the design of the overall universal smart instruments system, guided by the structured, universal and modular principles. We make our development open to industrial instrument manufacturers, software, and hardware developers.

 

 

 

 

 6 
 

 

Compatibility: The compatibility in universal smart instrument system refers not only to the compatibility between the same types of industrial sensor instruments from different manufactures, but also to the compatibility between various industrial instrument types. The full inter-operability and absolute instrument interchangeability is constantly addressed in our development protocol.

 

Universality: It is our goal to incorporate as many functionalities of the traditional industrial sensor instruments into a single unit, allowing different data acquisition sensor modules to execute on the same mobile platform. Thus, the interoperability between various sensors or probes can be achieved.

 

Upgradeability: Most traditional industrial instrument sensor interfaces are unidirectional applications, meaning the instrument performs its task and transmits results to the interface device in one direction only. They only perform monitoring tasks and share a majority of functions of the bi-directional controlling instruments, however, they cannot be upgraded to controllers. End users have to purchase a new controlling instrument for their applications. Taking advantage of the secure bi-directional wireless communications and interface supported by smartphones or mobile devices, universal smart instruments, which deliver data back-and-forth between the smartphones and industrial sensors, can be readily modified or upgraded by adding the corresponding actuators for controlling applications. Sensors or probes measure the output performance of the device being controlled and give feedback to the input actuators that can make corrections towards the desired performance.

 

Expandability and Scalability: Similar to sensor network technology, universal smart instruments are more flexible than sensor networks. They can currently monitor and control a few hundreds of sensors or probes, they automatically identify and configure the corresponding graphical user interfaces. End users are free to add or removes sensors or probes. All communication protocols supported by smartphones are integrated in the software design including WI-FI, blue tooth, cellular network technology and wired form through the audio port on the smartphone.

 

Security: Universal smart instruments have the sensor security built-in data acquisition module and help companies meet sensor security requirements, preventing unauthorized users from accessing the sensor measurements and control. Unauthorized access of the universal smart instruments sensors is forbidden.

 

Modularity: Increasing instrument complexity is driving instruments to become more modular. The knobs and buttons on the instrument, the built-in circuitry, and the functions available to the user used in traditional stand-alone instruments duplicate these components for each instrument, adding cost and size. Universal smart instruments divide all instruments into three parts: smartphones including their application software, wireless communication module (we called the universal smart device), which is not needed in the wired form, and task-specific data acquisition module. The smartphone is used and purchased, no research and development is needed. Universal smart devices were developed and manufactured by Perfecular Inc. Both hardware and software, including wired or wireless communication protocols, were developed and well tested. The only work needed to be done are the design and manufacture of the task-specific data acquisition, which is just a fraction of the traditional stand-alone instrument design. The high degree of modularity saves a lot of time in development, maintenance, and support. Modular hardware and software limits the time needed to test products so developers can spend more of their energy on innovation.

 

Universal smart instruments share many similarities, in terms of functionalities and advantages, with virtual instruments. They are both soft-centered technologies. However, developing the software for virtual instrumentation is not trivial, a programming language or special software can be used. Professional software engineers with virtual instrument expertise are needed. A virtual instrument consists of an industry-standard computer or workstation equipped with powerful application software, cost-effective hardware such as plug-in boards, and driver software, which together perform the functions of traditional instruments. Its primary focus is on large, expensive, testing and measurement instruments, not portable devices. Because of the unique nature of the smartphone operating systems such as IOS or Android, which are significantly different from those used in industry-standard computers or workstations, the migration of virtual instrument technology from industry-standard computers or workstations to mobile devices such as smartphones is not straight forward. Virtual Instrument Software Architecture, commonly known as VISA is a comprehensive package for configuring, programming, and troubleshooting instrumentation systems comprised of GPIB, Serial, VXI, PXI, Ethernet, and USB interfaces which are wired forms of communications and widely used in traditional instruments. Universal smart instruments adopt ubiquitous wireless connectivity for communications between a sensor and the smartphone. The wired form communications used in virtual instruments cannot be applied to wireless communications supported by smartphone. Industry-standard computers or workstations have more powerful computational capability, memories and storage to deal with demanding applications in modern industrial measurement systems than those found on smartphones. The software architecture designed in universal smart instruments is significantly different from that of virtual instruments. There are many applications running on smartphones. Universal smart instrument software should not interfere with other software. Mobile application programming and wireless communication technologies are the major holdup for instrument engineers who do not have the mobile application programming and wireless communication expertise. Focus Universal Inc. provided a comprehensive package including both universal instrument application software for smartphones or mobile devices, and hardware for wireless communications between smartphones and sensors, called universal smart device. These technologies, including instrument protocol, completely eliminate those holdups. No smartphone programming and/or wireless communication knowledge are required, instrument engineers just use their traditional embedded programming and spend a small fraction of their time to code the instrument specification into the data acquisition modules including sensors or probes according to the universal smart protocol, and then enjoy the huge hardware reduction and more functionalities provided or supported by the smartphone. The instrument design was simplified to the data acquisition design; all other functions were achieved by the universal smart instrument software. Universal smart technology offers the potential to standardization of the instrument design.

 

 

 

 7 
 

 

Universal smart technologies are designed so that a single software package and hardware support all instrumentation applications, no new software and hardware is needed. Traditional instrument manufacturers still migrate from their traditional instruments to the state-of-the-art universal wireless smart instruments seamlessly. Instrumentation is a huge industry which covers a variety of industry fields including commercial, industrial, military, medical, healthcare, scientific and daily life. It is very difficult to estimate its market value; McKinsey Global Institute estimated that the impact of the Internet of Things on the global economy might be as high as $6.2 trillion by 20251. Cisco predicts the global Internet of Things market will be $14.4 trillion by 2022.2 The Internet of Things is just a fraction of the instrumentation market.

 

Our Approach to Measurement and Sensing

 

We offer a different approach that links handheld devices and sensors with common smartphone computing power through an application on the smartphone in both IOS and Android devices. Tapping into the computing power of a smartphone enables a measurement device to increase its capabilities.

 

We also offer an array of traditional handheld meters through our wholesale distribution platform.

 

Ubiquitor Wireless Universal Sensor Device

 

Our “Ubiquitor,” device will be a handheld fully modular system with a universal sensor node and gateway system that will use a smartphone as the output display module that displays the readings of various probe modules. We have initial functioning prototype devices created and intend to develop this into full-scale production. The Ubiquitor will be a wireless sensor device that combines measuring tools with smartphone technology to quickly deliver sensor node data on desktop and mobile phone screens. The Ubiquitor’s sensor analytics system will integrate event-monitoring, storage and analytics software in a cohesive package that provides a holistic view of sensor data it is reading.

 

The physical hardware consists of:

 

  1. The sensor probes, which come in hundreds of different varieties of sensor instruments in the form of a USB stick, with both male and female ports; and

 

  2. The main hardware gateway, a small cell phone size device with integrated circuits.

 

This device can connect up to 2.5 kilometers of sensor instruments, and integrate data using embedded software to display the data and all analytics onto a digital screen (desktop or mobile displays) using a Wi-Fi connection. Most types of probes can connect to the hardware. If the sensor size is bigger than the standard probe size, it is possible to simply use a USB cable to connect the probe and the hub. All data and analytics are displayed on a single screen, with tools that record and keep track of all measurements, and sort and display analytic information in easy to read charts.

 

The Ubiquitor is a general platform that collects data in real time, up to 100hz per second, and thus is intended to be adapted to many industrial uses.

 

The Ubiquitor is a multipurpose wireless intelligent sensor device. Its greatest advantage is universal compatibility. Currently, the Ubiquitor device could simultaneously accommodate more than 256 different types of sensor heads. Users could use their smartphones to simultaneously operate and monitor over 256 kinds of sensor readings. With our technology, users only need to obtain the sensor heads, facilitating ease and convenience of use. Using a smartphone, users can collect and analyze data in real time.

 

________________________

1 http://www.mckinsey.com/industries/high-tech/our-insights/the-internet-of-things-sizing-up-the-opportunity.

2 http://www.forbes.com/sites/louiscolumbus/2015/12/27/roundup-of-internet-of-things-forecasts-and-market-estimates-2015/#2305058e48a0.

 

 8 
 

 

By using the smartphone as a substitute platform, we believe we will achieve the following efficiencies:

 

  1.

Cut production costs. Smartphone technology will advance and become more widely used than the vast majority products on the small sensor device market. By utilizing smartphone technology, the Ubiquitor will add superior functionality and performance, improve the product’s quality and cutting production costs.

 

  2. Reduce the effort required to develop a new sensor product. With the Ubiquitor, we believe that there will be no need for device manufacturers to research and develop the new monitoring and operating components because they will just need to develop new sensor heads based on our software technology.

 

  3. Reduce clutter. It is anticipated that the Ubiquitor dispenses with the hassle of hooking up cables, since it is based on wireless transmission of data.

 

Other Traditional Handheld Meters 

 

Filter and Handheld Meter Wholesaler

 

We are a wholesaler of various filtration products and digital meters. We source our products from manufacturers in China and then sell to a major U.S. distributor who resells our products directly to consumers through retail distribution channels. Specifically, we sell the following products.

 

Fan Speed Adjuster device. We provide a fan speed adjuster device to retailers and distributors. Designed specifically for centrifugal fans with brushless motors, our adjuster device helps ensure longer life by preventing damage to fan motors by adjusting the speed of centrifugal fans without causing the motor to hum. These devices are rated for 350 watts max, have 120VAC voltage capacity and feature an internal, electronic auto-resetting circuit breaker.

 

Carbon filter devices. We also sell two types of carbon filter devices to distributors. These Carbon filter devices are professional grade filters specifically designed and used to filter air in greenhouses that might be polluted by fermenting organics. One of these filters can be attached to a centrifugal fan to scrub the air in a constant circle or can be attached to an exhaust line as a single pass filter, which moves air out of the growing area and filters unwanted odors and removes pollens, dust, and other debris in the air. The other filter is designed to be used with fans from 0-6000 C.F.M.

 

HEPA filtration device. We provide an organic air high efficiency particulate arrestance (“HEPA”) filtration device at wholesale prices to distributors and retailers. Manufactured, tested, certified, and labeled in accordance with current HEPA filter standards, this device is targeted towards greenhouses and grow rooms and designed to keep insects, bacteria, and mold out of grow rooms. We sell these devices in various sizes.

 

Digital light meter. We provide a handheld digital light meter that is used to measure luminance in fc units, or foot-candles. The meter we sell is designed to be full cosine corrected for the angular incidence of light (meaning if you are not holding the sensor perpendicular to the light source, the sensor will still read the light correctly). The meter has a built-in low battery indicator and is designed to accurately measure to 40,000 FC.

 

Quantum par meter. We provide a handheld quantum par meter used to measure photosynthetically active radiation (“PAR”). This fully portable handheld PAR meter is designed to measure PAR flux in wavelengths ranging from 400 to 700 nm. It is designed to measure up to 10,000 umol.

 

Strategy

 

Strategy and Marketing Plan

 

We have designed, manufactured, marketed and distributed our electronic measurement devices, such as temperature humidity meters, digital meters, quantum PAR meters, pH meters, TDS meters and CO2 monitors, for many years and have many loyal customers. The universal smart technology has been applied to our existing traditional devices and demonstrated functionality and hardware cost savings. We believe we have achieved hardware cost savings in the range of 70% to 90%. Prototypes were sent to our customers for demonstrations and evaluation. Currently, we are in the stage of producing a pilot manufacturing run. The first round of pilot production was completed in May 2016. The second round of pilot production was completed in July 2016.

 

 

 9 
 

 

Smartphones are an integral part of our wireless universal smart technology system. Both wireless and wired communication connectivity are used and targeted on different applications. In wired connectivity, the data acquisition module is connected through the audio port in the smartphone. The smartphone is used to replace a traditional instrument. Compared with the wireless solution, the wireless communication module or even the power supply used for data acquisition module are eliminated in the design, as a consequence of this some hardware costs are saved. End users are not able to access the sensors or probes remotely. We believe that the instruments based on wired universal smart technology are not as convenient as their wireless counterparts. Currently, in the industry, however, wired instruments are cheaper.

 

We believe that being the first ones in the market provides a significant and sustained market-share advantage over later competitors. We first focus on our existing instruments and convert them to universal smart devices and market them to our existing customers.

 

We are putting together an internal sales team with the proceeds of the offering in order to get established for the marketing efforts.

 

We believe that wireless universal smart technology will play a critical role for traditional industrial instrument manufacturers, as it is too expensive and difficult to develop industrial instrument sensors for medium or smaller companies. The cost factor is the first consideration when deciding whether a company wants to develop smart wireless technologies and implement them in their products. There are hundreds of thousands of instrument manufacturers and trillion-dollar revenues for this manufacturing industry in China. We plan to open a sales department in China dedicate to promoting our technologies to local instrument manufacturers.

 

Smartphones have been seamlessly integrated into our daily life. A large number of functions and services have become accessible to the masses through the use of smart phones. The proliferation of the smartphone and its user-friendly interface, which allows access to digital information, will cause these devices to become a crucial part of our wireless universal smart instruments.

 

Intellectual Property Protection

 

After the merger, on January 20, 2016 we filed provisional patent application number 62/281,104 with attorney docket number PER1.PAU.01.0 and Confirmation No. 2212. Prior to its expiration, on November 4, 2016, we filed a full utility patent application with the U.S. Patent and Trademark Office (number 15/344,041). On November 4, 2016 we filed a U.S. patent application number 15/344,041 with the U.S. Patent and Trademark Office. On March 5, 2018, Focus Universal Inc. (the "Company") issued a press release announcing that the U.S. Patent and Trademark Office has issued an Issue Notification for U.S. Patent Application No. 9924295 entitled “Universal Smart Device,” which covers a patent application regarding the Company’s Universal Smart Device. The USPTO had previously issued a Notice of Allowance for the same patent. Barring any unforeseen circumstances, this patent, when issued, will be valid until 2036. We filed the trademark “Ubiquitor” on July 10, 2016, under Serial No.:  87068020.

 

Competitors

 

There are several competitors we have identified in the wireless sensor node industry, including traditional instruments or devices manufacturers such as Hanna Instruments or Extech Instruments.

 

Hach developed and launched SC1000 Multi-parameter Universal Controller, a probe module for connecting up to 8 SC sensors and their products are not compatible with smart phones yet and we believe their price-point is still prohibitive to consumers.

 

Monnit Corporation offers a range of wireless or remote sensors. Many of Monnit’s products are web-based wireless sensors usually are not portable because of the power consumption. Also, the sensors real-time updates are slow and we believe security of the web-based sensor data acquisition also may be a concern. In addition to purchasing the device, consumers usually have to pay monthly fee for using web-based services.

 

We are not trying to compete with traditional instruments or device manufacturers because we utilize our Ubiquitor universal smart device in conjunction with our generic instruments smartphone application, which we believe will be a completely different product category.

 

Market Potential

 

We believe that wireless universal smart technology will play a critical role for traditional instrument manufacturers, as it is too expensive and difficult to develop for medium or smaller companies. The cost factor is the first consideration when deciding whether a company wants to develop smart wireless technologies and implement them in their products or use them in their field testing. We also hope to play a role in academic laboratories, particularly with smaller academic laboratories who are sensitive to price.

 

 

 

 

 10 
 

 

Results of operations for the three months ended June 30, 2018 compared to the three months ended June 30, 2017.

 

Revenue, cost of sales and gross profit

 

Our consolidated gross revenue for the three months ended June 30, 2018 and 2017, was $39,780 and $628,631,  respectively, which included revenue from related party of $3,200 and $3,563, respectively. Our cost of consolidated cost of revenues for the three months ended June 30, 2018 and 2017, was $9,761 and $544,898, respectively, resulting in a gross profit of $30,019 and $83,733 for the three months ended June 30, 2018 and 2017, respectively. The Company has been phasing out the sale of its older products while currently developing new products for sale.

 

 

Operating Costs and Expenses

 

The major components of our operating expenses for the three months ended June 30, 2018 and 2017 are outlined in the table below:

 

   For the
Three Months
Ended
June 30,
2018
   For the
Three Months
Ended
June 30,
2017
   Increase
(Decrease)
$
 
Officer compensation  $30,000   $30,000   $ 
Research and development   56,771    55,453    1,318 
Professional fees   513,736    41,797    471,939 
General and administrative   135,874    60,673    75,201 
Total operating expenses  $736,381   $187,923   $548,458 

  

General and administrative expenses of $135,874 incurred during the three months ended June 30, 2018 primarily consisted of marketing fee of $56,000, office rent of $14,315 and salaries of $28,404. General and administrative expenses of $60,673 incurred during the three months ended June 30, 2017 primarily consisted of office rent of $14,879 and salaries of $27,482. The increase was mainly due to increased marketing fee in 2018.

 

Professional fees increased from $41,797 during the three months ended June 30, 2017 to $513,736 during the three months ended June 30, 2018, an increase of $471,939. The increase of professional fees is mainly due to services incurred for private placement and professional engaged for potential investment.

 

Officer compensation was $30,000 for three months ended June 30, 2017 and 2018. Research and development was $56,771 and $55,453 for the three months ended June 30, 2018 and 2017.

 

Net Losses

 

During the three months ended June 30, 2018 and 2017, we incurred net losses of $1,095,278 and $104,970 respectively, due to the factors discussed above.

 

Results of operations for the six months ended June 30, 2018 compared to the six months ended June, 2017.

 

Revenue, cost of sales and gross profit

 

Our consolidated gross revenue for the six months ended June 30, 2018 and 2017, was $108,332 and $898,084, respectively, which included revenue from related party of $10,575 and $6,571, respectively. Our cost of consolidated cost of revenues for the six months ended June 30, 2018 and 2017, was $27,685 and $752,496, respectively, resulting in a gross profit of $80,647 and $145,588 for the six months ended June 30, 2018 and 2017, respectively. The Company has been phasing out the sale of its old products while currently developing new products for sale.

 

 

 

 

 11 
 

 

Operating Costs and Expenses

 

The major components of our operating expenses for the three months ended June 30, 2018 and 2017 are outlined in the table below: 

 

   For the 
Six Months 
Ended 
June 30, 
2018
   For the 
Six Months 
Ended 
June 30, 
2017
   Increase 
(Decrease) 
$
 
Officer compensation  $60,000   $60,000   $ 
Research and development   107,789    109,929    (2,140)
Professional fees   563,897    69,778    494,119 
General and administrative   205,037    123,582    81,455 
Total operating expenses  $936,723   $363,289   $573,434 

 

General and administrative expenses of $205,037 incurred during the six months ended June 30, 2018 primarily consisted of market fee of $68,000, office rent of $24,815 and salaries of $54,427. General and administrative expenses of $363,289 incurred during the six months ended June 30, 2017 primarily consisted of office rent of $22,000 and salaries of $55,171. The increase was mainly due to increased marketing fee incurred in 2018.

 

Professional fees increased from $69,778 during the six months ended June 30, 2018 to $563,897 during the six months ended June 30, 2017, an increase of $494,119. The increase of professional fees is mainly due to services incurred for private placement and professional engaged for potential investment.

 

Officer compensation was $60,000 for six months ended June 30, 2017 and 2018. Research and development was $107,789 and $109,929 for the six months ended June 30, 2018 and 2017.

 

Net Losses

 

During the six months ended June 30, 2018 and 2017, we incurred net losses of $1,299,111 and $213,685 respectively, due to the factors discussed above.

 

Liquidity and Capital Resources

 

Working Capital 

 

   June 30, 
2018
   December 31,
2017
 
Current Assets  $3,808,402   $476,985 
Current Liabilities   (380,730)   (481,790)
Working Capital  $3,427,672   $(4,805)

 

Cash Flows

 

The table below, for the periods indicated, provides selected cash flow information: 

 

   For the 
Six Months 
Ended 
June 30, 
2018
   For the 
Six Months 
Ended 
June 30, 
2017
 
Net cash used in operating activities  $(528,684)  $(109,177)
Net cash used in investing activities        
Net cash provided by financing activities   3,855,512    420,000 
Net change in cash and cash equivalents  $3,326,828   $310,823 

 

 

 

 

 12 
 

 

Cash Flows from Operating Activities

 

Our net cash outflows from operating activities of $528,684 for the six months ended June 30, 2018 was primarily the result of our net loss of $1,299,111, and changes in our operating assets and liabilities. Our net cash outflows from operating activities of $109,177 for the six months ended June 30, 2017, was primarily the result of our net loss of $213,685 and changes in our operating assets and liabilities.

 

We expect that cash flows from operating activities may fluctuate in future periods as a result of a number of factors, including fluctuations in our net revenues and operating results, utilization of new revenue streams, collection of accounts receivable, and timing of billings and payments.

 

Cash Flows from Investing Activities

 

The Company did not incur any cash flow from investing activities for the six months ended June 30, 2018 and 2017.

 

Cash Flows from Financing Activities

 

Our net cash inflows from financing activities of $3,855,512 for the six months ended June 30, 2018 was primarily due to the sale of common stock through private placement. Our net cash inflows from financing activities of $420,000 for the six months ended June 30, 2017 was due to the issuance of a convertible promissory note.

  

Off Balance Sheet Arrangements

 

As of June 30, 2018, we did not have any off-balance-sheet arrangements, as defined in Item 303(a)(4)(ii) of Regulation SK.

 

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

 

We are a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and are not required to provide the information required under this item.

 

ITEM 4. CONTROLS AND PROCEDURES

 

Evaluation of Disclosure Controls

 

Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we have conducted an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures, as defined in Rules 13a15(e) and 15d15(e) under the Securities and Exchange Act of 1934, at the end of the period covered by this report. Based on this evaluation, our principal executive officer and principal financial officer concluded as of the evaluation date that our disclosure controls and procedures were effective such that the material information required to be included in our Securities and Exchange Commission reports is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms relating to our company, particularly during the period when this report was being prepared.

 

Our management concluded we did not maintain effective controls over the Company’s financial reporting. The material weaknesses in our internal control over financial reporting, caused principally by inadequate staffing and technical expertise in key positions, resulted in overly relying on outside consultants to make numerous adjustments to our financial statements. Additionally, the significant deficiencies or material weaknesses could result in future material misstatement of the consolidated financial statements that would not be prevented or detected. Management has concluded that the identified control deficiencies constitutes a material weakness.

 

Changes in internal control over financial reporting.

 

There were no changes in our internal control over financial reporting during our most recent fiscal quarter that materially affected, or were reasonably likely to materially affect, our internal control over financial reporting.

 

Limitations on the Effectiveness of Internal Controls

 

Disclosure controls and procedures, no matter how well designed and implemented, can provide only reasonable assurance of achieving an entity's disclosure objectives. The likelihood of achieving such objectives is affected by limitations inherent in disclosure controls and procedures. These include the fact that human judgment in decision-making can be faulty and that breakdowns in internal control can occur because of human failures such as simple errors or mistakes or intentional circumvention of the established process.

 

 

 

 13 
 

 

PART II. OTHER INFORMATION

 

ITEM 1. LEGAL PROCEEDINGS

 

We were not subject to any legal proceedings during the six months ended June 30, 2018 and there are currently no legal proceedings, to which we are a party, which could have a material adverse effect on our business, financial condition or operating results.

 

ITEM 1A. RISK FACTORS

 

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

 

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS.

 

On July 17, 2018, we filed a current report on form 8-K announcing that we completed the sale of a total of 6,069,613 shares of our common stock (the “Shares”) in a private placement to certain eligible investors for an aggregate purchase price of $10,621,823 or $1.75 per Share.

 

We have not yet deployed the proceeds of the offering, but we intend to use the proceeds as follows.

 

   Use of Proceeds 
Use  Dollar Amount   Percentage of Gross Proceeds 
Research and Development  $1,200,000    11.3% 
Manufacturing Devices  $1,500,000    14.1% 
Building Purchase*  $4,620,000    43.5% 
Equipment  $400,000    3.7% 
Marketing and Business Development  $1,600,000    15.1% 
Accounting, Audit and Legal  $80,000    0.8% 
Working Capital  $1,221,823    11.5% 
Gross Proceeds from the Offering  $10,621,823    100% 

 

Research and Development – To fully develop our business plan, we intend to continue researching and developing the design, manufacture, marketing and promotion of our Ubiquitous platform. For these purposes we intend to use approximately $1,200,000 to fund our research and the development of our products.

 

Manufacturing Devices – We will use approximately $1,500,000 to manufacture our Ubiquitor devices—this includes paying third party manufacturers to manufacture the parts of the Ubiquitor in China and then to pay the employees in our U.S. warehouse to assemble the Ubiquitor devices prior to distribution. We need a custom manufacturing facility for the assembly of our Ubiquitor devices which is why we cannot outsource the assembly to a less expensive third party.

 

*Building Purchase – We do not expect to remain in the current property for the full term of our lease, due to the fact that if this offering is successful, our board of directors approved the purchase of a new building with mixed use of an office and warehouse, addressed at 2311 E Locust St, Ontario, CA, 91761. The property consists of an industrial type, two-story building, with a total building area of 30,740 square feet that we can install substantial fixtures required for the assembly of our Ubiquitor devices. 10,000 square feet will be utilized for office space; and 20,000 square feet for warehouse space. The property includes 58 parking spaces. The purchase price for the property is approximately $4.62 million dollars. We intend to purchase the building outright and refinance if and when we need more operating capital.

 

 

 

 

 14 
 

 

Equipment – To develop our business we intend to use $400,000 for the purchase or lease of necessary manufacturing equipment. Our products are manufactured in China but will be assembled in the United States in our warehouse.

 

Marketing and Business Development – We intend to use approximately $1,600,000 to put together an internal sales team dedicated to our marketing and business development strategies, focusing on marketing our products directly to wholesalers; and to promoting our technology and the Ubiquitous platform directly to industrial and academic users.

 

Accounting, Audit, and Legal – Being an emerging growth company under the JOBS Act means that we have certain cost related to accounting, auditing and legal fees. We intend to use $80,000 to cover such costs.

 

Working Capital – We intend to use a portion of the proceeds, equivalent to $1,221,823 to fund our working capital and capital expenditure requirements.

 

The foregoing represents our best estimate as to how the proceeds of the Offering will be expended. We reserve the right to redirect any portion of the funds either among the items referred to above, or such other projects as our management considers to be in our best interest.

 

ITEM 3.  DEFAULTS UPON SENIOR SECURITIES

 

No senior securities were issued and outstanding during the six-month periods ended June 30, 2018 or 2017.

 

ITEM 4.  MINE SAFETY DISCLOSURES

 

Not applicable to our Company.

 

ITEM 5.  OTHER INFORMATION

 

Our common stock has been quoted on the OTCQB and on the OTC Link since July 31, 2014 under the symbol “FCUV”. 

 

 

 

 

 

 

 

 15 
 

 

ITEM 6. EXHIBITS AND REPORTS ON FORM 8-K

 

Exhibits

 

The following financial information is filed as part of this report:

 

(a)   (1) FINANCIAL STATEMENTS
   
  (2) SCHEDULES
   
  (3) EXHIBITS. The following exhibits required by Item 601 to be filed herewith are incorporated by reference to previously filed documents:

  

  

Exhibit

Number

Description
   
2.1 Agreement and Plan of Merger by and among Focus Universal Inc., FCUV Acquisition Corp. and Perfecular Inc. filed with the SEC on January 5, 2016.
   
3.1 Articles of Incorporation. Incorporated by reference to the Company’s Registration Statement on Form S-1 filed with the SEC on December 26, 2013.
   
3.2 Bylaws. Incorporated by reference to the Company’s Registration Statement on Form S-1 filed with the SEC on December 26, 2013.
   
4.2 Subscription Agreement. Incorporated by reference to the Company’s Registration Statement on Form S-1 filed with the SEC on December 26, 2013.
   
10.1 Stock Purchase Agreement dated December 29, 2014. Incorporated by reference to the Company’s 8-K filed with the SEC on January 5, 2015.
   
10.2 Unsecured Demand Promissory Note dated February 1, 2015 in the amount of $20,000 filed with the SEC on July 28, 2015
   
10.3 Unsecured Demand Promissory Note dated February 25, 2015 in the amount of $100,000 filed with the SEC on July 28, 2015
   
10.4 Master Revolving Note dated May 21, 2015 in the amount of $1,000,000 filed with the SEC on July 28, 2015
   
31.1 Certification of CEO pursuant to Sec. 302
   
31.2 Certification of CFO pursuant to Sec. 302
   
32.1 Certification of CEO pursuant to Sec. 906
   
32.2 Certification of CFO pursuant to Sec. 906
   
101.INS* XBRL Instances Document
101.SCH* XBRL Taxonomy Extension Schema Document
101.CAL* XBRL Taxonomy Extension Calculation Linkbase Document
101.DEF* XBRL Taxonomy Extension Definition Linkbase Document
101.LAB* XBRL Taxonomy Extension Label Linkbase Document
101.PRE* XBRL Taxonomy Extension Presentation Linkbase Document

 

* To be filed by amendment.

 

 

 

 

 16 
 

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

  Focus Universal Inc.
       
Dated:  August 14, 2018 By:  

/s/ Desheng Wang

Desheng Wang

Chief Executive Officer

       
Dated: August 14, 2018 By:  

/s/ Duncan Lee

Duncan Lee

Chief Financial Officer

       

 

 

 

 

 

 

 

 

 17